From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Kevin Hilman <khilman@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
Patrick Titiano <ptitiano@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
Tejun Heo <tj@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
David Lechner <david@lechnology.com>
Cc: linux-ide@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH 00/10] ARM: da850-lcdk: add SATA support
Date: Fri, 13 Jan 2017 13:37:54 +0100 [thread overview]
Message-ID: <1484311084-31547-1-git-send-email-bgolaszewski@baylibre.com> (raw)
This series contains all the changes necessary to make SATA work on
the da850-lcdk board.
The first patch adds a clock lookup entry required for the ahci core
to retrieve a functional clock.
The second enables relevant config options for all davinci boards.
The third adds device tree bindings for the ahci_da850 driver.
The fourth adds a workaround for a SATA controller instability we
detected after increasing the PLL0 frequency for proper LCD
controller support.
Patches 5 through 7 extend the ahci_da850 driver - add DT support,
un-hardcode the clock multiplier value and add a workaround for
a quirk present on the da850 SATA controller.
Patches 8-10 add the device tree changes required to probe the driver.
I'm posting the series as a whole to give all reviewers the full
picture and visibility of the changes required, if needed I can resend
the patches separately.
Bartosz Golaszewski (10):
ARM: davinci: add a clock lookup entry for the SATA clock
ARM: davinci_all_defconfig: enable SATA modules
devicetree: bindings: add bindings for ahci-da850
sata: hardreset: retry if phys link is down
sata: ahci_da850: add device tree match table
sata: ahci_da850: implement a softreset quirk
sata: ahci_da850: add support for the da850,clk_multiplier DT property
ARM: dts: da850: add pinmux settings for the SATA controller
ARM: dts: da850: add the SATA node
ARM: dts: da850-lcdk: enable the SATA node
.../devicetree/bindings/ata/ahci-da850.txt | 21 ++++
arch/arm/boot/dts/da850-lcdk.dts | 5 +
arch/arm/boot/dts/da850.dtsi | 30 ++++++
arch/arm/configs/davinci_all_defconfig | 2 +
arch/arm/mach-davinci/da8xx-dt.c | 1 +
drivers/ata/ahci_da850.c | 112 +++++++++++++++++++--
drivers/ata/libata-core.c | 16 ++-
include/linux/libata.h | 4 +-
8 files changed, 177 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt
--
2.9.3
next reply other threads:[~2017-01-13 12:37 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-13 12:37 Bartosz Golaszewski [this message]
2017-01-13 12:37 ` [PATCH 01/10] ARM: davinci: add a clock lookup entry for the SATA clock Bartosz Golaszewski
2017-01-13 12:37 ` [PATCH 02/10] ARM: davinci_all_defconfig: enable SATA modules Bartosz Golaszewski
2017-01-13 12:37 ` [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850 Bartosz Golaszewski
[not found] ` <1484311084-31547-4-git-send-email-bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-13 19:25 ` David Lechner
2017-01-16 10:13 ` Bartosz Golaszewski
2017-01-16 12:45 ` Sekhar Nori
[not found] ` <d8406f53-b97d-ca9a-f7d1-94ce5b7064f7-l0cyMroinI0@public.gmane.org>
2017-01-16 14:30 ` Bartosz Golaszewski
2017-01-16 18:47 ` David Lechner
[not found] ` <fb93275e-73ad-513b-6ac8-a39bbe43fd5c-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2017-01-17 12:00 ` Sekhar Nori
2017-01-17 18:31 ` davinci common clock framework (was Re: [PATCH 03/10] devicetree: bindings: add bindings for ahci-da850) David Lechner
2017-01-13 12:37 ` [PATCH 04/10] sata: hardreset: retry if phys link is down Bartosz Golaszewski
2017-01-15 23:10 ` Tejun Heo
2017-01-16 12:28 ` Bartosz Golaszewski
2017-01-13 12:37 ` [PATCH 05/10] sata: ahci_da850: add device tree match table Bartosz Golaszewski
2017-01-13 12:38 ` [PATCH 06/10] sata: ahci_da850: implement a softreset quirk Bartosz Golaszewski
[not found] ` <1484311084-31547-7-git-send-email-bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-15 23:12 ` Tejun Heo
2017-01-16 10:17 ` Bartosz Golaszewski
2017-01-13 12:38 ` [PATCH 07/10] sata: ahci_da850: add support for the da850, clk_multiplier DT property Bartosz Golaszewski
2017-01-13 19:29 ` [PATCH 07/10] sata: ahci_da850: add support for the da850,clk_multiplier " David Lechner
2017-01-13 12:38 ` [PATCH 08/10] ARM: dts: da850: add pinmux settings for the SATA controller Bartosz Golaszewski
2017-01-13 12:38 ` [PATCH 09/10] ARM: dts: da850: add the SATA node Bartosz Golaszewski
2017-01-13 19:36 ` David Lechner
[not found] ` <4eb4ada8-1d2d-2fa1-7961-21da56ea0082-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2017-01-16 10:03 ` Bartosz Golaszewski
[not found] ` <1484311084-31547-1-git-send-email-bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-13 12:38 ` [PATCH 10/10] ARM: dts: da850-lcdk: enable " Bartosz Golaszewski
2017-01-17 12:34 ` [PATCH 00/10] ARM: da850-lcdk: add SATA support Bartosz Golaszewski
2017-01-13 14:32 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484311084-31547-1-git-send-email-bgolaszewski@baylibre.com \
--to=bgolaszewski@baylibre.com \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=ptitiano@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).