From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick Menschel Subject: [PATCH 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting Date: Sun, 12 Mar 2017 14:28:09 +0100 Message-ID: <1489325291-6298-1-git-send-email-menschel.p@posteo.de> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-can-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Patrick Menschel List-Id: devicetree@vger.kernel.org The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network) controller. This patch adds the CAN core to the SoC's include files, sun4i-a10.dtsi and sun7i-a20.dtsi. On linux-can mailing list was a discussion about updating the device tree bindings https://lkml.org/lkml/2015/9/17/220 but it did not progress past writing the documentation file. Documentation/devicetree/bindings/net/can/sun4i_can.txt The CAN controller can be enabled in a board specific dts file as described in the documentation file or by using a device tree overlay. I have tested the patch on a Banana Pi (A20 SoC) with mainline kernel 4.9.13. Patrick Menschel (2): ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings arch/arm/boot/dts/sun4i-a10.dtsi | 15 +++++++++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++ 2 files changed, 30 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html