From: Jun Gao <jun.gao@mediatek.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
Jun Gao <jun.gao@mediatek.com>
Subject: [PATCH v2 2/2] arm: dts: mt2701: Add i2c device node
Date: Wed, 15 Feb 2017 10:32:56 +0800 [thread overview]
Message-ID: <1487125976-25243-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1487125976-25243-1-git-send-email-jun.gao@mediatek.com>
From: Jun Gao <jun.gao@mediatek.com>
Add i2c device node for MT2701.
Change-Id: Idd33ad9010c43809328814350f9c29284891d171
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
};
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ i2c0_pins_a: i2c0@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt2701-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
--
1.7.9.5
prev parent reply other threads:[~2017-02-15 2:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-15 2:32 [PATCH v2 0/2] Add i2c DT binding and device node for Mediatek MT2701 Soc Jun Gao
2017-02-15 2:32 ` [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform Jun Gao
2017-02-27 17:14 ` Rob Herring
2017-02-27 17:15 ` Rob Herring
2017-02-15 2:32 ` Jun Gao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487125976-25243-3-git-send-email-jun.gao@mediatek.com \
--to=jun.gao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).