devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baoyou Xie <baoyou.xie@linaro.org>
To: jun.nie@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	gregkh@linuxfoundation.org, davem@davemloft.net,
	geert+renesas@glider.be, akpm@linux-foundation.org,
	mchehab@kernel.org, krzk@kernel.org, arnd@arndb.de,
	claudiu.manoil@nxp.com, amitdanielk@gmail.com,
	pankaj.dubey@samsung.com, yangbo.lu@nxp.com,
	scott.branden@broadcom.com, simon.horman@netronome.com
Cc: devicetree@vger.kernel.org, Baoyou Xie <baoyou.xie@linaro.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 4/5] soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family
Date: Fri,  6 Jan 2017 17:16:03 +0800	[thread overview]
Message-ID: <1483694164-7668-4-git-send-email-baoyou.xie@linaro.org> (raw)
In-Reply-To: <1483694164-7668-1-git-send-email-baoyou.xie@linaro.org>

The ARMv8 zx2967 family (296718, 296716 etc) uses different value
for controlling the power domain on/off registers, Choose the
value depending on the compatible.

Multiple domains are prepared for the family, this patch prepares
the common functions.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
 drivers/soc/Kconfig                 |   1 +
 drivers/soc/Makefile                |   1 +
 drivers/soc/zte/Kconfig             |  13 ++++
 drivers/soc/zte/Makefile            |   4 +
 drivers/soc/zte/zx2967_pm_domains.c | 143 ++++++++++++++++++++++++++++++++++++
 drivers/soc/zte/zx2967_pm_domains.h |  44 +++++++++++
 6 files changed, 206 insertions(+)
 create mode 100644 drivers/soc/zte/Kconfig
 create mode 100644 drivers/soc/zte/Makefile
 create mode 100644 drivers/soc/zte/zx2967_pm_domains.c
 create mode 100644 drivers/soc/zte/zx2967_pm_domains.h

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index f31bceb..f09023f 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
+source "drivers/soc/zte/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 50c23d0..05eae52 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_SOC_TI)		+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
+obj-$(CONFIG_ARCH_ZX)		+= zte/
diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig
new file mode 100644
index 0000000..20bde38
--- /dev/null
+++ b/drivers/soc/zte/Kconfig
@@ -0,0 +1,13 @@
+#
+# ZTE SoC drivers
+#
+menuconfig SOC_ZTE
+	bool "ZTE SoC driver support"
+
+if SOC_ZTE
+
+config ZX2967_PM_DOMAINS
+	bool "ZX2967 PM domains"
+	depends on PM_GENERIC_DOMAINS
+
+endif
diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile
new file mode 100644
index 0000000..8a37f2f
--- /dev/null
+++ b/drivers/soc/zte/Makefile
@@ -0,0 +1,4 @@
+#
+# ZTE SOC drivers
+#
+obj-$(CONFIG_ZX2967_PM_DOMAINS) += zx2967_pm_domains.o
diff --git a/drivers/soc/zte/zx2967_pm_domains.c b/drivers/soc/zte/zx2967_pm_domains.c
new file mode 100644
index 0000000..61c8d84
--- /dev/null
+++ b/drivers/soc/zte/zx2967_pm_domains.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 ZTE Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "zx2967_pm_domains.h"
+
+#define PCU_DM_CLKEN(zpd)	((zpd)->reg_offset[REG_CLKEN])
+#define PCU_DM_ISOEN(zpd)	((zpd)->reg_offset[REG_ISOEN])
+#define PCU_DM_RSTEN(zpd)	((zpd)->reg_offset[REG_RSTEN])
+#define PCU_DM_PWREN(zpd)	((zpd)->reg_offset[REG_PWREN])
+#define PCU_DM_ACK_SYNC(zpd)	((zpd)->reg_offset[REG_ACK_SYNC])
+
+static void __iomem *pcubase;
+
+static int zx2967_power_on(struct generic_pm_domain *domain)
+{
+	struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain;
+	unsigned long loop = 1000;
+	u32 val;
+
+	val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
+	if (zpd->polarity == PWREN)
+		val |= BIT(zpd->bit);
+	else
+		val &= ~BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
+
+	do {
+		udelay(1);
+		val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
+				   & BIT(zpd->bit);
+	} while (--loop && !val);
+
+	if (!loop) {
+		pr_err("Error: %s %s fail\n", __func__, domain->name);
+		return -EIO;
+	}
+
+	val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
+	val |= BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
+	udelay(5);
+
+	val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
+	val &= ~BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd));
+	udelay(5);
+
+	val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
+	val |= BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd));
+	udelay(5);
+
+	pr_debug("poweron %s\n", domain->name);
+
+	return 0;
+}
+
+static int zx2967_power_off(struct generic_pm_domain *domain)
+{
+	struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain;
+	unsigned long loop = 1000;
+	u32 val;
+
+	val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
+	val &= ~BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd));
+	udelay(5);
+
+	val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
+	val |= BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd));
+	udelay(5);
+
+	val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
+	val &= ~BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
+	udelay(5);
+
+	val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
+	if (zpd->polarity == PWREN)
+		val &= ~BIT(zpd->bit);
+	else
+		val |= BIT(zpd->bit);
+	writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
+
+	do {
+		udelay(1);
+		val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
+				   & BIT(zpd->bit);
+	} while (--loop && val);
+
+	if (!loop) {
+		pr_err("Error: %s %s fail\n", __func__, domain->name);
+		return -EIO;
+	}
+
+	pr_debug("poweroff %s\n", domain->name);
+
+	return 0;
+}
+
+int zx2967_pd_probe(struct platform_device *pdev,
+		    struct generic_pm_domain **zx_pm_domains,
+		    int domain_num)
+{
+	struct genpd_onecell_data *genpd_data;
+	struct resource *res;
+	int i;
+
+	genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL);
+	if (!genpd_data)
+		return -ENOMEM;
+
+	genpd_data->domains = zx_pm_domains;
+	genpd_data->num_domains = domain_num;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pcubase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pcubase)) {
+		dev_err(&pdev->dev, "ioremap fail.\n");
+		return PTR_ERR(pcubase);
+	}
+
+	for (i = 0; i < domain_num; ++i) {
+		zx_pm_domains[i]->power_on = zx2967_power_on;
+		zx_pm_domains[i]->power_off = zx2967_power_off;
+
+		pm_genpd_init(zx_pm_domains[i], NULL, false);
+	}
+
+	of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data);
+	dev_info(&pdev->dev, "powerdomain init ok\n");
+	return 0;
+}
diff --git a/drivers/soc/zte/zx2967_pm_domains.h b/drivers/soc/zte/zx2967_pm_domains.h
new file mode 100644
index 0000000..cb46595
--- /dev/null
+++ b/drivers/soc/zte/zx2967_pm_domains.h
@@ -0,0 +1,44 @@
+/*
+ * Header for ZTE's Power Domain Driver support
+ *
+ * Copyright (C) 2017 ZTE Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __ZTE_ZX2967_PM_DOMAIN_H
+#define __ZTE_ZX2967_PM_DOMAIN_H
+
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+
+enum {
+	REG_CLKEN,
+	REG_ISOEN,
+	REG_RSTEN,
+	REG_PWREN,
+	REG_PWRDN,
+	REG_ACK_SYNC,
+
+	/* The size of the array - must be last */
+	REG_ARRAY_SIZE,
+};
+
+enum zx2967_power_polarity {
+	PWREN,
+	PWRDN,
+};
+
+struct zx2967_pm_domain {
+	struct generic_pm_domain dm;
+	const u16 bit;
+	const enum zx2967_power_polarity polarity;
+	const u16 *reg_offset;
+};
+
+int zx2967_pd_probe(struct platform_device *pdev,
+		    struct generic_pm_domain **zx_pm_domains,
+		    int domain_num);
+
+#endif /* __ZTE_ZX2967_PM_DOMAIN_H */
-- 
2.7.4

  parent reply	other threads:[~2017-01-06  9:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-06  9:16 [PATCH v7 1/5] dt-bindings: zte: add bindings document for zx2967 power domain controller Baoyou Xie
2017-01-06  9:16 ` [PATCH v7 2/5] MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture Baoyou Xie
2017-01-06  9:19   ` Baoyou Xie
2017-01-06  9:16 ` [PATCH v7 3/5] soc: zte: Add header for PM domains specifiers Baoyou Xie
2017-01-06  9:19   ` Baoyou Xie
2017-01-06  9:16 ` Baoyou Xie [this message]
2017-01-06  9:20   ` [PATCH v7 4/5] soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family Baoyou Xie
2017-01-06  9:16 ` [PATCH v7 5/5] soc: zte: pm_domains: Add support for zx296718 Baoyou Xie
2017-01-06  9:20   ` Baoyou Xie
2017-01-09  2:16   ` Shawn Guo
2017-01-06  9:19 ` [PATCH v7 1/5] dt-bindings: zte: add bindings document for zx2967 power domain controller Baoyou Xie
     [not found] ` <1483694164-7668-1-git-send-email-baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-09  2:09   ` Shawn Guo
2017-01-10  5:35   ` Rob Herring
2017-01-11  8:23   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483694164-7668-4-git-send-email-baoyou.xie@linaro.org \
    --to=baoyou.xie@linaro.org \
    --cc=akpm@linux-foundation.org \
    --cc=amitdanielk@gmail.com \
    --cc=arnd@arndb.de \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.nie@linaro.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=pankaj.dubey@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=scott.branden@broadcom.com \
    --cc=simon.horman@netronome.com \
    --cc=yangbo.lu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).