From: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Felipe Balbi
<felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RESEND PATCH v3 4/8] phy: phy-mt65xx-usb3: move clock from phy node into port nodes
Date: Thu, 9 Mar 2017 16:42:35 +0800 [thread overview]
Message-ID: <1489048955.14325.13.camel@mhfsdcap03> (raw)
In-Reply-To: <58C11075.8000409-l0cyMroinI0@public.gmane.org>
On Thu, 2017-03-09 at 13:51 +0530, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Monday 06 March 2017 07:19 PM, Chunfeng Yun wrote:
> > the reference clock of HighSpeed port is 48M which comes from PLL;
> > the reference clock of SuperSpeed port is 26M which usually comes
> > from 26M oscillator directly, but some SoCs are not, add it for
> > compatibility, and put them into port node for flexibility.
>
> Won't this break the old dt compatiblity? Making change in dt is fine as long
> as older dtb's are still supported.
Ok, I'll keep it compatible in next version
Thanks a lot
>
> Thanks
> Kishon
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> > drivers/phy/phy-mt65xx-usb3.c | 21 +++++++++++----------
> > 1 file changed, 11 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> > index 7fff482..f4a3505 100644
> > --- a/drivers/phy/phy-mt65xx-usb3.c
> > +++ b/drivers/phy/phy-mt65xx-usb3.c
> > @@ -153,6 +153,7 @@ struct mt65xx_phy_pdata {
> > struct mt65xx_phy_instance {
> > struct phy *phy;
> > void __iomem *port_base;
> > + struct clk *ref_clk; /* reference clock of anolog phy */
> > u32 index;
> > u8 type;
> > };
> > @@ -160,7 +161,6 @@ struct mt65xx_phy_instance {
> > struct mt65xx_u3phy {
> > struct device *dev;
> > void __iomem *sif_base; /* only shared sif */
> > - struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
> > const struct mt65xx_phy_pdata *pdata;
> > struct mt65xx_phy_instance **phys;
> > int nphys;
> > @@ -449,9 +449,9 @@ static int mt65xx_phy_init(struct phy *phy)
> > struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
> > int ret;
> >
> > - ret = clk_prepare_enable(u3phy->u3phya_ref);
> > + ret = clk_prepare_enable(instance->ref_clk);
> > if (ret) {
> > - dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
> > + dev_err(u3phy->dev, "failed to enable ref_clk\n");
> > return ret;
> > }
> >
> > @@ -494,7 +494,7 @@ static int mt65xx_phy_exit(struct phy *phy)
> > if (instance->type == PHY_TYPE_USB2)
> > phy_instance_exit(u3phy, instance);
> >
> > - clk_disable_unprepare(u3phy->u3phya_ref);
> > + clk_disable_unprepare(instance->ref_clk);
> > return 0;
> > }
> >
> > @@ -594,12 +594,6 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
> > return PTR_ERR(u3phy->sif_base);
> > }
> >
> > - u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> > - if (IS_ERR(u3phy->u3phya_ref)) {
> > - dev_err(dev, "error to get u3phya_ref\n");
> > - return PTR_ERR(u3phy->u3phya_ref);
> > - }
> > -
> > port = 0;
> > for_each_child_of_node(np, child_np) {
> > struct mt65xx_phy_instance *instance;
> > @@ -634,6 +628,13 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
> > goto put_child;
> > }
> >
> > + instance->ref_clk = devm_clk_get(&phy->dev, "ref");
> > + if (IS_ERR(instance->ref_clk)) {
> > + dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
> > + retval = PTR_ERR(instance->ref_clk);
> > + goto put_child;
> > + }
> > +
> > instance->phy = phy;
> > instance->index = port;
> > phy_set_drvdata(phy, instance);
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-03-09 8:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-06 13:49 [RESEND PATCH v3 1/8] phy: phy-mt65xx-usb3: improve RX detection stable time Chunfeng Yun
[not found] ` <1488808169-6031-1-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-06 13:49 ` [RESEND PATCH v3 2/8] phy: phy-mt65xx-usb3: increase LFPS filter threshold Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 3/8] phy: phy-mt65xx-usb3: split SuperSpeed port into two ones Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 4/8] phy: phy-mt65xx-usb3: move clock from phy node into port nodes Chunfeng Yun
[not found] ` <1488808169-6031-4-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-09 8:21 ` Kishon Vijay Abraham I
[not found] ` <58C11075.8000409-l0cyMroinI0@public.gmane.org>
2017-03-09 8:42 ` Chunfeng Yun [this message]
2017-03-06 13:49 ` [RESEND PATCH v3 5/8] phy: phy-mt65xx-usb3: add support for new version phy Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 6/8] arm64: dts: mt8173: split usb SuperSpeed port into two ports Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 7/8] arm64: dts: mt8173: move clock from phy node into port nodes Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 8/8] dt-bindings: phy-mt65xx-usb: add support for new version phy Chunfeng Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489048955.14325.13.camel@mhfsdcap03 \
--to=chunfeng.yun-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).