From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Hansson Subject: [PATCH 5/6] mmc: dt: Document binding for eMMC DDR 3.3V I/O voltage support Date: Wed, 25 Jan 2017 16:12:22 +0100 Message-ID: <1485357143-23280-6-git-send-email-ulf.hansson@linaro.org> References: <1485357143-23280-1-git-send-email-ulf.hansson@linaro.org> Return-path: In-Reply-To: <1485357143-23280-1-git-send-email-ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Ulf Hansson Cc: Jaehoon Chung , Adrian Hunter , Shawn Lin , Stefan Wahren , Fabio Estevam , Jan Glauber , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring List-Id: devicetree@vger.kernel.org Cc: Cc: Rob Herring Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mmc.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 8a37782..c7f4a0e 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -40,6 +40,7 @@ Optional properties: - cap-mmc-hw-reset: eMMC hardware reset is supported - cap-sdio-irq: enable SDIO IRQ signalling on this interface - full-pwr-cycle: full power cycle of the card is supported +- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported - mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html