From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Leach Subject: [PATCH] arm64: dts: juno: update definition for programmable replicator. Date: Fri, 17 Feb 2017 19:13:10 +0000 Message-ID: <1487358790-2618-1-git-send-email-mike.leach@linaro.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, coresight-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, sudeep.holla-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Mike Leach List-Id: devicetree@vger.kernel.org Juno platforms have a programmable replicator splitting the trace output to TPIU and ETR. Currently this is not being programmed as it is being treated as a none-programmable replicator - which is the default operational mode for these devices. The TPIU in the system is enabled by default, and this combination is causing back-pressure in the trace system resulting in overflows at the source. Replaces the existing definition with one that defines the programmable replicator, using the "qcom,coresight-replicator1x" driver that provides the correct functionality for CoreSight programmable replicators. Signed-off-by: Mike Leach --- arch/arm64/boot/dts/arm/juno-base.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 9d799d9..6546e23 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -372,12 +372,14 @@ }; }; - coresight-replicator { - /* - * Non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; + coresight-replicator@20120000 { + + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html