From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
lgirdwood@gmail.com, robh+dt@kernel.org
Subject: [PATCH 4/5] ASoC: cs35l35: Add local variable for dev in probe
Date: Wed, 8 Mar 2017 16:42:50 +0000 [thread overview]
Message-ID: <1488991371-22513-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1488991371-22513-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Tidy up the code a little by adding a local variable for i2c_client->dev
rather than referring to it explicitly everytime.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
sound/soc/codecs/cs35l35.c | 66 ++++++++++++++++++----------------------------
1 file changed, 26 insertions(+), 40 deletions(-)
diff --git a/sound/soc/codecs/cs35l35.c b/sound/soc/codecs/cs35l35.c
index 5a9fe5a..99bcdb9 100644
--- a/sound/soc/codecs/cs35l35.c
+++ b/sound/soc/codecs/cs35l35.c
@@ -1354,16 +1354,14 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct cs35l35_private *cs35l35;
- struct cs35l35_platform_data *pdata =
- dev_get_platdata(&i2c_client->dev);
+ struct device *dev = &i2c_client->dev;
+ struct cs35l35_platform_data *pdata = dev_get_platdata(dev);
int i;
int ret;
unsigned int devid = 0;
unsigned int reg;
- cs35l35 = devm_kzalloc(&i2c_client->dev,
- sizeof(struct cs35l35_private),
- GFP_KERNEL);
+ cs35l35 = devm_kzalloc(dev, sizeof(struct cs35l35_private), GFP_KERNEL);
if (!cs35l35)
return -ENOMEM;
@@ -1371,7 +1369,7 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
cs35l35->regmap = devm_regmap_init_i2c(i2c_client, &cs35l35_regmap);
if (IS_ERR(cs35l35->regmap)) {
ret = PTR_ERR(cs35l35->regmap);
- dev_err(&i2c_client->dev, "regmap_init() failed: %d\n", ret);
+ dev_err(dev, "regmap_init() failed: %d\n", ret);
goto err;
}
@@ -1379,22 +1377,18 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
cs35l35->supplies[i].supply = cs35l35_supplies[i];
cs35l35->num_supplies = ARRAY_SIZE(cs35l35_supplies);
- ret = devm_regulator_bulk_get(&i2c_client->dev,
- cs35l35->num_supplies,
- cs35l35->supplies);
+ ret = devm_regulator_bulk_get(dev, cs35l35->num_supplies,
+ cs35l35->supplies);
if (ret != 0) {
- dev_err(&i2c_client->dev,
- "Failed to request core supplies: %d\n",
- ret);
+ dev_err(dev, "Failed to request core supplies: %d\n", ret);
return ret;
}
if (pdata) {
cs35l35->pdata = *pdata;
} else {
- pdata = devm_kzalloc(&i2c_client->dev,
- sizeof(struct cs35l35_platform_data),
- GFP_KERNEL);
+ pdata = devm_kzalloc(dev, sizeof(struct cs35l35_platform_data),
+ GFP_KERNEL);
if (!pdata)
return -ENOMEM;
if (i2c_client->dev.of_node) {
@@ -1409,24 +1403,21 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
ret = regulator_bulk_enable(cs35l35->num_supplies,
cs35l35->supplies);
if (ret != 0) {
- dev_err(&i2c_client->dev,
- "Failed to enable core supplies: %d\n",
- ret);
+ dev_err(dev, "Failed to enable core supplies: %d\n", ret);
return ret;
}
/* returning NULL can be valid if in stereo mode */
- cs35l35->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
- "reset", GPIOD_OUT_LOW);
+ cs35l35->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
if (IS_ERR(cs35l35->reset_gpio)) {
ret = PTR_ERR(cs35l35->reset_gpio);
if (ret == -EBUSY) {
- dev_info(&i2c_client->dev,
+ dev_info(dev,
"Reset line busy, assuming shared reset\n");
cs35l35->reset_gpio = NULL;
} else {
- dev_err(&i2c_client->dev,
- "Failed to get reset GPIO: %d\n", ret);
+ dev_err(dev, "Failed to get reset GPIO: %d\n", ret);
goto err;
}
}
@@ -1435,11 +1426,11 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
init_completion(&cs35l35->pdn_done);
- ret = devm_request_threaded_irq(&i2c_client->dev, i2c_client->irq, NULL,
- cs35l35_irq, IRQF_ONESHOT | IRQF_TRIGGER_LOW,
- "cs35l35", cs35l35);
+ ret = devm_request_threaded_irq(dev, i2c_client->irq, NULL, cs35l35_irq,
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+ "cs35l35", cs35l35);
if (ret != 0) {
- dev_err(&i2c_client->dev, "Failed to request IRQ: %d\n", ret);
+ dev_err(dev, "Failed to request IRQ: %d\n", ret);
goto err;
}
/* initialize codec */
@@ -1452,8 +1443,7 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
devid |= (reg & 0xF0) >> 4;
if (devid != CS35L35_CHIP_ID) {
- dev_err(&i2c_client->dev,
- "CS35L35 Device ID (%X). Expected ID %X\n",
+ dev_err(dev, "CS35L35 Device ID (%X). Expected ID %X\n",
devid, CS35L35_CHIP_ID);
ret = -ENODEV;
goto err;
@@ -1461,21 +1451,19 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
ret = regmap_read(cs35l35->regmap, CS35L35_REV_ID, ®);
if (ret < 0) {
- dev_err(&i2c_client->dev, "Get Revision ID failed: %d\n", ret);
+ dev_err(dev, "Get Revision ID failed: %d\n", ret);
goto err;
}
ret = regmap_register_patch(cs35l35->regmap, cs35l35_errata_patch,
ARRAY_SIZE(cs35l35_errata_patch));
if (ret < 0) {
- dev_err(&i2c_client->dev, "Failed to apply errata patch: %d\n",
- ret);
+ dev_err(dev, "Failed to apply errata patch: %d\n", ret);
goto err;
}
- dev_info(&i2c_client->dev,
- "Cirrus Logic CS35L35 (%x), Revision: %02X\n", devid,
- ret & 0xFF);
+ dev_info(dev, "Cirrus Logic CS35L35 (%x), Revision: %02X\n",
+ devid, ret & 0xFF);
/* Set the INT Masks for critical errors */
regmap_write(cs35l35->regmap, CS35L35_INT_MASK_1,
@@ -1507,12 +1495,10 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client,
regmap_update_bits(cs35l35->regmap, CS35L35_PROTECT_CTL,
CS35L35_AMP_MUTE_MASK, 1 << CS35L35_AMP_MUTE_SHIFT);
- ret = snd_soc_register_codec(&i2c_client->dev,
- &soc_codec_dev_cs35l35, cs35l35_dai,
- ARRAY_SIZE(cs35l35_dai));
+ ret = snd_soc_register_codec(dev, &soc_codec_dev_cs35l35, cs35l35_dai,
+ ARRAY_SIZE(cs35l35_dai));
if (ret < 0) {
- dev_err(&i2c_client->dev,
- "Failed to register codec: %d\n", ret);
+ dev_err(dev, "Failed to register codec: %d\n", ret);
goto err;
}
--
2.1.4
next prev parent reply other threads:[~2017-03-08 16:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-08 16:42 [PATCH 1/5] ASoC: cs35l35: Add missing return in probe Charles Keepax
2017-03-08 16:42 ` [PATCH 2/5] ASoC: cs35l35: Add device tree binding for I2S drive configuration Charles Keepax
[not found] ` <1488991371-22513-2-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2017-03-13 16:58 ` Applied "ASoC: cs35l35: Add device tree binding for I2S drive configuration" to the asoc tree Mark Brown
2017-03-08 16:42 ` [PATCH 3/5] ASoC: cs35l35: Add for configuring drive mode in unused slots Charles Keepax
[not found] ` <1488991371-22513-3-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2017-03-13 16:58 ` Applied "ASoC: cs35l35: Add for configuring drive mode in unused slots" to the asoc tree Mark Brown
2017-03-08 16:42 ` Charles Keepax [this message]
[not found] ` <1488991371-22513-4-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2017-03-13 16:58 ` Applied "ASoC: cs35l35: Add local variable for dev in probe" " Mark Brown
2017-03-08 16:42 ` [PATCH 5/5] ASoC: cs35l35: Add IRQF_SHARED to IRQ flags Charles Keepax
[not found] ` <1488991371-22513-5-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2017-03-13 16:58 ` Applied "ASoC: cs35l35: Add IRQF_SHARED to IRQ flags" to the asoc tree Mark Brown
2017-03-08 19:55 ` [PATCH 1/5] ASoC: cs35l35: Add missing return in probe Austin, Brian
[not found] ` <1488991371-22513-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2017-03-13 16:59 ` Applied "ASoC: cs35l35: Add missing return in probe" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488991371-22513-4-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=mark.rutland@arm.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).