devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Sekhar Nori <nsekhar@ti.com>, Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Russell King <linux@armlinux.org.uk>
Cc: linux-devicetree <devicetree@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-drm <dri-devel@lists.freedesktop.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Jyri Sarha <jsarha@ti.com>,
	arm-soc <linux-arm-kernel@lists.infradead.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH 1/3] ARM: da850-lcdk: add the dumb-vga-dac node
Date: Fri, 25 Nov 2016 17:03:13 +0100	[thread overview]
Message-ID: <1480089795-29811-2-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1480089795-29811-1-git-send-email-bgolaszewski@baylibre.com>

Add the dumb-vga-dac node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 58 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi     | 17 ++++++++++++
 2 files changed, 75 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 8411a91..6952c68 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -50,6 +50,53 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga_bridge {
+		compatible = "dumb-vga-dac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&display_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -227,3 +274,14 @@
 		};
 	};
 };
+
+&display {
+	status = "okay";
+};
+
+&display_out {
+	display_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ff13e95..8e30d9b 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -453,6 +453,23 @@
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				display_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				display_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
 		};
 	};
 	aemif: aemif@68000000 {
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2016-11-25 16:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-25 16:03 [PATCH 0/3] ARM: dts: da850: tilcdc related DT changes Bartosz Golaszewski
2016-11-25 16:03 ` Bartosz Golaszewski [this message]
2016-11-25 16:03 ` [PATCH 2/3] ARM: dts: da850: specify the maximum bandwidth for tilcdc Bartosz Golaszewski
2016-11-25 16:03 ` [PATCH 3/3] ARM: dts: da850: enable the memctrl and mstpri nodes per board Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480089795-29811-2-git-send-email-bgolaszewski@baylibre.com \
    --to=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frowand.list@gmail.com \
    --cc=jsarha@ti.com \
    --cc=khilman@baylibre.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nsekhar@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).