devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org,
	ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org,
	dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org,
	troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org,
	festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org,
	stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org,
	hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org,
	krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>,
	Sriram Dash <sriram.dash-3arQi8VN3Tc@public.gmane.org>
Subject: [PATCH v12 7/9] usb: ehci: use bus->sysdev for DMA configuration
Date: Mon, 6 Feb 2017 17:13:39 +0800	[thread overview]
Message-ID: <1486372421-29073-8-git-send-email-peter.chen@nxp.com> (raw)
In-Reply-To: <1486372421-29073-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>

Set the dma for ehci from sysdev. The sysdev is pointing to device that
is known to the system firmware or hardware.

Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Sriram Dash <sriram.dash-3arQi8VN3Tc@public.gmane.org>
Signed-off-by: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
---
 drivers/usb/host/ehci-mem.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 4de4301..f54478d 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -46,21 +46,21 @@ static inline void ehci_qtd_init(struct ehci_hcd *ehci, struct ehci_qtd *qtd,
 	INIT_LIST_HEAD (&qtd->qtd_list);
 }
 
-static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, gfp_t flags)
+static struct ehci_qtd *ehci_qtd_alloc(struct ehci_hcd *ehci, gfp_t flags)
 {
 	struct ehci_qtd		*qtd;
 	dma_addr_t		dma;
 
-	qtd = dma_pool_alloc (ehci->qtd_pool, flags, &dma);
+	qtd = dma_pool_alloc(ehci->qtd_pool, flags, &dma);
 	if (qtd != NULL) {
 		ehci_qtd_init(ehci, qtd, dma);
 	}
 	return qtd;
 }
 
-static inline void ehci_qtd_free (struct ehci_hcd *ehci, struct ehci_qtd *qtd)
+static inline void ehci_qtd_free(struct ehci_hcd *ehci, struct ehci_qtd *qtd)
 {
-	dma_pool_free (ehci->qtd_pool, qtd, qtd->qtd_dma);
+	dma_pool_free(ehci->qtd_pool, qtd, qtd->qtd_dma);
 }
 
 
@@ -72,12 +72,12 @@ static void qh_destroy(struct ehci_hcd *ehci, struct ehci_qh *qh)
 		BUG ();
 	}
 	if (qh->dummy)
-		ehci_qtd_free (ehci, qh->dummy);
+		ehci_qtd_free(ehci, qh->dummy);
 	dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma);
 	kfree(qh);
 }
 
-static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
+static struct ehci_qh *ehci_qh_alloc(struct ehci_hcd *ehci, gfp_t flags)
 {
 	struct ehci_qh		*qh;
 	dma_addr_t		dma;
@@ -96,7 +96,7 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
 	INIT_LIST_HEAD(&qh->unlink_node);
 
 	/* dummy td enables safe urb queuing */
-	qh->dummy = ehci_qtd_alloc (ehci, flags);
+	qh->dummy = ehci_qtd_alloc(ehci, flags);
 	if (qh->dummy == NULL) {
 		ehci_dbg (ehci, "no dummy td\n");
 		goto fail1;
@@ -117,7 +117,7 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
  * This is the initialisation and cleanup code.
  */
 
-static void ehci_mem_cleanup (struct ehci_hcd *ehci)
+static void ehci_mem_cleanup(struct ehci_hcd *ehci)
 {
 	if (ehci->async)
 		qh_destroy(ehci, ehci->async);
@@ -138,7 +138,7 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 	ehci->sitd_pool = NULL;
 
 	if (ehci->periodic)
-		dma_free_coherent (ehci_to_hcd(ehci)->self.controller,
+		dma_free_coherent(ehci_to_hcd(ehci)->self.sysdev,
 			ehci->periodic_size * sizeof (u32),
 			ehci->periodic, ehci->periodic_dma);
 	ehci->periodic = NULL;
@@ -154,8 +154,8 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	int i;
 
 	/* QTDs for control/bulk/intr transfers */
-	ehci->qtd_pool = dma_pool_create ("ehci_qtd",
-			ehci_to_hcd(ehci)->self.controller,
+	ehci->qtd_pool = dma_pool_create("ehci_qtd",
+			ehci_to_hcd(ehci)->self.sysdev,
 			sizeof (struct ehci_qtd),
 			32 /* byte alignment (for hw parts) */,
 			4096 /* can't cross 4K */);
@@ -164,22 +164,22 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	}
 
 	/* QHs for control/bulk/intr transfers */
-	ehci->qh_pool = dma_pool_create ("ehci_qh",
-			ehci_to_hcd(ehci)->self.controller,
+	ehci->qh_pool = dma_pool_create("ehci_qh",
+			ehci_to_hcd(ehci)->self.sysdev,
 			sizeof(struct ehci_qh_hw),
 			32 /* byte alignment (for hw parts) */,
 			4096 /* can't cross 4K */);
 	if (!ehci->qh_pool) {
 		goto fail;
 	}
-	ehci->async = ehci_qh_alloc (ehci, flags);
+	ehci->async = ehci_qh_alloc(ehci, flags);
 	if (!ehci->async) {
 		goto fail;
 	}
 
 	/* ITD for high speed ISO transfers */
-	ehci->itd_pool = dma_pool_create ("ehci_itd",
-			ehci_to_hcd(ehci)->self.controller,
+	ehci->itd_pool = dma_pool_create("ehci_itd",
+			ehci_to_hcd(ehci)->self.sysdev,
 			sizeof (struct ehci_itd),
 			32 /* byte alignment (for hw parts) */,
 			4096 /* can't cross 4K */);
@@ -188,8 +188,8 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	}
 
 	/* SITD for full/low speed split ISO transfers */
-	ehci->sitd_pool = dma_pool_create ("ehci_sitd",
-			ehci_to_hcd(ehci)->self.controller,
+	ehci->sitd_pool = dma_pool_create("ehci_sitd",
+			ehci_to_hcd(ehci)->self.sysdev,
 			sizeof (struct ehci_sitd),
 			32 /* byte alignment (for hw parts) */,
 			4096 /* can't cross 4K */);
@@ -199,7 +199,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 
 	/* Hardware periodic table */
 	ehci->periodic = (__le32 *)
-		dma_alloc_coherent (ehci_to_hcd(ehci)->self.controller,
+		dma_alloc_coherent(ehci_to_hcd(ehci)->self.sysdev,
 			ehci->periodic_size * sizeof(__le32),
 			&ehci->periodic_dma, flags);
 	if (ehci->periodic == NULL) {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-02-06  9:13 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-06  9:13 [PATCH v12 0/9] power: add power sequence library Peter Chen
2017-02-06  9:13 ` [PATCH v12 1/9] binding-doc: power: pwrseq-generic: add binding doc for generic " Peter Chen
2017-02-06  9:13 ` [PATCH v12 2/9] power: add " Peter Chen
2017-02-06  9:13 ` [PATCH v12 3/9] usb: separate out sysdev pointer from usb_bus Peter Chen
2017-02-09  6:20   ` Vivek Gautam
2017-02-10  2:42     ` Peter Chen
2017-02-06  9:13 ` [PATCH v12 4/9] usb: chipidea: use bus->sysdev for DMA configuration Peter Chen
2017-02-06  9:13 ` [PATCH v12 5/9] usb: ehci: fsl: " Peter Chen
2017-02-06  9:13 ` [PATCH v12 6/9] usb: xhci: " Peter Chen
2017-02-08 11:57   ` Vivek Gautam
2017-02-09  1:45     ` Peter Chen
2017-02-08 20:43   ` Jack Pham
     [not found]     ` <20170208204300.GC8068-NjF/qFWh7jSrUKQWM4GlyCPyLMyjRtWwAL8bYrjMMd8@public.gmane.org>
2017-02-09  1:41       ` Peter Chen
2017-02-09  6:15         ` Vivek Gautam
2017-02-09 11:53     ` Roger Quadros
2017-02-09 11:54       ` Roger Quadros
2017-02-09 12:10         ` Vivek Gautam
2017-02-10  1:40           ` Peter Chen
2017-02-09 12:08       ` Vivek Gautam
     [not found] ` <1486372421-29073-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2017-02-06  9:13   ` Peter Chen [this message]
2017-02-06  9:13   ` [PATCH v12 8/9] binding-doc: usb: usb-device: add optional properties for power sequence Peter Chen
2017-02-06  9:13 ` [PATCH v12 9/9] usb: core: add power sequence handling for USB devices Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486372421-29073-8-git-send-email-peter.chen@nxp.com \
    --to=peter.chen-3arqi8vn3tc@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org \
    --cc=krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org \
    --cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sriram.dash-3arQi8VN3Tc@public.gmane.org \
    --cc=stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
    --cc=stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org \
    --cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).