From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Yan Subject: [PATCH v2 02/10] dt-bindings: add documentation for rk1108 cru Date: Mon, 14 Nov 2016 20:03:01 +0800 Message-ID: <1479124981-24181-1-git-send-email-andy.yan@rock-chips.com> References: <1479124550-24037-1-git-send-email-andy.yan@rock-chips.com> Return-path: In-Reply-To: <1479124550-24037-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, Andy Yan List-Id: devicetree@vger.kernel.org From: Shawn Lin This adds the dt-binding documentation for the clock and reset unit found on Rockchip rk1108 SoCs. Signed-off-by: Shawn Lin Signed-off-by: Andy Yan --- Changes in v2: None .../bindings/clock/rockchip,rk1108-cru.txt | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt new file mode 100644 index 0000000..4d2356b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt @@ -0,0 +1,60 @@ +* Rockchip RK1108 Clock and Reset Unit + +The RK1108 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk1108-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "cif_clkout" - output clock for the cif - optional + - "mipi_csi_clkout" - output clock for the mipi csi - optional + - "pclkin_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "mac_ref_clkout" - output clock of the pll in the mac phy + +Example: Clock controller node: + + cru: cru@20200000 { + compatible = "rockchip,rk1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@10230000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html