* [PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding
2017-03-03 2:05 [PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc Jun Gao
@ 2017-03-03 2:05 ` Jun Gao
2017-03-03 2:05 ` [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node Jun Gao
1 sibling, 0 replies; 3+ messages in thread
From: Jun Gao @ 2017-03-03 2:05 UTC (permalink / raw)
To: Wolfram Sang, Matthias Brugger
Cc: srv_heupstream, devicetree, linux-i2c, linux-arm-kernel,
linux-kernel, linux-mediatek, Jun Gao
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c binding to i2c-mt6577.txt and there is no need to
modify i2c driver.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
.../devicetree/bindings/i2c/i2c-mt6577.txt | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
index 0ce6fa3..27dbbf9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -4,11 +4,12 @@ The Mediatek's I2C controller is used to interface with I2C devices.
Required properties:
- compatible: value should be either of the following.
- (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
- (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
- (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
- (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
- (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ "mediatek,mt2701-i2c"
+ "mediatek,mt6577-i2c"
+ "mediatek,mt6589-i2c"
+ "mediatek,mt8127-i2c"
+ "mediatek,mt8135-i2c"
+ "mediatek,mt8173-i2c"
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
2017-03-03 2:05 [PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc Jun Gao
2017-03-03 2:05 ` [PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding Jun Gao
@ 2017-03-03 2:05 ` Jun Gao
1 sibling, 0 replies; 3+ messages in thread
From: Jun Gao @ 2017-03-03 2:05 UTC (permalink / raw)
To: Wolfram Sang, Matthias Brugger
Cc: srv_heupstream, devicetree, linux-i2c, linux-arm-kernel,
linux-kernel, linux-mediatek, Jun Gao
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c device node.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 44 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
};
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&pio {
+ i2c0_pins_a: i2c0@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt2701-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread