[PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

[PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

[Baoyou Xie]

This patch adds dt-binding documentation for zx2967 family
reset controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Shawn Guo <shawnguo@kernel.org>
---
 .../devicetree/bindings/reset/zte,zx2967-reset.txt   | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt

diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
new file mode 100644
index 0000000..b015508
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
@@ -0,0 +1,20 @@
+ZTE zx2967 SoCs Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: should be one of the following.
+	* zte,zx296718-reset
+- reg: physical base address of the controller and length of memory mapped
+	region.
+- #reset-cells: must be 1.
+
+example:
+
+	reset: reset-controller@1461060 {
+		compatible = "zte,zx296718-reset";
+		reg = <0x01461060 0x8>;
+		#reset-cells = <1>;
+	};
-- 
2.7.4

[PATCH v3 2/3] MAINTAINERS: add zx2967 reset controller driver to ARM ZTE architecture

[Baoyou Xie]

Add the zx2967 reset controller driver as maintained by ARM ZTE
architecture maintainers, as they're parts of the core IP.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e63063b..5fb9b62 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1987,9 +1987,11 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-zx/
 F:	drivers/clk/zte/
+F:	drivers/reset/reset-zx2967.c
 F:	drivers/soc/zte/
 F:	Documentation/devicetree/bindings/arm/zte.txt
 F:	Documentation/devicetree/bindings/clock/zx296702-clk.txt
+F:	Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
 F:	Documentation/devicetree/bindings/soc/zte/
 F:	include/dt-bindings/soc/zx*.h
 
-- 
2.7.4

[PATCH v3 3/3] reset: zx2967: add reset controller driver for ZTE's zx2967 family

[Baoyou Xie]

This patch adds reset controller driver for ZTE's zx2967 family.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
 drivers/reset/Kconfig        |   6 +++
 drivers/reset/Makefile       |   1 +
 drivers/reset/reset-zx2967.c | 106 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 113 insertions(+)
 create mode 100644 drivers/reset/reset-zx2967.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 172dc96..f4cdfe9 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -86,6 +86,12 @@ config RESET_UNIPHIER
 	  Say Y if you want to control reset signals provided by System Control
 	  block, Media I/O block, Peripheral Block.
 
+config RESET_ZX2967
+	bool "ZTE ZX2967 Reset Driver"
+	depends on ARCH_ZX || COMPILE_TEST
+	help
+	  This enables the reset controller driver for ZTE's zx2967 family.
+
 config RESET_ZYNQ
 	bool "ZYNQ Reset Driver" if COMPILE_TEST
 	default ARCH_ZYNQ
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 13b346e..2cd3f6c 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
+obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
diff --git a/drivers/reset/reset-zx2967.c b/drivers/reset/reset-zx2967.c
new file mode 100644
index 0000000..5d82151
--- /dev/null
+++ b/drivers/reset/reset-zx2967.c
@@ -0,0 +1,106 @@
+/*
+ * ZTE's zx2967 family reset controller driver
+ *
+ * Copyright (C) 2017 ZTE Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+struct zx2967_reset {
+	void __iomem			*reg_base;
+	spinlock_t			lock;
+	struct reset_controller_dev	rcdev;
+};
+
+static int zx2967_reset_act(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct zx2967_reset *reset = NULL;
+	int bank = id / 32;
+	int offset = id % 32;
+	u32 reg;
+	unsigned long flags;
+
+	reset = container_of(rcdev, struct zx2967_reset, rcdev);
+
+	spin_lock_irqsave(&reset->lock, flags);
+
+	reg = readl_relaxed(reset->reg_base + (bank * 4));
+	if (assert)
+		reg &= ~BIT(offset);
+	else
+		reg |= BIT(offset);
+	writel_relaxed(reg, reset->reg_base + (bank * 4));
+
+	spin_unlock_irqrestore(&reset->lock, flags);
+
+	return 0;
+}
+
+static int zx2967_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return zx2967_reset_act(rcdev, id, true);
+}
+
+static int zx2967_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return zx2967_reset_act(rcdev, id, false);
+}
+
+static struct reset_control_ops zx2967_reset_ops = {
+	.assert		= zx2967_reset_assert,
+	.deassert	= zx2967_reset_deassert,
+};
+
+static int zx2967_reset_probe(struct platform_device *pdev)
+{
+	struct zx2967_reset *reset;
+	struct resource *res;
+
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reset->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reset->reg_base))
+		return PTR_ERR(reset->reg_base);
+
+	spin_lock_init(&reset->lock);
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = resource_size(res) * 8;
+	reset->rcdev.ops = &zx2967_reset_ops;
+	reset->rcdev.of_node = pdev->dev.of_node;
+
+	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+}
+
+static const struct of_device_id zx2967_reset_dt_ids[] = {
+	 { .compatible = "zte,zx296718-reset", },
+	 {},
+};
+MODULE_DEVICE_TABLE(of, zx2967_reset_dt_ids);
+
+static struct platform_driver zx2967_reset_driver = {
+	.probe	= zx2967_reset_probe,
+	.driver = {
+		.name		= "zx2967-reset",
+		.of_match_table	= zx2967_reset_dt_ids,
+	},
+};
+
+builtin_platform_driver(zx2967_reset_driver);
+
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_DESCRIPTION("ZTE zx2967 Reset Controller Driver");
+MODULE_LICENSE("GPL");
-- 
2.7.4

Re: [PATCH v3 3/3] reset: zx2967: add reset controller driver for ZTE's zx2967 family

[Shawn Guo]

On Tue, Jan 17, 2017 at 11:22:57AM +0800, Baoyou Xie wrote:
> This patch adds reset controller driver for ZTE's zx2967 family.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>

Reviewed-by: Shawn Guo <shawnguo@kernel.org>

Re: [PATCH v3 3/3] reset: zx2967: add reset controller driver for ZTE's zx2967 family

[Paul Gortmaker]

On Mon, Jan 16, 2017 at 10:22 PM, Baoyou Xie <baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> This patch adds reset controller driver for ZTE's zx2967 family.
>
> Signed-off-by: Baoyou Xie <baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  drivers/reset/Kconfig        |   6 +++
>  drivers/reset/Makefile       |   1 +
>  drivers/reset/reset-zx2967.c | 106 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 113 insertions(+)
>  create mode 100644 drivers/reset/reset-zx2967.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 172dc96..f4cdfe9 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -86,6 +86,12 @@ config RESET_UNIPHIER
>           Say Y if you want to control reset signals provided by System Control
>           block, Media I/O block, Peripheral Block.
>
> +config RESET_ZX2967
> +       bool "ZTE ZX2967 Reset Driver"

This new driver just tripped my linux-next testing for non-modular code
that is using modular infrastructure.  Is there any value in having this
driver as a tristate, or should I send a patch to strip out the needless
references to anything modular?

Thanks,
Paul.
--

> +       depends on ARCH_ZX || COMPILE_TEST
> +       help
> +         This enables the reset controller driver for ZTE's zx2967 family.
> +
>  config RESET_ZYNQ
>         bool "ZYNQ Reset Driver" if COMPILE_TEST
>         default ARCH_ZYNQ
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 13b346e..2cd3f6c 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -13,4 +13,5 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o
>  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>  obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
>  obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
> +obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
>  obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
> diff --git a/drivers/reset/reset-zx2967.c b/drivers/reset/reset-zx2967.c
> new file mode 100644
> index 0000000..5d82151
> --- /dev/null
> +++ b/drivers/reset/reset-zx2967.c
> @@ -0,0 +1,106 @@
> +/*
> + * ZTE's zx2967 family reset controller driver
> + *
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include <linux/module.h>

[...]
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 3/3] reset: zx2967: add reset controller driver for ZTE's zx2967 family

[Baoyou Xie]

[-- Attachment #1: Type: text/plain, Size: 2568 bytes --]

Hi, paul:
   Could you give more detailed log?

On 2 February 2017 at 10:37, Paul Gortmaker <paul.gortmaker@windriver.com>
wrote:

> On Mon, Jan 16, 2017 at 10:22 PM, Baoyou Xie <baoyou.xie@linaro.org>
> wrote:
> > This patch adds reset controller driver for ZTE's zx2967 family.
> >
> > Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
> > ---
> >  drivers/reset/Kconfig        |   6 +++
> >  drivers/reset/Makefile       |   1 +
> >  drivers/reset/reset-zx2967.c | 106 ++++++++++++++++++++++++++++++
> +++++++++++++
> >  3 files changed, 113 insertions(+)
> >  create mode 100644 drivers/reset/reset-zx2967.c
> >
> > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> > index 172dc96..f4cdfe9 100644
> > --- a/drivers/reset/Kconfig
> > +++ b/drivers/reset/Kconfig
> > @@ -86,6 +86,12 @@ config RESET_UNIPHIER
> >           Say Y if you want to control reset signals provided by System
> Control
> >           block, Media I/O block, Peripheral Block.
> >
> > +config RESET_ZX2967
> > +       bool "ZTE ZX2967 Reset Driver"
>
> This new driver just tripped my linux-next testing for non-modular code
> that is using modular infrastructure.  Is there any value in having this
> driver as a tristate, or should I send a patch to strip out the needless
> references to anything modular?
>
> Thanks,
> Paul.
> --
>
> > +       depends on ARCH_ZX || COMPILE_TEST
> > +       help
> > +         This enables the reset controller driver for ZTE's zx2967
> family.
> > +
> >  config RESET_ZYNQ
> >         bool "ZYNQ Reset Driver" if COMPILE_TEST
> >         default ARCH_ZYNQ
> > diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> > index 13b346e..2cd3f6c 100644
> > --- a/drivers/reset/Makefile
> > +++ b/drivers/reset/Makefile
> > @@ -13,4 +13,5 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o
> >  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> >  obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
> >  obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
> > +obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
> >  obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
> > diff --git a/drivers/reset/reset-zx2967.c b/drivers/reset/reset-zx2967.c
> > new file mode 100644
> > index 0000000..5d82151
> > --- /dev/null
> > +++ b/drivers/reset/reset-zx2967.c
> > @@ -0,0 +1,106 @@
> > +/*
> > + * ZTE's zx2967 family reset controller driver
> > + *
> > + * Copyright (C) 2017 ZTE Ltd.
> > + *
> > + * Author: Baoyou Xie <baoyou.xie@linaro.org>
> > + *
> > + * License terms: GNU General Public License (GPL) version 2
> > + */
> > +
> > +#include <linux/module.h>
>
> [...]
>

[-- Attachment #2: Type: text/html, Size: 3554 bytes --]

Re: [PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

[Philipp Zabel]

On Tue, 2017-01-17 at 11:22 +0800, Baoyou Xie wrote:
> This patch adds dt-binding documentation for zx2967 family
> reset controller.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
> Reviewed-by: Shawn Guo <shawnguo@kernel.org>

Thanks, I've applied all three patches with Shawn's Reviewed-by: on the
driver patch.

regards
Philipp

> ---
>  .../devicetree/bindings/reset/zte,zx2967-reset.txt   | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> new file mode 100644
> index 0000000..b015508
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> @@ -0,0 +1,20 @@
> +ZTE zx2967 SoCs Reset Controller
> +=======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: should be one of the following.
> +	* zte,zx296718-reset
> +- reg: physical base address of the controller and length of memory mapped
> +	region.
> +- #reset-cells: must be 1.
> +
> +example:
> +
> +	reset: reset-controller@1461060 {
> +		compatible = "zte,zx296718-reset";
> +		reg = <0x01461060 0x8>;
> +		#reset-cells = <1>;
> +	};

Re: [PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

[Rob Herring]

On Tue, Jan 17, 2017 at 11:22:55AM +0800, Baoyou Xie wrote:
> This patch adds dt-binding documentation for zx2967 family
> reset controller.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Reviewed-by: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>  .../devicetree/bindings/reset/zte,zx2967-reset.txt   | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html