[PATCH 5/6] mmc: dt: Document binding for eMMC DDR 3.3V I/O voltage support

[PATCH 5/6] mmc: dt: Document binding for eMMC DDR 3.3V I/O voltage support

[Ulf Hansson]

Cc: <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 8a37782..c7f4a0e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -40,6 +40,7 @@ Optional properties:
 - cap-mmc-hw-reset: eMMC hardware reset is supported
 - cap-sdio-irq: enable SDIO IRQ signalling on this interface
 - full-pwr-cycle: full power cycle of the card is supported
+- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported
 - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
 - mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 5/6] mmc: dt: Document binding for eMMC DDR 3.3V I/O voltage support

[Rob Herring]

On Wed, Jan 25, 2017 at 04:12:22PM +0100, Ulf Hansson wrote:
> Cc: <devicetree@vger.kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>  Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>