[PATCH v2 0/2] phy: rockchip-inno-usb2: correct 480MHz clk_ops callbacks and stable time

[PATCH v2 0/2] phy: rockchip-inno-usb2: correct 480MHz clk_ops callbacks and stable time

[William Wu]

This series try to correct the 480MHz output clock of USB2 PHY
clk_ops callback and fix the delay time. It aims to make the
480MHz clock more sensible and stable.

Tested on rk3366/rk3399 EVB board.

William Wu (2):
  phy: rockchip-inno-usb2: correct clk_ops callback
  phy: rockchip-inno-usb2: correct 480MHz output clock stable time

 drivers/phy/phy-rockchip-inno-usb2.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

-- 
2.0.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/2] phy: rockchip-inno-usb2: correct clk_ops callback

[William Wu]

Since we needs to delay ~1ms to wait for 480MHz output clock
of USB2 PHY to become stable after turn on it, the delay time
is pretty long for something that's supposed to be "atomic"
like a clk_enable(). Consider that clk_enable() will disable
interrupt and that a 1ms interrupt latency is not sensible.

The 480MHz output clock should be handled in prepare callbacks
which support gate a clk if the operation may sleep.

Signed-off-by: William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 drivers/phy/phy-rockchip-inno-usb2.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index ac20310..365e077 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -153,7 +153,7 @@ static inline bool property_enabled(struct rockchip_usb2phy *rphy,
 	return tmp == reg->enable;
 }
 
-static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -172,7 +172,7 @@ static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
 	return 0;
 }
 
-static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -181,7 +181,7 @@ static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
 	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
 }
 
-static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
@@ -197,9 +197,9 @@ rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
 }
 
 static const struct clk_ops rockchip_usb2phy_clkout_ops = {
-	.enable = rockchip_usb2phy_clk480m_enable,
-	.disable = rockchip_usb2phy_clk480m_disable,
-	.is_enabled = rockchip_usb2phy_clk480m_enabled,
+	.prepare = rockchip_usb2phy_clk480m_prepare,
+	.unprepare = rockchip_usb2phy_clk480m_unprepare,
+	.is_prepared = rockchip_usb2phy_clk480m_prepared,
 	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
 };
 
-- 
2.0.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] phy: rockchip-inno-usb2: correct clk_ops callback

[Doug Anderson]

William

On Sun, Nov 13, 2016 at 11:01 PM, William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> Since we needs to delay ~1ms to wait for 480MHz output clock
> of USB2 PHY to become stable after turn on it, the delay time
> is pretty long for something that's supposed to be "atomic"
> like a clk_enable(). Consider that clk_enable() will disable
> interrupt and that a 1ms interrupt latency is not sensible.
>
> The 480MHz output clock should be handled in prepare callbacks
> which support gate a clk if the operation may sleep.
>
> Signed-off-by: William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>  drivers/phy/phy-rockchip-inno-usb2.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] phy: rockchip-inno-usb2: correct clk_ops callback

[wlf]

Hi Doug,

在 2016年11月15日 02:15, Doug Anderson 写道:
> William
>
> On Sun, Nov 13, 2016 at 11:01 PM, William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>> Since we needs to delay ~1ms to wait for 480MHz output clock
>> of USB2 PHY to become stable after turn on it, the delay time
>> is pretty long for something that's supposed to be "atomic"
>> like a clk_enable(). Consider that clk_enable() will disable
>> interrupt and that a 1ms interrupt latency is not sensible.
>>
>> The 480MHz output clock should be handled in prepare callbacks
>> which support gate a clk if the operation may sleep.
>>
>> Signed-off-by: William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> ---
>>   drivers/phy/phy-rockchip-inno-usb2.c | 12 ++++++------
>>   1 file changed, 6 insertions(+), 6 deletions(-)
> Reviewed-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

Thanks! I'll add  Reviewed-by.
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/2] phy: rockchip-inno-usb2: correct 480MHz output clock stable time

[William Wu]

We found that the system crashed due to 480MHz output clock of
USB2 PHY was unstable after clock had been enabled by gpu module.

Theoretically, 1 millisecond is a critical value for 480MHz
output clock stable time, so we try to change the delay time
to 1.2 millisecond to avoid this issue.

And the commit ed907fb1d7c3 ("phy: rockchip-inno-usb2: correct
clk_ops callback") used prepare callbacks instead of enable
callbacks to support gate a clk if the operation may sleep. So
we can switch from delay to sleep functions.

Signed-off-by: William Wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v2:
- use usleep_range() function instead of mdelay()

 drivers/phy/phy-rockchip-inno-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index 365e077..578290b 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -166,7 +166,7 @@ static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 			return ret;
 
 		/* waitting for the clk become stable */
-		mdelay(1);
+		usleep_range(1200);
 	}
 
 	return 0;
-- 
2.0.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/2] phy: rockchip-inno-usb2: correct 480MHz output clock stable time

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1610 bytes --]

Hi William,

[auto build test ERROR on rockchip/for-next]
[also build test ERROR on v4.9-rc5 next-20161114]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/William-Wu/phy-rockchip-inno-usb2-correct-clk_ops-callback/20161114-150723
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: i386-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/phy/phy-rockchip-inno-usb2.c: In function 'rockchip_usb2phy_clk480m_prepare':
>> drivers/phy/phy-rockchip-inno-usb2.c:169:3: error: too few arguments to function 'usleep_range'
      usleep_range(1200);
      ^~~~~~~~~~~~
   In file included from drivers/phy/phy-rockchip-inno-usb2.c:19:0:
   include/linux/delay.h:48:6: note: declared here
    void usleep_range(unsigned long min, unsigned long max);
         ^~~~~~~~~~~~

vim +/usleep_range +169 drivers/phy/phy-rockchip-inno-usb2.c

   163		if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
   164			ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
   165			if (ret)
   166				return ret;
   167	
   168			/* waitting for the clk become stable */
 > 169			usleep_range(1200);
   170		}
   171	
   172		return 0;

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 56817 bytes --]