[PATCH v6 0/5] ARM: dts: da850: tilcdc related DT changes

[PATCH v6 0/5] ARM: dts: da850: tilcdc related DT changes

[Bartosz Golaszewski]

This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.

v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting

v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
  affects all da850-based boards

v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)

v4 -> v5:
- rename the display label to lcdc
- instead of using the 'dumb-vga-dac' compatible, add bindings for
  ti,ths8135 and use it as the vga-bridge node compatible

v5 -> v6:
- drop the endpoint numbers for nodes with single endpoints
- split patch 2/4 from v5 into two separate patches: one adding DT
  bindings and one adding actual support for ths8135

Bartosz Golaszewski (5):
  ARM: dts: da850: rename the display node label
  drm: bridge: add DT bindings for TI ths8135
  drm: bridge: add support for TI ths8135
  ARM: dts: da850-lcdk: add the vga-bridge node
  ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

 .../bindings/display/bridge/ti,ths8135.txt         | 52 +++++++++++++++++
 arch/arm/boot/dts/da850-lcdk.dts                   | 67 ++++++++++++++++++++++
 arch/arm/boot/dts/da850.dtsi                       |  3 +-
 drivers/gpu/drm/bridge/dumb-vga-dac.c              |  1 +
 4 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 1/5] ARM: dts: da850: rename the display node label

[Bartosz Golaszewski]

The tilcdc node name is 'display' as per the ePAPR 1.1 recommendation.
The label is also 'display', but change it to 'lcdc' to make it clear
what the underlying hardware is.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ffc6e1a..3f51e59 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -448,7 +448,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		display: display@213000 {
+		lcdc: display@213000 {
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 2/5] drm: bridge: add DT bindings for TI ths8135

[Bartosz Golaszewski]

THS8135 is a configurable video DAC. Add DT bindings for this chip.

Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
---
 .../bindings/display/bridge/ti,ths8135.txt         | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..87aff90
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,52 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+	compatible = "ti,ths8135";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			vga_bridge_in: endpoint {
+				reg = <0>;
+				remote-endpoint = <&lcdc_out_vga>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			vga_bridge_out: endpoint {
+				reg = <0>;
+				remote-endpoint = <&vga_con_in>;
+			};
+		};
+	};
+};
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 3/5] drm: bridge: add support for TI ths8135

[Bartosz Golaszewski]

THS8135 is a configurable video DAC, but no configuration is actually
necessary to make it work.

For now use the dumb-vga-dac driver to support it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232..498fa75 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
 
 static const struct of_device_id dumb_vga_match[] = {
 	{ .compatible = "dumb-vga-dac" },
+	{ .compatible = "ti,ths8135" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dumb_vga_match);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 4/5] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

Add the vga-bridge node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..e003111 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,51 @@
 			system-clock-frequency = <24576000>;
 		};
 	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					reg = <0>;
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					reg = <0>;
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -236,3 +281,25 @@
 &memctrl {
 	status = "okay";
 };
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcdc_out: port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			lcdc_out_vga: endpoint {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+			};
+		};
+	};
+};
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 4/5] ARM: dts: da850-lcdk: add the vga-bridge node

[Tomi Valkeinen]

[-- Attachment #1.1.1: Type: text/plain, Size: 877 bytes --]

Hi,

On 12/12/16 15:05, Bartosz Golaszewski wrote:

> +&lcdc {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&lcd_pins>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		lcdc_out: port@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			lcdc_out_vga: endpoint {
> +				reg = <0>;
> +				remote-endpoint = <&vga_bridge_in>;
> +			};
> +		};
> +	};
> +};
> 

This is not correct. LCDC has just one output, so port@1 doesn't make
sense. It's port@0. But with just one port, you can leave "ports" away.
And you don't need the port's label for anything, if I'm not mistaken. So:

&lcdc {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&lcd_pins>;

	port {
		lcdc_out_vga: endpoint {
			remote-endpoint = <&vga_bridge_in>;
		};
	};
};

 Tomi


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 4/5] ARM: dts: da850-lcdk: add the vga-bridge node

[Bartosz Golaszewski]

2016-12-13 9:46 GMT+01:00 Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>:
> Hi,
>
> On 12/12/16 15:05, Bartosz Golaszewski wrote:
>
>> +&lcdc {
>> +     status = "okay";
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&lcd_pins>;
>> +
>> +     ports {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             lcdc_out: port@1 {
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     reg = <1>;
>> +
>> +                     lcdc_out_vga: endpoint {
>> +                             reg = <0>;
>> +                             remote-endpoint = <&vga_bridge_in>;
>> +                     };
>> +             };
>> +     };
>> +};
>>
>
> This is not correct. LCDC has just one output, so port@1 doesn't make
> sense. It's port@0. But with just one port, you can leave "ports" away.
> And you don't need the port's label for anything, if I'm not mistaken. So:
>
> &lcdc {
>         status = "okay";
>         pinctrl-names = "default";
>         pinctrl-0 = <&lcd_pins>;
>
>         port {
>                 lcdc_out_vga: endpoint {
>                         remote-endpoint = <&vga_bridge_in>;
>                 };
>         };
> };
>
>  Tomi
>

Right, fixed in v7.

Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 5/5] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

[Bartosz Golaszewski]

At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.

Specify the max-pixelclock property for the display node for
da850-lcdk.

[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3f51e59..ba5bf80 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -452,6 +452,7 @@
 			compatible = "ti,da850-tilcdc";
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
+			max-pixelclock = <37500>;
 			status = "disabled";
 		};
 	};
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel