* [V2 2/2] Add initial dtsi file to support Hisilicon Hi3660 SoC with support of Octal core CPUs in two clusters(4 * A53 & 4 * A73).
[not found] ` <1484034548-47794-1-git-send-email-puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
@ 2017-01-10 7:49 ` Chen Feng
0 siblings, 0 replies; 2+ messages in thread
From: Chen Feng @ 2017-01-10 7:49 UTC (permalink / raw)
To: puck.chen-C8/M+/jPZTeaMJb+Lgu22Q, xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: puck.chen-H32Fclmsjq1BDgjK7y7TUQ, dan.zhao-C8/M+/jPZTeaMJb+Lgu22Q,
suzhuangluan-C8/M+/jPZTeaMJb+Lgu22Q,
saberlily.xia-C8/M+/jPZTeaMJb+Lgu22Q,
xuyiping-C8/M+/jPZTeaMJb+Lgu22Q, qijiwen-C8/M+/jPZTeaMJb+Lgu22Q
Also add dts file to support HiKey960 development board which
based on Hi3660 SoC.
The output console is earlycon "earlycon=pl011,0xfdf05000".
And the con_init uart5 with a fixed clock, which already
configured at bootloader.
When clock is available, the uart5 will be modified.
Tested on HiKey960 Board.
Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
---
arch/arm64/boot/dts/hisilicon/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 34 +++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 156 ++++++++++++++++++++++
3 files changed, 191 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index c8b8f80..7aee1f3 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
new file mode 100644
index 0000000..bc5399d
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -0,0 +1,34 @@
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+
+/ {
+ model = "HiKey960";
+ compatible = "hisilicon,hi3660";
+
+ aliases {
+ serial5 = &uart5; /* console UART */
+ };
+
+ chosen {
+ stdout-path = "serial5:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x00400000 0x0 0xbfe00000>;
+ };
+
+ soc {
+ uart5: uart@fdf05000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
new file mode 100644
index 0000000..7f9805c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -0,0 +1,156 @@
+/*
+ * dts file for Hisilicon Hi3660 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi3660";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@e82b0000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+ <0x0 0xe82b2000 0 0x2000>, /* GICC */
+ <0x0 0xe82b4000 0 0x2000>, /* GICH */
+ <0x0 0xe82b6000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <1920000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ fixed_uart5: fixed_19_2M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "fixed:uart5";
+ };
+
+ uart5: uart@fdf05000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf05000 0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&fixed_uart5 &fixed_uart5>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "ok";
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread