[PATCH v3 0/5] rk808: Add RK805 support

[PATCH v3 0/5] rk808: Add RK805 support

[Elaine Zhang]

change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
	      use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
	      use pm_shutdown_prepare_fn to prepare shutdown
	      and pm_pwroff_fn pull down gpio to shut down rk805
	      it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3

change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document

Elaine Zhang (5):
  mfd: rk808: fix up the chip id get failed
  linux: mfd: rk808: add rk805 regs addr and ID
  regulator: rk808: Add regulator driver for RK805
  mfd: rk808: Add RK805 support
  mfd: dt-bindings: Add RK805 device tree bindings document

 Documentation/devicetree/bindings/mfd/rk808.txt |  20 +++-
 drivers/clk/Kconfig                             |   4 +-
 drivers/mfd/Kconfig                             |   4 +-
 drivers/mfd/rk808.c                             | 143 +++++++++++++++++++++++-
 drivers/regulator/Kconfig                       |   4 +-
 drivers/regulator/rk808-regulator.c             | 130 +++++++++++++++++++++
 drivers/rtc/Kconfig                             |   4 +-
 include/linux/mfd/rk808.h                       | 120 ++++++++++++++++++++
 8 files changed, 414 insertions(+), 15 deletions(-)

-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 1/5] mfd: rk808: fix up the chip id get failed

[Elaine Zhang]

the rk8xx chip id is:
((MSB << 8) | LSB) & 0xfff0

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/mfd/rk808.c       | 21 +++++++++++++++------
 include/linux/mfd/rk808.h |  1 +
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index fd087cbb0bde..3334a2a7f3fb 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -325,7 +325,7 @@ static int rk808_probe(struct i2c_client *client,
 	void (*pm_pwroff_fn)(void);
 	int nr_pre_init_regs;
 	int nr_cells;
-	int pm_off = 0;
+	int pm_off = 0, msb, lsb;
 	int ret;
 	int i;
 
@@ -333,14 +333,23 @@ static int rk808_probe(struct i2c_client *client,
 	if (!rk808)
 		return -ENOMEM;
 
-	rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
-	if (rk808->variant < 0) {
-		dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+	/* read Chip variant */
+	msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
+	if (msb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
 			RK808_ID_MSB);
-		return rk808->variant;
+		return msb;
 	}
 
-	dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+	lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
+	if (lsb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+			RK808_ID_LSB);
+		return lsb;
+	}
+
+	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+	dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
 	case RK808_ID:
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 83701ef7d3c7..54feb140c210 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -298,6 +298,7 @@ enum rk818_reg {
 #define VOUT_LO_INT	BIT(0)
 #define CLK32KOUT2_EN	BIT(0)
 
+#define RK8XX_ID_MSK			0xfff0
 enum {
 	BUCK_ILMIN_50MA,
 	BUCK_ILMIN_100MA,
-- 
1.9.1

[PATCH v3 2/5] linux: mfd: rk808: add rk805 regs addr and ID

[Elaine Zhang]

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 include/linux/mfd/rk808.h | 119 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 54feb140c210..a133309b52f9 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -206,6 +206,96 @@ enum rk818_reg {
 #define RK818_USB_ILMIN_2000MA		0x7
 #define RK818_USB_CHG_SD_VSEL_MASK	0x70
 
+/* RK805 */
+enum rk805_reg {
+	RK805_ID_DCDC1,
+	RK805_ID_DCDC2,
+	RK805_ID_DCDC3,
+	RK805_ID_DCDC4,
+	RK805_ID_LDO1,
+	RK805_ID_LDO2,
+	RK805_ID_LDO3,
+};
+
+/* INTERRUPT REGISTER */
+#define RK805_INT_STS_REG		0x4C
+#define RK805_INT_STS_MSK_REG		0x4D
+#define RK805_GPIO_IO_POL_REG		0x50
+#define RK805_OUT_REG			0x52
+#define RK805_ON_SOURCE_REG		0xAE
+#define RK805_OFF_SOURCE_REG		0xAF
+
+/* POWER CHANNELS ENABLE REGISTER */
+#define RK805_DCDC_EN_REG		0x23
+#define RK805_SLP_DCDC_EN_REG		0x25
+#define RK805_SLP_LDO_EN_REG		0x26
+#define RK805_LDO_EN_REG		0x27
+
+/* CONFIG REGISTER */
+#define RK805_THERMAL_REG		0x22
+
+/* BUCK AND LDO CONFIG REGISTER */
+#define RK805_BUCK_LDO_SLP_LP_EN_REG	0x2A
+#define RK805_BUCK1_CONFIG_REG		0x2E
+#define RK805_BUCK1_ON_VSEL_REG		0x2F
+#define RK805_BUCK1_SLP_VSEL_REG	0x30
+#define RK805_BUCK2_CONFIG_REG		0x32
+#define RK805_BUCK2_ON_VSEL_REG		0x33
+#define RK805_BUCK2_SLP_VSEL_REG	0x34
+#define RK805_BUCK3_CONFIG_REG		0x36
+#define RK805_BUCK4_CONFIG_REG		0x37
+#define RK805_BUCK4_ON_VSEL_REG		0x38
+#define RK805_BUCK4_SLP_VSEL_REG	0x39
+#define RK805_LDO1_ON_VSEL_REG		0x3B
+#define RK805_LDO1_SLP_VSEL_REG		0x3C
+#define RK805_LDO2_ON_VSEL_REG		0x3D
+#define RK805_LDO2_SLP_VSEL_REG		0x3E
+#define RK805_LDO3_ON_VSEL_REG		0x3F
+#define RK805_LDO3_SLP_VSEL_REG		0x40
+#define RK805_OUT_REG			0x52
+#define RK805_ON_SOURCE_REG		0xAE
+#define RK805_OFF_SOURCE_REG		0xAF
+
+#define RK805_NUM_REGULATORS		7
+
+#define RK805_PWRON_FALL_RISE_INT_EN	0x0
+#define RK805_PWRON_FALL_RISE_INT_MSK	0x81
+
+/* RK805 IRQ Definitions */
+#define RK805_IRQ_PWRON_RISE		0
+#define RK805_IRQ_VB_LOW		1
+#define RK805_IRQ_PWRON			2
+#define RK805_IRQ_PWRON_LP		3
+#define RK805_IRQ_HOTDIE		4
+#define RK805_IRQ_RTC_ALARM		5
+#define RK805_IRQ_RTC_PERIOD		6
+#define RK805_IRQ_PWRON_FALL		7
+
+#define RK805_IRQ_PWRON_RISE_MSK	BIT(0)
+#define RK805_IRQ_VB_LOW_MSK		BIT(1)
+#define RK805_IRQ_PWRON_MSK		BIT(2)
+#define RK805_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK805_IRQ_HOTDIE_MSK		BIT(4)
+#define RK805_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK805_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK805_IRQ_PWRON_FALL_MSK	BIT(7)
+
+#define RK805_PWR_RISE_INT_STATUS	BIT(0)
+#define RK805_VB_LOW_INT_STATUS		BIT(1)
+#define RK805_PWRON_INT_STATUS		BIT(2)
+#define RK805_PWRON_LP_INT_STATUS	BIT(3)
+#define RK805_HOTDIE_INT_STATUS		BIT(4)
+#define RK805_ALARM_INT_STATUS		BIT(5)
+#define RK805_PERIOD_INT_STATUS		BIT(6)
+#define RK805_PWR_FALL_INT_STATUS	BIT(7)
+
+#define RK805_BUCK1_2_ILMAX_MASK	(3 << 6)
+#define RK805_BUCK3_4_ILMAX_MASK        (3 << 3)
+#define RK805_RTC_PERIOD_INT_MASK	(1 << 6)
+#define RK805_RTC_ALARM_INT_MASK	(1 << 5)
+#define RK805_INT_ALARM_EN		(1 << 3)
+#define RK805_INT_TIMER_EN		(1 << 2)
+
 /* RK808 IRQ Definitions */
 #define RK808_IRQ_VOUT_LO	0
 #define RK808_IRQ_VB_LO		1
@@ -298,7 +388,14 @@ enum rk818_reg {
 #define VOUT_LO_INT	BIT(0)
 #define CLK32KOUT2_EN	BIT(0)
 
+#define TEMP115C			0x0c
+#define TEMP_HOTDIE_MSK			0x0c
+#define SLP_SD_MSK			(0x3 << 2)
+#define SHUTDOWN_FUN			(0x2 << 2)
+#define SLEEP_FUN			(0x1 << 2)
 #define RK8XX_ID_MSK			0xfff0
+#define FPWM_MODE			BIT(7)
+
 enum {
 	BUCK_ILMIN_50MA,
 	BUCK_ILMIN_100MA,
@@ -322,6 +419,28 @@ enum {
 };
 
 enum {
+	RK805_BUCK1_2_ILMAX_2500MA,
+	RK805_BUCK1_2_ILMAX_3000MA,
+	RK805_BUCK1_2_ILMAX_3500MA,
+	RK805_BUCK1_2_ILMAX_4000MA,
+};
+
+enum {
+	RK805_BUCK3_ILMAX_1500MA,
+	RK805_BUCK3_ILMAX_2000MA,
+	RK805_BUCK3_ILMAX_2500MA,
+	RK805_BUCK3_ILMAX_3000MA,
+};
+
+enum {
+	RK805_BUCK4_ILMAX_2000MA,
+	RK805_BUCK4_ILMAX_2500MA,
+	RK805_BUCK4_ILMAX_3000MA,
+	RK805_BUCK4_ILMAX_3500MA,
+};
+
+enum {
+	RK805_ID = 0x8050,
 	RK808_ID = 0x0000,
 	RK818_ID = 0x8181,
 };
-- 
1.9.1

[PATCH v3 3/5] regulator: rk808: Add regulator driver for RK805

[Elaine Zhang]

Add support for the rk805 regulator. The regulator module consists
of 4 DCDCs, 3 LDOs.

The output voltages are configurable and are meant to supply power
to the main processor and other components.

Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 drivers/regulator/Kconfig           |   4 +-
 drivers/regulator/rk808-regulator.c | 130 ++++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index be06eb29c681..285e28051219 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -650,11 +650,11 @@ config REGULATOR_RC5T583
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RK808
-	tristate "Rockchip RK808/RK818 Power regulators"
+	tristate "Rockchip RK805/RK808/RK818 Power regulators"
 	depends on MFD_RK808
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
-	  PMIC RK808 and RK818.
+	  PMIC RK805,RK808 and RK818.
 	  This driver supports the control of different power rails of device
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index fb44d5215e30..128c81e19ee8 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -65,6 +65,27 @@
 /* max steps for increase voltage of Buck1/2, equal 100mv*/
 #define MAX_STEPS_ONE_TIME 8
 
+#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg,      \
+	_vmask, _ereg, _emask, _etime)                                  \
+	[_id] = {                                                       \
+		.name           = (_match),                             \
+		.supply_name    = (_supply),                            \
+		.of_match       = of_match_ptr(_match),                 \
+		.regulators_node = of_match_ptr("regulators"),          \
+		.type           = REGULATOR_VOLTAGE,                    \
+		.id             = (_id),                                \
+		.n_voltages     = (((_max) - (_min)) / (_step) + 1),    \
+		.owner          = THIS_MODULE,                          \
+		.min_uV         = (_min) * 1000,                        \
+		.uV_step        = (_step) * 1000,                       \
+		.vsel_reg       = (_vreg),                              \
+		.vsel_mask      = (_vmask),                             \
+		.enable_reg     = (_ereg),                              \
+		.enable_mask    = (_emask),                             \
+		.enable_time    = (_etime),                             \
+		.ops            = &rk805_reg_ops,                       \
+	}
+
 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, _etime)					\
 	[_id] = {							\
@@ -298,6 +319,28 @@ static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
 				  sel);
 }
 
+static int rk805_set_suspend_enable(struct regulator_dev *rdev)
+{
+	unsigned int reg;
+
+	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+	return regmap_update_bits(rdev->regmap, reg,
+				  rdev->desc->enable_mask,
+				  rdev->desc->enable_mask);
+}
+
+static int rk805_set_suspend_disable(struct regulator_dev *rdev)
+{
+	unsigned int reg;
+
+	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+	return regmap_update_bits(rdev->regmap, reg,
+				  rdev->desc->enable_mask,
+				  0);
+}
+
 static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 {
 	unsigned int reg;
@@ -320,6 +363,27 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 				  rdev->desc->enable_mask);
 }
 
+static struct regulator_ops rk805_reg_ops = {
+		.list_voltage           = regulator_list_voltage_linear,
+		.map_voltage            = regulator_map_voltage_linear,
+		.get_voltage_sel        = regulator_get_voltage_sel_regmap,
+		.set_voltage_sel        = regulator_set_voltage_sel_regmap,
+		.enable                 = regulator_enable_regmap,
+		.disable                = regulator_disable_regmap,
+		.is_enabled             = regulator_is_enabled_regmap,
+		.set_suspend_voltage    = rk808_set_suspend_voltage,
+		.set_suspend_enable     = rk805_set_suspend_enable,
+		.set_suspend_disable    = rk805_set_suspend_disable,
+};
+
+static struct regulator_ops rk805_switch_ops = {
+		.enable                 = regulator_enable_regmap,
+		.disable                = regulator_disable_regmap,
+		.is_enabled             = regulator_is_enabled_regmap,
+		.set_suspend_enable     = rk805_set_suspend_enable,
+		.set_suspend_disable    = rk805_set_suspend_disable,
+};
+
 static struct regulator_ops rk808_buck1_2_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@@ -369,6 +433,68 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };
 
+static const struct regulator_desc rk805_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC1,
+		.ops = &rk805_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(0),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC2,
+		.ops = &rk805_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(1),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC3,
+		.ops = &rk805_switch_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(2),
+		.owner = THIS_MODULE,
+	},
+
+	RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
+		RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+		RK805_DCDC_EN_REG, BIT(3), 0),
+
+	RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
+		RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(0), 400),
+	RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
+		RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(1), 400),
+	RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
+		RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(2), 400),
+};
+
 static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
@@ -625,6 +751,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pdata);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		regulators = rk805_reg;
+		nregulators = RK805_NUM_REGULATORS;
+		break;
 	case RK808_ID:
 		regulators = rk808_reg;
 		nregulators = RK808_NUM_REGULATORS;
-- 
1.9.1

[PATCH v3 5/5] mfd: dt-bindings: Add RK805 device tree bindings document

[Elaine Zhang]

Add device tree bindings documentation for Rockchip's RK805 PMIC.

Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/rk808.txt | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9636ae8d8d41..05eb07134483 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,11 +1,12 @@
 RK8XX Power Management Integrated Circuit
 
 The rk8xx family current members:
+rk805
 rk808
 rk818
 
 Required properties:
-- compatible: "rockchip,rk808", "rockchip,rk818"
+- compatible: "rockchip,rk805", "rockchip,rk808", "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -18,6 +19,14 @@ Optional properties:
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
 
+Optional RK805 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc6-supply:  The input supply for LDO_REG3
+
 Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
@@ -56,6 +65,15 @@ by a child node of the 'regulators' node.
 		/* standard regulator bindings here */
 	};
 
+Following regulators of the RK805 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK805 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 3
+
 Following regulators of the RK808 PMIC block are supported. Note that
 the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
 number as described in RK808 datasheet.
-- 
1.9.1

[PATCH v3 4/5] mfd: rk808: Add RK805 support

[Elaine Zhang]

The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

    - Regulators
    - RTC
    - Clocking

Both RK808 and RK805 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/clk/Kconfig |   4 +-
 drivers/mfd/Kconfig |   4 +-
 drivers/mfd/rk808.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/rtc/Kconfig |   4 +-
 4 files changed, 128 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9356ab4b7d76..7ca8f02a1232 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -39,10 +39,10 @@ config COMMON_CLK_MAX77686
 	  clock.
 
 config COMMON_CLK_RK808
-	tristate "Clock driver for RK808/RK818"
+	tristate "Clock driver for RK805/RK808/RK818"
 	depends on MFD_RK808
 	---help---
-	  This driver supports RK808 and RK818 crystal oscillator clock. These
+	  This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
 	  multi-function devices have two fixed-rate oscillators,
 	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
 	  by control register.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb74d31..b410a348b756 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -892,13 +892,13 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK808/RK818 Power Management Chip"
+	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK808 and RK818
+	  If you say yes here you get support for the RK805, RK808 and RK818
 	  Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 3334a2a7f3fb..fdd4449b14b0 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -70,6 +70,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	.volatile_reg = rk808_is_volatile_reg,
 };
 
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
 static const struct regmap_config rk808_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -86,6 +94,16 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	}
 };
 
+static const struct mfd_cell rk805s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -106,6 +124,20 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	},
 };
 
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+	{RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK3_ILMAX_3000MA},
+	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK4_ILMAX_3500MA},
+	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+	{RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -135,6 +167,41 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct regmap_irq rk805_irqs[] = {
+	[RK805_IRQ_PWRON_RISE] = {
+		.mask = RK805_IRQ_PWRON_RISE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_VB_LOW] = {
+		.mask = RK805_IRQ_VB_LOW_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON] = {
+		.mask = RK805_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_LP] = {
+		.mask = RK805_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_HOTDIE] = {
+		.mask = RK805_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_ALARM] = {
+		.mask = RK805_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_PERIOD] = {
+		.mask = RK805_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_FALL] = {
+		.mask = RK805_IRQ_PWRON_FALL_MSK,
+		.reg_offset = 0,
+	},
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +314,17 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	},
 };
 
+static struct regmap_irq_chip rk805_irq_chip = {
+	.name = "rk805",
+	.irqs = rk805_irqs,
+	.num_irqs = ARRAY_SIZE(rk805_irqs),
+	.num_regs = 1,
+	.status_base = RK805_INT_STS_REG,
+	.mask_base = RK805_INT_STS_MSK_REG,
+	.ack_base = RK805_INT_STS_REG,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -272,6 +350,38 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 };
 
 static struct i2c_client *rk808_i2c_client;
+
+static void rk805_shutdown_prepare(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk808, so do nothing here\n");
+		return;
+	}
+
+	/* close rtc int when power off */
+	regmap_update_bits(rk808->regmap,
+			   RK808_INT_STS_MSK_REG1,
+			   RK805_RTC_PERIOD_INT_MASK |
+			   RK805_RTC_ALARM_INT_MASK,
+			   RK805_RTC_PERIOD_INT_MASK |
+			   RK805_RTC_ALARM_INT_MASK);
+	regmap_update_bits(rk808->regmap,
+			   RK808_RTC_INT_REG,
+			   RK805_INT_ALARM_EN | RK805_INT_TIMER_EN,
+			   0);
+
+	/* pmic sleep shutdown function */
+	ret = regmap_update_bits(rk808->regmap,
+				 RK805_GPIO_IO_POL_REG,
+				 SLP_SD_MSK, SHUTDOWN_FUN);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
 static void rk808_device_shutdown(void)
 {
 	int ret;
@@ -309,6 +419,7 @@ static void rk818_device_shutdown(void)
 }
 
 static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
 	{ .compatible = "rockchip,rk818" },
 	{ },
@@ -323,6 +434,7 @@ static int rk808_probe(struct i2c_client *client,
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
 	void (*pm_pwroff_fn)(void);
+	void (*pm_shutdown_prepare_fn)(void);
 	int nr_pre_init_regs;
 	int nr_cells;
 	int pm_off = 0, msb, lsb;
@@ -352,6 +464,15 @@ static int rk808_probe(struct i2c_client *client,
 	dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		rk808->regmap_cfg = &rk805_regmap_config;
+		rk808->regmap_irq_chip = &rk805_irq_chip;
+		pre_init_reg = rk805_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+		cells = rk805s;
+		nr_cells = ARRAY_SIZE(rk805s);
+		pm_shutdown_prepare_fn = rk805_shutdown_prepare;
+		break;
 	case RK808_ID:
 		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -444,6 +565,7 @@ static int rk808_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id rk808_ids[] = {
+	{ "rk805" },
 	{ "rk808" },
 	{ "rk818" },
 	{ },
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5dc673dc9487..47d6a8df06db 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -352,11 +352,11 @@ config RTC_DRV_MAX77686
 	  will be called rtc-max77686.
 
 config RTC_DRV_RK808
-	tristate "Rockchip RK808/RK818 RTC"
+	tristate "Rockchip RK805/RK808/RK818 RTC"
 	depends on MFD_RK808
 	help
 	  If you say yes here you will get support for the
-	  RTC of RK808 and RK818 PMIC.
+	  RTC of RK805, RK808 and RK818 PMIC.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rk808-rtc.
-- 
1.9.1

Re: [PATCH v3 4/5] mfd: rk808: Add RK805 support

[Lee Jones]

On Thu, 16 Mar 2017, Elaine Zhang wrote:

> The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
> devices. It contains the following components:
> 
>     - Regulators
>     - RTC
>     - Clocking
> 
> Both RK808 and RK805 chips are using a similar register map,
> so we can reuse the RTC and Clocking functionality.
> 
> Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>  drivers/clk/Kconfig |   4 +-
>  drivers/mfd/Kconfig |   4 +-
>  drivers/mfd/rk808.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/rtc/Kconfig |   4 +-
>  4 files changed, 128 insertions(+), 6 deletions(-)

Did you see my review of this patch already?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html