From: Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Subject: [PATCH] bus: imx-weim: Place 'fsl,weim-cs-timing' under the required properties section
Date: Fri, 30 Dec 2016 08:46:12 -0200 [thread overview]
Message-ID: <1483094772-14904-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Property 'fsl,weim-cs-timing' is a required one, so place it under
"Required properties" section.
Signed-off-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
---
Documentation/devicetree/bindings/bus/imx-weim.txt | 27 ++++++++++------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 6630d84..a9a125b 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -23,6 +23,18 @@ Required properties:
integer values for each chip-select line in use:
<cs-number> 0 <physical address of mapping> <size>
+ - fsl,weim-cs-timing: The timing array, contains timing values for the
+ child node. We can get the CS index from the child
+ node's "reg" property. The number of registers depends
+ on the selected chip.
+ For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
+ registers: CSxU, CSxL.
+ For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
+ there are three registers: CSCRxU, CSCRxL, CSCRxA.
+ For i.MX50, i.MX53 ("fsl,imx50-weim"),
+ i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
+ there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
+ CSxRCR2, CSxWCR1, CSxWCR2.
Optional properties:
@@ -44,21 +56,6 @@ Optional properties:
what bootloader sets up in IOMUXC_GPR1[11:0] will be
used.
-Timing property for child nodes. It is mandatory, not optional.
-
- - fsl,weim-cs-timing: The timing array, contains timing values for the
- child node. We can get the CS index from the child
- node's "reg" property. The number of registers depends
- on the selected chip.
- For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
- registers: CSxU, CSxL.
- For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
- there are three registers: CSCRxU, CSCRxL, CSCRxA.
- For i.MX50, i.MX53 ("fsl,imx50-weim"),
- i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
- there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
- CSxRCR2, CSxWCR1, CSxWCR2.
-
Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
weim: weim@021b8000 {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-12-30 10:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-30 10:46 Fabio Estevam [this message]
[not found] ` <1483094772-14904-1-git-send-email-festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-03 3:10 ` [PATCH] bus: imx-weim: Place 'fsl,weim-cs-timing' under the required properties section Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483094772-14904-1-git-send-email-festevam@gmail.com \
--to=festevam-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).