* arm64: dts: mt8173: add node for thermal calibration
@ 2017-01-13 5:52 Dawei Chien
2017-01-13 8:51 ` Daniel Kurtz
0 siblings, 1 reply; 3+ messages in thread
From: Dawei Chien @ 2017-01-13 5:52 UTC (permalink / raw)
To: Rob Herring, Matthias Brugger
Cc: Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, Punit Agrawal,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Pawel Moll, Ian Campbell,
linux-pm-u79uwXL29TY76Z2rM5mHXA, Dawei Chien,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Sascha Hauer,
Kumar Gala, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: "dawei.chien-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org" <dawei.chien-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add this for supporting thermal calibration by e-fuse data.
Signed-off-by: Dawei Chien <dawei.chien-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 12e7027..adfac1e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -401,6 +401,11 @@
efuse: efuse@10206000 {
compatible = "mediatek,mt8173-efuse";
reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ thermal_calibration: calib@528 {
+ reg = <0x528 0xc>;
+ };
};
apmixedsys: clock-controller@10209000 {
@@ -574,6 +579,8 @@
resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
mediatek,auxadc = <&auxadc>;
mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
};
nor_flash: spi@1100d000 {
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: arm64: dts: mt8173: add node for thermal calibration
2017-01-13 5:52 arm64: dts: mt8173: add node for thermal calibration Dawei Chien
@ 2017-01-13 8:51 ` Daniel Kurtz
2017-01-23 9:20 ` Matthias Brugger
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Kurtz @ 2017-01-13 8:51 UTC (permalink / raw)
To: Dawei Chien
Cc: Rob Herring, Matthias Brugger, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, open list:OPEN FIRMWARE AND...,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm,
moderated list:ARM/Mediatek SoC support, srv_heupstream,
Sascha Hauer, Punit Agrawal
On Fri, Jan 13, 2017 at 1:52 PM, Dawei Chien <dawei.chien@mediatek.com> wrote:
>
> From: "dawei.chien@mediatek.com" <dawei.chien@mediatek.com>
>
> Add this for supporting thermal calibration by e-fuse data.
>
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 12e7027..adfac1e 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -401,6 +401,11 @@
> efuse: efuse@10206000 {
> compatible = "mediatek,mt8173-efuse";
> reg = <0 0x10206000 0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + thermal_calibration: calib@528 {
> + reg = <0x528 0xc>;
> + };
> };
>
> apmixedsys: clock-controller@10209000 {
> @@ -574,6 +579,8 @@
> resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> mediatek,auxadc = <&auxadc>;
> mediatek,apmixedsys = <&apmixedsys>;
> + nvmem-cells = <&thermal_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> nor_flash: spi@1100d000 {
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: arm64: dts: mt8173: add node for thermal calibration
2017-01-13 8:51 ` Daniel Kurtz
@ 2017-01-23 9:20 ` Matthias Brugger
0 siblings, 0 replies; 3+ messages in thread
From: Matthias Brugger @ 2017-01-23 9:20 UTC (permalink / raw)
To: Daniel Kurtz, Dawei Chien
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
open list:OPEN FIRMWARE AND...,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm,
moderated list:ARM/Mediatek SoC support, srv_heupstream,
Sascha Hauer, Punit Agrawal
On 01/13/2017 09:51 AM, Daniel Kurtz wrote:
> On Fri, Jan 13, 2017 at 1:52 PM, Dawei Chien <dawei.chien@mediatek.com> wrote:
>>
>> From: "dawei.chien@mediatek.com" <dawei.chien@mediatek.com>
>>
>> Add this for supporting thermal calibration by e-fuse data.
>>
>> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
>
applied, thanks
>> ---
>> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> index 12e7027..adfac1e 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> @@ -401,6 +401,11 @@
>> efuse: efuse@10206000 {
>> compatible = "mediatek,mt8173-efuse";
>> reg = <0 0x10206000 0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + thermal_calibration: calib@528 {
>> + reg = <0x528 0xc>;
>> + };
>> };
>>
>> apmixedsys: clock-controller@10209000 {
>> @@ -574,6 +579,8 @@
>> resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
>> mediatek,auxadc = <&auxadc>;
>> mediatek,apmixedsys = <&apmixedsys>;
>> + nvmem-cells = <&thermal_calibration>;
>> + nvmem-cell-names = "calibration-data";
>> };
>>
>> nor_flash: spi@1100d000 {
>> --
>> 1.9.1
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-01-23 9:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-13 5:52 arm64: dts: mt8173: add node for thermal calibration Dawei Chien
2017-01-13 8:51 ` Daniel Kurtz
2017-01-23 9:20 ` Matthias Brugger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).