From: Chris Zhong <zyw@rock-chips.com>
To: dianders@chromium.org, tfiga@chromium.org, heiko@sntech.de,
yzq@rock-chips.com, mark.rutland@arm.com,
devicetree@vger.kernel.org, robh+dt@kernel.org,
galak@codeaurora.org, pawel.moll@arm.com, seanpaul@chromium.org
Cc: linux-rockchip@lists.infradead.org, xubilv <xbl@rock-chips.com>,
Chris Zhong <zyw@rock-chips.com>,
Mark Yao <mark.yao@rock-chips.com>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 08/11] drm/rockchip/dsi: fix the issue can not send commands
Date: Mon, 16 Jan 2017 18:08:28 +0800 [thread overview]
Message-ID: <1484561311-494-9-git-send-email-zyw@rock-chips.com> (raw)
In-Reply-To: <1484561311-494-1-git-send-email-zyw@rock-chips.com>
From: xubilv <xbl@rock-chips.com>
There is a bug in hdr_write function, the value from the caller will be
overwritten, it cause the mipi can not send the correct command. And the
MIPI_DSI_GENERIC_SHORT_WRITE_n_PARAM message type should be supported.
Signed-off-by: xubilv <xbl@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 4ec82f6..4a2691c 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -572,10 +572,12 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
{
int ret;
+ u32 sts;
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
- val, !(val & GEN_CMD_FULL), 1000,
+ sts, !(sts & GEN_CMD_FULL), 1000,
CMD_PKT_STATUS_TIMEOUT_US);
+
if (ret < 0) {
dev_err(dsi->dev, "failed to get available command FIFO\n");
return ret;
@@ -584,8 +586,9 @@ static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
dsi_write(dsi, DSI_GEN_HDR, val);
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
- val, val & (GEN_CMD_EMPTY | GEN_PLD_W_EMPTY),
+ sts, sts & (GEN_CMD_EMPTY | GEN_PLD_W_EMPTY),
1000, CMD_PKT_STATUS_TIMEOUT_US);
+
if (ret < 0) {
dev_err(dsi->dev, "failed to write command FIFO\n");
return ret;
@@ -594,8 +597,8 @@ static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
return 0;
}
-static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
- const struct mipi_dsi_msg *msg)
+static int dw_mipi_dsi_short_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
{
const u16 *tx_buf = msg->tx_buf;
u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
@@ -609,13 +612,14 @@ static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
}
-static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
- const struct mipi_dsi_msg *msg)
+static int dw_mipi_dsi_long_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
{
const u32 *tx_buf = msg->tx_buf;
int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
u32 remainder = 0;
+ u32 sts = 0;
if (msg->tx_len < 3) {
dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
@@ -635,7 +639,7 @@ static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
}
ret = readx_poll_timeout(readl, dsi->base + DSI_CMD_PKT_STATUS,
- val, !(val & GEN_PLD_W_FULL), 1000,
+ sts, !(sts & GEN_PLD_W_FULL), 1000,
CMD_PKT_STATUS_TIMEOUT_US);
if (ret < 0) {
dev_err(dsi->dev,
@@ -656,11 +660,15 @@ static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
switch (msg->type) {
case MIPI_DSI_DCS_SHORT_WRITE:
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
- ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+ ret = dw_mipi_dsi_short_write(dsi, msg);
break;
case MIPI_DSI_DCS_LONG_WRITE:
- ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+ case MIPI_DSI_GENERIC_LONG_WRITE:
+ ret = dw_mipi_dsi_long_write(dsi, msg);
break;
default:
dev_err(dsi->dev, "unsupported message type\n");
--
2.6.3
next prev parent reply other threads:[~2017-01-16 10:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-16 10:08 [PATCH v2 0/11] Rockchip dw-mipi-dsi driver Chris Zhong
2017-01-16 10:08 ` [PATCH v2 01/11] dt-bindings: add rk3399 support for dw-mipi-rockchip Chris Zhong
2017-01-19 15:42 ` Rob Herring
2017-01-16 10:08 ` [PATCH v2 02/11] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi Chris Zhong
2017-01-16 10:08 ` [PATCH v2 03/11] drm/rockchip/dsi: remove mode_valid function Chris Zhong
2017-01-16 10:08 ` [PATCH v2 04/11] dt-bindings: add power domain node for dw-mipi-rockchip Chris Zhong
2017-01-16 10:08 ` [PATCH v2 05/11] drm/rockchip/dsi: add dw-mipi power domain support Chris Zhong
2017-01-16 10:08 ` [PATCH v2 06/11] drm/rockchip/dsi: return probe defer if attach panel failed Chris Zhong
2017-01-16 10:08 ` [PATCH v2 07/11] drm/rockchip/dsi: fix mipi display can't found at init time Chris Zhong
2017-01-16 10:08 ` Chris Zhong [this message]
2017-01-16 10:08 ` [PATCH v2 09/11] drm/rockchip/dsi: decrease the value of Ths-prepare Chris Zhong
2017-01-16 10:08 ` [PATCH v2 10/11] drm/rockchip/dsi: fix phy clk lane stop state timeout Chris Zhong
2017-01-16 10:08 ` [PATCH v2 11/11] drm/rockchip/dsi: fix insufficient bandwidth of some panel Chris Zhong
2017-01-16 12:44 ` John Keeping
2017-01-17 9:31 ` Chris Zhong
[not found] ` <587DE489.2010004-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-01-17 10:54 ` John Keeping
2017-02-15 4:12 ` Chris Zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484561311-494-9-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mark.yao@rock-chips.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=seanpaul@chromium.org \
--cc=tfiga@chromium.org \
--cc=xbl@rock-chips.com \
--cc=yzq@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).