From: Noam Camus <noamca@mellanox.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, daniel.lezcano@linaro.org
Cc: tglx@linutronix.de, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-snps-arc@lists.infradead.org,
Vineet.Gupta1@synopsys.com, Alexey.Brodkin@synopsys.com,
Noam Camus <noamca@mellanox.com>
Subject: [RESEND PATCH v7 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
Date: Wed, 16 Nov 2016 08:31:12 +0200 [thread overview]
Message-ID: <1479277873-18994-3-git-send-email-noamca@mellanox.com> (raw)
In-Reply-To: <1479277873-18994-1-git-send-email-noamca@mellanox.com>
From: Noam Camus <noamca@mellanox.com>
nps_setup_clocksource() should take node as only argument as defined by
typedef int (*of_init_fn_1_ret)(struct device_node *)
Therefore need to replace:
int __init nps_setup_clocksource(struct device_node *node, struct clk *clk)
with
int __init nps_setup_clocksource(struct device_node *node)
This patch also serve as preparation for next patch which add support
for clockevents to nps400.
Specifically we add new function nps_get_timer_clk() to serve clocksource
and later clockevent registration.
Signed-off-by: Noam Camus <noamca@mellanox.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-nps.c | 65 +++++++++++++++++++++++---------------
1 files changed, 39 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
index 70c149a..0c8e21f 100644
--- a/drivers/clocksource/timer-nps.c
+++ b/drivers/clocksource/timer-nps.c
@@ -46,7 +46,35 @@
/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
-static unsigned long nps_timer_rate;
+static int __init nps_get_timer_clk(struct device_node *node,
+ unsigned long *timer_freq,
+ struct clk **clk)
+{
+ int ret;
+
+ *clk = of_clk_get(node, 0);
+ if (IS_ERR(*clk)) {
+ pr_err("timer missing clk");
+ return PTR_ERR(*clk);
+ }
+
+ ret = clk_prepare_enable(*clk);
+ if (ret) {
+ pr_err("Couldn't enable parent clk\n");
+ clk_put(*clk);
+ return ret;
+ }
+
+ *timer_freq = clk_get_rate(*clk);
+ if (!(*timer_freq)) {
+ pr_err("Couldn't get clk rate\n");
+ clk_disable_unprepare(*clk);
+ clk_put(*clk);
+ return -EINVAL;
+ }
+
+ return 0;
+}
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
@@ -55,26 +83,24 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
}
-static int __init nps_setup_clocksource(struct device_node *node,
- struct clk *clk)
+static int __init nps_setup_clocksource(struct device_node *node)
{
int ret, cluster;
+ struct clk *clk;
+ unsigned long nps_timer1_freq;
+
for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
nps_msu_reg_low_addr[cluster] =
nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
- NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+ NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
- ret = clk_prepare_enable(clk);
- if (ret) {
- pr_err("Couldn't enable parent clock\n");
+ ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
+ if (ret)
return ret;
- }
- nps_timer_rate = clk_get_rate(clk);
-
- ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
- nps_timer_rate, 301, 32, nps_clksrc_read);
+ ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
+ nps_timer1_freq, 300, 32, nps_clksrc_read);
if (ret) {
pr_err("Couldn't register clock source.\n");
clk_disable_unprepare(clk);
@@ -83,18 +109,5 @@ static int __init nps_setup_clocksource(struct device_node *node,
return ret;
}
-static int __init nps_timer_init(struct device_node *node)
-{
- struct clk *clk;
-
- clk = of_clk_get(node, 0);
- if (IS_ERR(clk)) {
- pr_err("Can't get timer clock.\n");
- return PTR_ERR(clk);
- }
-
- return nps_setup_clocksource(node, clk);
-}
-
CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
- nps_timer_init);
+ nps_setup_clocksource);
--
1.7.1
next prev parent reply other threads:[~2016-11-16 6:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-16 6:31 [RESEND PATCH v7 0/3] Add clockevent for timer-nps driver to NPS400 SoC Noam Camus
2016-11-16 6:31 ` [RESEND PATCH v7 1/3] soc: Support for NPS HW scheduling Noam Camus
2016-11-16 6:31 ` Noam Camus [this message]
2016-11-16 6:31 ` [RESEND PATCH v7 3/3] clocksource: Add clockevent support to NPS400 driver Noam Camus
[not found] ` <1479277873-18994-1-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-11-17 17:50 ` [RESEND PATCH v7 0/3] Add clockevent for timer-nps driver to NPS400 SoC Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479277873-18994-3-git-send-email-noamca@mellanox.com \
--to=noamca@mellanox.com \
--cc=Alexey.Brodkin@synopsys.com \
--cc=Vineet.Gupta1@synopsys.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox