From mboxrd@z Thu Jan 1 00:00:00 1970 From: Raviteja Garimella Subject: [PATCH v2 0/3] Support for USB DRD Phy driver for NS2 Date: Wed, 18 Jan 2017 17:50:01 +0530 Message-ID: <1484742004-6792-1-git-send-email-raviteja.garimella@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Rob Herring , Mark Rutland , Kishon Vijay Abraham I , Ray Jui , Scott Branden , Jon Mason , Catalin Marinas , Will Deacon Cc: devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Changes from v1: =============== 1. Initialize file operatiosn .owner field with THIS_MODULE 2. Remove unnecessary gpio example in DT bindings documentation. This is previously acked by Rob Herring . Introduction: This patch adds support for USB Dual Role Device Phy for Broadcom Northstar2 SoC. Apart from the new phy driver, this patchset contains changes to Kconfig, Makefile, and Device tree files. This patchset is tested on Broadcom NS2 BCM958712K reference board. Repo: https://github.com/Broadcom/arm64-linux.git Branch: ns2_drdphy_v2 Raviteja Garimella (3): Add DT bindings documentation for NS2 USB DRD phy Broadcom USB DRD Phy driver for Northstar2 DT nodes for Broadcom Northstar2 USB DRD Phy .../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 30 ++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 14 + drivers/phy/Kconfig | 13 + drivers/phy/Makefile | 1 + drivers/phy/phy-bcm-ns2-usbdrd.c | 588 +++++++++++++++++++++ 5 files changed, 646 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt create mode 100644 drivers/phy/phy-bcm-ns2-usbdrd.c -- 2.1.0