From: Michael Heimpold <michael.heimpold-eS4NqCHxEME@public.gmane.org>
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
stefan.wahren-eS4NqCHxEME@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
Michael Heimpold <michael.heimpold-eS4NqCHxEME@public.gmane.org>
Subject: [PATCH v3 0/9] ARM: dts: support I2SE Duckbill devices
Date: Tue, 31 Jan 2017 07:51:06 +0100 [thread overview]
Message-ID: <1485845475-3129-1-git-send-email-michael.heimpold@i2se.com> (raw)
This series updates/adds Device Tree support for I2SE's Duckbill
device family.
The Duckbill devices are small, pen-drive sized boards based on
NXP's i.MX28 SoC. While the initial variants (Duckbill series) were
equipped with a micro SD card slot only, the latest generation
(Duckbill 2 series) have an additional internal eMMC onboard.
Both device generations consists of four "family members":
- Duckbill/Duckbill 2: generic board, intended to be used as
baseboard for custom designs and/or as development board
- Duckbill EnOcean/Duckbill 2 EnOcean: come with an EnOcean
daugther board equipped with the popular TCM310 module
- Duckbill 485/Duckbill 2 485: as the name implies, these
devices are intended to be used as Ethernet - RS485 converters
- Duckbill SPI/Duckbill 2 SPI: not sold separately, but used
in I2SE's development kits for Green PHY HomePlug Powerline
communication
Because the Duckbill series is EOL, this patch series only adds
support for the latest Duckbill 2 series devices. However,
support for the generic Duckbill board was already mainline,
so update it to match vendor tree DT.
Changes since v2:
- re-ordered documentation patch and fixed typos
- re-worded some commit messages to better reflect patch content
- fixed Makefile beginner issues
- added Acked-bys where applicable
Changes since v1:
- dropped device tree include (shared common definitions)
- added patch 9 (DT documentation file)
- applied reviewers hints
- rebased
Michael Heimpold (9):
ARM: dts: imx28: add alternative pinmuxing for mmc2
ARM: dts: imx28: rename mmc2_sck_cfg
ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg
ARM: dts: imx28-duckbill: update to match vendor distributed DT
Documentation: DT: add entries for I2SE boards
ARM: dts: add support for I2SE Duckbill 2 boards
ARM: dts: add support for I2SE Duckbill 2 485
ARM: dts: add support for I2SE Duckbill 2 EnOcean
ARM: dts: add support for I2SE Duckbill 2 SPI
Documentation/devicetree/bindings/arm/i2se.txt | 22 +++
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx28-duckbill-2-485.dts | 189 +++++++++++++++++++++
arch/arm/boot/dts/imx28-duckbill-2-enocean.dts | 220 +++++++++++++++++++++++++
arch/arm/boot/dts/imx28-duckbill-2-spi.dts | 199 ++++++++++++++++++++++
arch/arm/boot/dts/imx28-duckbill-2.dts | 183 ++++++++++++++++++++
arch/arm/boot/dts/imx28-duckbill.dts | 81 ++++++---
arch/arm/boot/dts/imx28-m28cu3.dts | 2 +-
arch/arm/boot/dts/imx28.dtsi | 28 +++-
9 files changed, 901 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/i2se.txt
create mode 100644 arch/arm/boot/dts/imx28-duckbill-2-485.dts
create mode 100644 arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
create mode 100644 arch/arm/boot/dts/imx28-duckbill-2-spi.dts
create mode 100644 arch/arm/boot/dts/imx28-duckbill-2.dts
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-01-31 6:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-31 6:51 Michael Heimpold [this message]
2017-01-31 6:51 ` [PATCH v3 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2 Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 2/9] ARM: dts: imx28: rename mmc2_sck_cfg Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 3/9] ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg Michael Heimpold
[not found] ` <1485845475-3129-1-git-send-email-michael.heimpold-eS4NqCHxEME@public.gmane.org>
2017-01-31 6:51 ` [PATCH v3 4/9] ARM: dts: imx28-duckbill: update to match vendor distributed DT Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 5/9] Documentation: DT: add entries for I2SE boards Michael Heimpold
[not found] ` <1485845475-3129-6-git-send-email-michael.heimpold-eS4NqCHxEME@public.gmane.org>
2017-02-01 17:18 ` Rob Herring
2017-02-08 6:43 ` Michael Heimpold
[not found] ` <769dba11-e290-50e0-d894-9f4ea08eb652-eS4NqCHxEME@public.gmane.org>
2017-02-08 14:37 ` Rob Herring
2017-01-31 6:51 ` [PATCH v3 6/9] ARM: dts: add support for I2SE Duckbill 2 boards Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 7/9] ARM: dts: add support for I2SE Duckbill 2 485 Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 8/9] ARM: dts: add support for I2SE Duckbill 2 EnOcean Michael Heimpold
2017-01-31 6:51 ` [PATCH v3 9/9] ARM: dts: add support for I2SE Duckbill 2 SPI Michael Heimpold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485845475-3129-1-git-send-email-michael.heimpold@i2se.com \
--to=michael.heimpold-es4nqchxeme@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=stefan.wahren-eS4NqCHxEME@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).