From mboxrd@z Thu Jan 1 00:00:00 1970 From: Archit Taneja Subject: [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Date: Tue, 29 Nov 2016 11:37:41 +0530 Message-ID: <1480399662-8858-2-git-send-email-architt@codeaurora.org> References: <1474622430-6704-1-git-send-email-architt@codeaurora.org> <1480399662-8858-1-git-send-email-architt@codeaurora.org> Return-path: In-Reply-To: <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, Archit Taneja , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Add the regulator supply properties needed by ADV7511 and ADV7533. The regulators are specified as optional properties since there can be boards which have a fixed supply directly routed to the pins, and these may not be modelled as regulator supplies. Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Acked-by: Rob Herring Signed-off-by: Archit Taneja --- v3: - Revert back to having a common avdd-supply property for the 1.8V supplies Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59..13d53bc 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -56,6 +56,15 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD + pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also powers + up the A2VDD pin. +- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on + ADV7511 and V3P3 on ADV7533. + +ADV7533 specific supplies: +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. Required nodes: -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html