From: Rameshwar Prasad Sahu <rsahu@apm.com>
To: olof@lixom.net, tj@kernel.org, arnd@arndb.de
Cc: devicetree@vger.kernel.org, mlangsdo@redhat.com,
linux-scsi@vger.kernel.org, jcm@redhat.com,
Rameshwar Prasad Sahu <rsahu@apm.com>,
patches@apm.com, linux-ide@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1
Date: Fri, 20 Jan 2017 17:41:58 +0530 [thread overview]
Message-ID: <1484914318-5406-1-git-send-email-rsahu@apm.com> (raw)
This patch enables NCQ support for APM X-Gene SATA controller hardware v1.1
that was broken with hardware v1.0. Second thing, here we should not assume
XGENE_AHCI_V2 always in case of having valid _CID in ACPI table. I need to
remove this assumption because V1_1 also has a valid _CID for backward
compatibly with v1.
v2 changes:
1. Changed patch description
Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
drivers/ata/ahci_xgene.c | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 73b19b2..8b88be9 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -87,6 +87,7 @@
enum xgene_ahci_version {
XGENE_AHCI_V1 = 1,
+ XGENE_AHCI_V1_1,
XGENE_AHCI_V2,
};
@@ -734,6 +735,7 @@ static struct scsi_host_template ahci_platform_sht = {
#ifdef CONFIG_ACPI
static const struct acpi_device_id xgene_ahci_acpi_match[] = {
{ "APMC0D0D", XGENE_AHCI_V1},
+ { "APMC0D67", XGENE_AHCI_V1_1},
{ "APMC0D32", XGENE_AHCI_V2},
{},
};
@@ -742,6 +744,7 @@ MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
static const struct of_device_id xgene_ahci_of_match[] = {
{.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1},
+ {.compatible = "apm,xgene-ahci-v1-1", .data = (void *) XGENE_AHCI_V1_1},
{.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2},
{},
};
@@ -755,8 +758,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
struct resource *res;
const struct of_device_id *of_devid;
enum xgene_ahci_version version = XGENE_AHCI_V1;
- const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
- &xgene_ahci_v2_port_info };
+ const struct ata_port_info *ppi;
int rc;
hpriv = ahci_platform_get_resources(pdev);
@@ -821,8 +823,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n",
__func__);
version = XGENE_AHCI_V1;
- } else if (info->valid & ACPI_VALID_CID) {
- version = XGENE_AHCI_V2;
}
}
}
@@ -858,18 +858,20 @@ skip_clk_phy:
switch (version) {
case XGENE_AHCI_V1:
+ ppi = &xgene_ahci_v1_port_info;
hpriv->flags = AHCI_HFLAG_NO_NCQ;
break;
case XGENE_AHCI_V2:
+ ppi = &xgene_ahci_v2_port_info;
hpriv->flags |= AHCI_HFLAG_YES_FBS;
hpriv->irq_handler = xgene_ahci_irq_intr;
break;
default:
+ ppi = &xgene_ahci_v1_port_info;
break;
}
- rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1],
- &ahci_platform_sht);
+ rc = ahci_platform_init_host(pdev, hpriv, ppi, &ahci_platform_sht);
if (rc)
goto disable_resources;
--
1.7.1
next reply other threads:[~2017-01-20 12:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 12:11 Rameshwar Prasad Sahu [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-11-18 9:45 [PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1 Rameshwar Prasad Sahu
2017-01-17 14:55 ` Rameshwar Sahu
2017-01-18 19:23 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484914318-5406-1-git-send-email-rsahu@apm.com \
--to=rsahu@apm.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mlangsdo@redhat.com \
--cc=olof@lixom.net \
--cc=patches@apm.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).