From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Gaignard Subject: [PATCH v7 3/8] PWM: add pwm-stm32 DT bindings Date: Thu, 5 Jan 2017 10:25:39 +0100 Message-ID: <1483608344-9012-4-git-send-email-benjamin.gaignard@st.com> References: <1483608344-9012-1-git-send-email-benjamin.gaignard@st.com> Return-path: In-Reply-To: <1483608344-9012-1-git-send-email-benjamin.gaignard-qxv4g6HH51o@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, alexandre.torgue-qxv4g6HH51o@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, knaack.h-Mmb7MZpHnFY@public.gmane.org, lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org, pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: fabrice.gasnier-qxv4g6HH51o@public.gmane.org, gerald.baeza-qxv4g6HH51o@public.gmane.org, arnaud.pouliquen-qxv4g6HH51o@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Benjamin Gaignard List-Id: devicetree@vger.kernel.org Define bindings for pwm-stm32 version 6: - change st,breakinput parameter format to make it usuable on stm32f7 too. version 2: - use parameters instead of compatible of handle the hardware configuration Signed-off-by: Benjamin Gaignard --- .../devicetree/bindings/pwm/pwm-stm32.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt new file mode 100644 index 0000000..866f222 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -0,0 +1,33 @@ +STMicroelectronics STM32 Timers PWM bindings + +Must be a sub-node of an STM32 Timers device tree node. +See ../mfd/stm32-timers.txt for details about the parent node. + +Required parameters: +- compatible: Must be "st,stm32-pwm". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. + For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt + +Optional parameters: +- st,breakinput: Arrays of three u32 to describe break input configurations. + "index" indicates on which break input the configuration should be applied. + "level" gives the active level (0=low or 1=high) for this configuration. + "filter" gives the filtering value to be applied. + +Example: + timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + pwm { + compatible = "st,stm32-pwm"; + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + st,breakinput = <0 1 5>; + }; + }; -- 1.9.1