Re: [PATCH v3 1/3] dt: bindings: add documentation for zx2967 family reset controller

[Philipp Zabel <p.zabel@pengutronix.de>]

On Tue, 2017-01-17 at 11:22 +0800, Baoyou Xie wrote:
> This patch adds dt-binding documentation for zx2967 family
> reset controller.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
> Reviewed-by: Shawn Guo <shawnguo@kernel.org>

Thanks, I've applied all three patches with Shawn's Reviewed-by: on the
driver patch.

regards
Philipp

> ---
>  .../devicetree/bindings/reset/zte,zx2967-reset.txt   | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> new file mode 100644
> index 0000000..b015508
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> @@ -0,0 +1,20 @@
> +ZTE zx2967 SoCs Reset Controller
> +=======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: should be one of the following.
> +	* zte,zx296718-reset
> +- reg: physical base address of the controller and length of memory mapped
> +	region.
> +- #reset-cells: must be 1.
> +
> +example:
> +
> +	reset: reset-controller@1461060 {
> +		compatible = "zte,zx296718-reset";
> +		reg = <0x01461060 0x8>;
> +		#reset-cells = <1>;
> +	};