[PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio

[Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>]

Signed-off-by: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
---
 .../devicetree/bindings/misc/mux-controller.txt    | 127 +++++++++++++++++++++
 .../devicetree/bindings/misc/mux-gpio.txt          |  68 +++++++++++
 MAINTAINERS                                        |   5 +
 3 files changed, 200 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/mux-controller.txt
 create mode 100644 Documentation/devicetree/bindings/misc/mux-gpio.txt

diff --git a/Documentation/devicetree/bindings/misc/mux-controller.txt b/Documentation/devicetree/bindings/misc/mux-controller.txt
new file mode 100644
index 000000000000..19c36b73173e
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-controller.txt
@@ -0,0 +1,127 @@
+Common multiplexer controller bindings
+======================================
+
+A multiplexer (or mux) controller will have one, or several, consumer devices
+that uses the mux controller. Thus, a mux controller can possibly control
+several parallel multiplexers, presumably there will be at least one
+multiplexer needed by each consumer..
+
+A mux controller provides a number of states to its consumers, and the state
+space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+0-7 for an 8-way multiplexer, etc.
+
+
+Consumers
+---------
+
+Mux controller consumers should specify a list of mux controllers that they
+want to use with a property containing a 'mux-ctrl-list':
+
+	mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+	single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+	mux-ctrl-phandle : phandle to mux controller node
+	mux-ctrl-specifier : array of #mux-control-cells specifying the
+			     given mux controller (controller specific)
+
+Mux controller properties should be named "mux-controls". The exact meaning of
+each mux controller property must be documented in the device tree binding for
+each consumer. An optional property "mux-control-names" may contain a list of
+strings to label each of the mux controllers listed in the "mux-controls"
+property.
+
+Drivers for devices that use more than a single mux controller can use the
+"mux-control-names" property to map the name of the mux controller requested by
+the mux_control_get() call to an index into the list given by the
+"mux-controls" property.
+
+mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+If the mux controller chip only provides a single mux controller, the
+mux-ctrl-specifier can typically be left out.
+
+Example:
+
+	/* One consumer of a 2-way mux controller (one GPIO-line) */
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+		mux-control-names = "adc";
+
+		channels = "sync", "in";
+	};
+
+Note that in the example above, specifying the "mux-control-names" is redundant
+because there is only one mux controller in the list.
+
+	/*
+	 * Two consumers (one for an ADC line and one for an i2c bus) of
+	 * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+	 */
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels = "sync-1", "in", "out", "sync-2";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-simple,mux-locked";
+		i2c-parent = <&i2c1>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1307: oled@3c {
+				/* ... */
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				/* ... */
+			};
+		};
+	};
+
+
+Mux controller nodes
+--------------------
+
+Mux controller nodes must specify the number of cells used for the
+specifier using the '#mux-control-cells' property.
+
+An example mux controller might look like this:
+
+	mux: adg792a@50 {
+		compatible = "adi,adg792a";
+		reg = <0x50>;
+		#mux-control-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/misc/mux-gpio.txt b/Documentation/devicetree/bindings/misc/mux-gpio.txt
new file mode 100644
index 000000000000..2ff814f082c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-gpio.txt
@@ -0,0 +1,68 @@
+GPIO-based multiplexer controller bindings
+
+Define what GPIO pins are used to control a multiplexer. Or several
+multiplexers, if the same pins control more than one multiplexer.
+
+Required properties:
+- compatible : "mux-gpio"
+- mux-gpios : list of gpios used to control the multiplexer, least
+	      significant bit first.
+- #mux-control-cells : <0>
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- idle-state : if present, the state the mux will have when idle.
+
+The multiplexer state is defined as the number represented by the
+multiplexer GPIO pins, where the first pin is the least significant
+bit. An active pin is a binary 1, an inactive pin is a binary 0.
+
+Example:
+
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "iio-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "sync-1", "in", "out", "sync-2";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-simple,mux-locked";
+		i2c-parent = <&i2c1>;
+
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1307: oled@3c {
+				/* ... */
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				/* ... */
+			};
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index d8eb3843dbd4..3d4d0efc2b64 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8403,6 +8403,11 @@ S:	Orphan
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
+MULTIPLEXER SUBSYSTEM
+M:	Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/mux-*
+
 MULTISOUND SOUND DRIVER
 M:	Andrew Veliath <andrewtv-Jdbf3xiKgS8@public.gmane.org>
 S:	Maintained
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html