[PATCH RFC 2/3] ARM64: bcm2837-rpi: remove link to bcm2835-rpi.dtsi

[Stefan Wahren <stefan.wahren@i2se.com>]

Before we can make any Raspberry Pi specific changes we need
a local copy of bcm2835-rpi.dtsi instead of a link. After that
we include this file and remove the unnecessary link.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi    |    1 -
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts |    2 +-
 arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi    |   89 ++++++++++++++++++++++
 3 files changed, 90 insertions(+), 2 deletions(-)
 delete mode 120000 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
deleted file mode 120000
index 3937b77..0000000
--- a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index c309633..e80db7e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2837-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi
new file mode 100644
index 0000000..6ddf7df
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi.dtsi
@@ -0,0 +1,89 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
-- 
1.7.9.5