From: Murali Karicheri <m-karicheri2@ti.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, f.fainelli@gmail.com,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, nsekhar@ti.com
Subject: [PATCH] net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
Date: Fri, 13 Jan 2017 09:32:34 -0500 [thread overview]
Message-ID: <1484317954-27871-1-git-send-email-m-karicheri2@ti.com> (raw)
Currently dp83867 driver returns error if phy interface type
PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal
delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID.
Fix this by checking also the interface type if a particular delay
value is missing in the phy dt bindings. Also update the DT document
accordingly.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
- I had sent this earlier and some how it didn't get through and
I haven't seen any comment for this. So sending this again.
- Applies to master.
Documentation/devicetree/bindings/net/ti,dp83867.txt | 6 ++++--
drivers/net/phy/dp83867.c | 8 ++++++--
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 85bf945..afe9630 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -3,9 +3,11 @@
Required properties:
- reg - The ID number for the phy, usually a small integer
- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
+ for applicable values. Required only if interface type is
+ PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
for applicable values
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index e84ae08..ca1b462 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -132,12 +132,16 @@ static int dp83867_of_init(struct phy_device *phydev)
ret = of_property_read_u32(of_node, "ti,rx-internal-delay",
&dp83867->rx_id_delay);
- if (ret)
+ if (ret &&
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
return ret;
ret = of_property_read_u32(of_node, "ti,tx-internal-delay",
&dp83867->tx_id_delay);
- if (ret)
+ if (ret &&
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID))
return ret;
return of_property_read_u32(of_node, "ti,fifo-depth",
--
1.9.1
next reply other threads:[~2017-01-13 14:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-13 14:32 Murali Karicheri [this message]
[not found] ` <1484317954-27871-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2017-01-16 18:30 ` [PATCH] net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484317954-27871-1-git-send-email-m-karicheri2@ti.com \
--to=m-karicheri2@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).