From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Subject: [PATCH 10/10] ARM: dts: da850-lcdk: enable the SATA node Date: Fri, 13 Jan 2017 13:38:04 +0100 Message-ID: <1484311084-31547-11-git-send-email-bgolaszewski@baylibre.com> References: <1484311084-31547-1-git-send-email-bgolaszewski@baylibre.com> Return-path: In-Reply-To: <1484311084-31547-1-git-send-email-bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Kevin Hilman , Sekhar Nori , Patrick Titiano , Michael Turquette , Tejun Heo , Rob Herring , Mark Rutland , Russell King , David Lechner Cc: linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Bartosz Golaszewski List-Id: devicetree@vger.kernel.org Enable the SATA node for da850-lcdk. We omit the pinctrl property on purpose - the muxed SATA pins are not hooked up to anything SATA-related on the lcdk. The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of 15 for 1.5GHz PLL rate. Signed-off-by: Bartosz Golaszewski --- arch/arm/boot/dts/da850-lcdk.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..1e638da 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -105,6 +105,11 @@ status = "okay"; }; +&sata { + status = "okay"; + da850,clk_multiplier = <15>; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html