From: <gabriel.fernandez@st.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Nicolas Pitre <nico@linaro.org>, Arnd Bergmann <arnd@arndb.de>,
daniel.thompson@linaro.org, andrea.merello@gmail.com,
radoslaw.pietrzyk@gmail.com
Cc: devicetree@vger.kernel.org, amelie.delaunay@st.com,
olivier.bideau@st.com, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
gabriel.fernandez@st.com, ludovic.barre@st.com
Subject: [PATCH v2 3/3] ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
Date: Mon, 9 Jan 2017 10:07:13 +0100 [thread overview]
Message-ID: <1483952833-14704-4-git-send-email-gabriel.fernandez@st.com> (raw)
In-Reply-To: <1483952833-14704-1-git-send-email-gabriel.fernandez@st.com>
From: Gabriel Fernandez <gabriel.fernandez@st.com>
This patch uses clock DT binding definition instead numerical values
for stm32f429 board.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
arch/arm/boot/dts/stm32429i-eval.dts | 2 +-
arch/arm/boot/dts/stm32f429.dtsi | 66 +++++++++++++++++++-----------------
2 files changed, 36 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 76f7206..4e31881 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -107,7 +107,7 @@
usbotg_hs_phy: usbphy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
- clocks = <&rcc 0 30>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
clock-names = "main_clk";
};
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 041e3fc..1bacdfb 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -49,6 +49,7 @@
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
clocks {
@@ -82,7 +83,7 @@
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
- clocks = <&rcc 0 128>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
status = "disabled";
};
@@ -90,7 +91,7 @@
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
- clocks = <&rcc 0 129>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
status = "disabled";
};
@@ -98,7 +99,7 @@
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
- clocks = <&rcc 0 130>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
status = "disabled";
};
@@ -106,14 +107,14 @@
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&rcc 0 131>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
};
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
- clocks = <&rcc 0 132>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
status = "disabled";
};
@@ -121,7 +122,7 @@
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
- clocks = <&rcc 0 133>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
status = "disabled";
};
@@ -129,7 +130,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
- clocks = <&rcc 0 145>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
status = "disabled";
};
@@ -137,7 +138,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
- clocks = <&rcc 0 146>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
status = "disabled";
dmas = <&dma1 1 4 0x400 0x0>,
<&dma1 3 4 0x400 0x0>;
@@ -148,7 +149,7 @@
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
- clocks = <&rcc 0 147>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
status = "disabled";
};
@@ -156,7 +157,7 @@
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
- clocks = <&rcc 0 148>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
status = "disabled";
};
@@ -164,7 +165,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
- clocks = <&rcc 0 158>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
status = "disabled";
};
@@ -172,7 +173,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
- clocks = <&rcc 0 159>;
+ clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
status = "disabled";
};
@@ -180,7 +181,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&rcc 0 164>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
status = "disabled";
dmas = <&dma2 2 4 0x400 0x0>,
<&dma2 7 4 0x400 0x0>;
@@ -191,7 +192,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
- clocks = <&rcc 0 165>;
+ clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
status = "disabled";
};
@@ -226,7 +227,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
- clocks = <&rcc 0 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
@@ -234,7 +235,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
- clocks = <&rcc 0 1>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
@@ -242,7 +243,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
- clocks = <&rcc 0 2>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
@@ -250,7 +251,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
- clocks = <&rcc 0 3>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
@@ -258,7 +259,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
- clocks = <&rcc 0 4>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
@@ -266,7 +267,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
- clocks = <&rcc 0 5>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
@@ -274,7 +275,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
- clocks = <&rcc 0 6>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
@@ -282,7 +283,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
- clocks = <&rcc 0 7>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
@@ -290,7 +291,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
- clocks = <&rcc 0 8>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
@@ -298,7 +299,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
- clocks = <&rcc 0 9>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
@@ -306,7 +307,7 @@
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
- clocks = <&rcc 0 10>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
@@ -384,7 +385,7 @@
<16>,
<17>,
<47>;
- clocks = <&rcc 0 21>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
#dma-cells = <4>;
};
@@ -399,7 +400,7 @@
<68>,
<69>,
<70>;
- clocks = <&rcc 0 22>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
#dma-cells = <4>;
st,mem2mem;
};
@@ -411,7 +412,9 @@
interrupts = <61>;
interrupt-names = "macirq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
+ <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
snps,mixed-burst;
@@ -422,7 +425,7 @@
compatible = "snps,dwc2";
reg = <0x40040000 0x40000>;
interrupts = <77>;
- clocks = <&rcc 0 29>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
clock-names = "otg";
status = "disabled";
};
@@ -431,12 +434,13 @@
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
interrupts = <80>;
- clocks = <&rcc 0 38>;
+ clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
+
};
};
};
&systick {
- clocks = <&rcc 1 0>;
+ clocks = <&rcc 1 SYSTICK>;
status = "okay";
};
--
1.9.1
prev parent reply other threads:[~2017-01-09 9:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-09 9:07 [PATCH v2 0/3] STM32F4 Clock binding fix & update gabriel.fernandez
2017-01-09 9:07 ` [PATCH v2 1/3] dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro gabriel.fernandez
2017-01-21 0:34 ` Stephen Boyd
2017-01-09 9:07 ` [PATCH v2 2/3] dt-bindings: mfd: stm32f4: Add missing binding definition gabriel.fernandez
2017-01-09 9:07 ` gabriel.fernandez [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483952833-14704-4-git-send-email-gabriel.fernandez@st.com \
--to=gabriel.fernandez@st.com \
--cc=alexandre.torgue@st.com \
--cc=amelie.delaunay@st.com \
--cc=andrea.merello@gmail.com \
--cc=arnd@arndb.de \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.barre@st.com \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=nico@linaro.org \
--cc=olivier.bideau@st.com \
--cc=radoslaw.pietrzyk@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).