From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Gaignard Subject: [PATCH v9 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU Date: Fri, 20 Jan 2017 10:15:08 +0100 Message-ID: <1484903709-11650-8-git-send-email-benjamin.gaignard@st.com> References: <1484903709-11650-1-git-send-email-benjamin.gaignard@st.com> Return-path: In-Reply-To: <1484903709-11650-1-git-send-email-benjamin.gaignard-qxv4g6HH51o@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, alexandre.torgue-qxv4g6HH51o@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, knaack.h-Mmb7MZpHnFY@public.gmane.org, lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org, pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: fabrice.gasnier-qxv4g6HH51o@public.gmane.org, gerald.baeza-qxv4g6HH51o@public.gmane.org, arnaud.pouliquen-qxv4g6HH51o@public.gmane.org, linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Benjamin Gaignard List-Id: devicetree@vger.kernel.org Add Timers and it sub-nodes into DT for stm32f429 family. version 9: - re-order timers node per addresses version 6: - split patch in two: one for SoC family and one for stm32f469 discovery board. version 5: - rename gptimer node to timers - re-order timers node per addresses version 4: - remove unwanted indexing in pwm@ and timer@ node name - use "reg" instead of additional parameters to set timer configuration version 3: - use "st,stm32-timer-trigger" in DT version 2: - use parameters to describe hardware capabilities - do not use references for pwm and iio timer subnodes Signed-off-by: Benjamin Gaignard --- arch/arm/boot/dts/stm32f429.dtsi | 275 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 275 insertions(+) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e4dae0e..b608935 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -79,6 +79,27 @@ status = "disabled"; }; + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 128>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; @@ -87,6 +108,27 @@ status = "disabled"; }; + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 129>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; @@ -95,6 +137,27 @@ status = "disabled"; }; + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 130>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; @@ -102,6 +165,27 @@ clocks = <&rcc 0 131>; }; + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 131>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; @@ -110,6 +194,22 @@ status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 132>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; @@ -118,6 +218,73 @@ status = "disabled"; }; + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 133>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 134>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 135>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 136>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + usart2: serial@40004400 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; @@ -169,6 +336,48 @@ status = "disabled"; }; + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 161>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart1: serial@40011000 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011000 0x400>; @@ -201,6 +410,57 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 176>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 177>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 178>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; @@ -355,6 +615,21 @@ slew-rate = <2>; }; }; + + pwm1_pins: pwm@1 { + pins { + pinmux = , + , + ; + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = , + ; + }; + }; }; rcc: rcc@40023810 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html