From: Jun Gao <jun.gao@mediatek.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
Jun Gao <jun.gao@mediatek.com>
Subject: [RESEND PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
Date: Thu, 9 Mar 2017 11:13:05 +0800 [thread overview]
Message-ID: <1489029185-21447-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1489029185-21447-1-git-send-email-jun.gao@mediatek.com>
From: Jun Gao <jun.gao@mediatek.com>
Add MT2701 i2c device node.
Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 42 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++
2 files changed, 84 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index a483798..3f5a96c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -28,7 +28,49 @@
status = "okay";
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
&pio {
+ i2c0_pins_a: i2c0@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+ <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+ <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ pins1 {
+ pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+ <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+ bias-disable;
+ };
+ };
+
spi_pins_a: spi0@0 {
pins_spi {
pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8037210..1b6157e 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -286,6 +286,48 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2701-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spi0: spi@1100a000 {
compatible = "mediatek,mt2701-spi";
#address-cells = <1>;
--
1.7.9.5
prev parent reply other threads:[~2017-03-09 3:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 3:13 [RESEND PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc Jun Gao
[not found] ` <1489029185-21447-1-git-send-email-jun.gao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-09 3:13 ` [RESEND PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding Jun Gao
2017-03-15 20:26 ` Rob Herring
2017-03-22 9:05 ` Wolfram Sang
2017-03-28 9:50 ` Jun Gao
2017-03-28 19:22 ` Wolfram Sang
2017-05-10 10:35 ` Matthias Brugger
2017-05-23 3:34 ` Jun Gao
2017-05-23 6:31 ` Matthias Brugger
2017-03-09 3:13 ` Jun Gao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489029185-21447-3-git-send-email-jun.gao@mediatek.com \
--to=jun.gao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).