From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v2 1/4] arm64: dts: r8a7795: Add reset control properties
Date: Thu, 16 Mar 2017 15:07:23 +0100 [thread overview]
Message-ID: <1489673246-11015-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1489673246-11015-1-git-send-email-geert+renesas@glider.be>
Add properties to describe the reset topology for on-SoC devices:
- Add the "#reset-cells" property to the CPG/MSSR device node,
- Add resets and reset-names properties to the various device nodes.
This allows to reset SoC devices using the Reset Controller API.
Note that all resets added match the corresponding module clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- Postpone adding resets and reset-names properties for complex
devices (du, rcar_sound),
- Add reset properties to recently added device nodes (i2c_dvfs,
tsc).
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 93 ++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 55c09f1b89c94785..63598c237c187364 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -204,6 +204,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
wdt0: watchdog@e6020000 {
@@ -211,6 +212,7 @@
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
status = "disabled";
};
@@ -226,6 +228,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
@@ -240,6 +243,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
@@ -254,6 +258,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
@@ -268,6 +273,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
@@ -282,6 +288,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
@@ -296,6 +303,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
@@ -310,6 +318,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio@e6055800 {
@@ -324,6 +333,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pmu_a57 {
@@ -369,6 +379,7 @@
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller@e6160000 {
@@ -405,6 +416,7 @@
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
@@ -436,6 +448,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -469,6 +482,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -502,6 +516,7 @@
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -535,6 +550,7 @@
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -568,6 +584,7 @@
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -610,6 +627,7 @@
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
phy-mode = "rgmii-txid";
#address-cells = <1>;
#size-cells = <0>;
@@ -628,6 +646,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -643,6 +662,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -659,6 +679,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
status = "disabled";
channel0 {
@@ -683,6 +704,7 @@
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
status = "disabled";
};
@@ -699,6 +721,7 @@
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
status = "disabled";
};
@@ -715,6 +738,7 @@
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
status = "disabled";
};
@@ -731,6 +755,7 @@
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
status = "disabled";
};
@@ -747,6 +772,7 @@
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
status = "disabled";
};
@@ -762,6 +788,7 @@
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -777,6 +804,7 @@
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -792,6 +820,7 @@
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
status = "disabled";
};
@@ -807,6 +836,7 @@
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -822,6 +852,7 @@
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -837,6 +868,7 @@
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -850,6 +882,7 @@
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -862,6 +895,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -877,6 +911,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -892,6 +927,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -907,6 +943,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -922,6 +959,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -937,6 +975,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -952,6 +991,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -963,6 +1003,7 @@
reg = <0 0xe6e30000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -972,6 +1013,7 @@
reg = <0 0xe6e31000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -981,6 +1023,7 @@
reg = <0 0xe6e32000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -990,6 +1033,7 @@
reg = <0 0xe6e33000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -999,6 +1043,7 @@
reg = <0 0xe6e34000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -1008,6 +1053,7 @@
reg = <0 0xe6e35000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -1017,6 +1063,7 @@
reg = <0 0xe6e36000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
@@ -1213,6 +1260,7 @@
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
status = "disabled";
};
@@ -1222,6 +1270,7 @@
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
status = "disabled";
};
@@ -1231,6 +1280,7 @@
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 327>;
status = "disabled";
};
@@ -1243,6 +1293,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1256,6 +1307,7 @@
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1267,6 +1319,7 @@
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -1277,6 +1330,7 @@
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -1287,6 +1341,7 @@
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -1297,6 +1352,7 @@
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -1307,6 +1363,7 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1317,6 +1374,7 @@
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1327,6 +1385,7 @@
reg = <0 0xee0c0200 0 0x700>;
clocks = <&cpg CPG_MOD 701>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1339,6 +1398,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
};
@@ -1350,6 +1410,7 @@
phys = <&usb2_phy1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
};
@@ -1361,6 +1422,7 @@
phys = <&usb2_phy2>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
status = "disabled";
};
@@ -1372,6 +1434,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
status = "disabled";
};
@@ -1383,6 +1446,7 @@
phys = <&usb2_phy1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
status = "disabled";
};
@@ -1394,6 +1458,7 @@
phys = <&usb2_phy2>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 701>;
status = "disabled";
};
@@ -1410,6 +1475,7 @@
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
status = "disabled";
};
@@ -1436,6 +1502,7 @@
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
};
@@ -1462,6 +1529,7 @@
clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
status = "disabled";
};
@@ -1471,6 +1539,7 @@
interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 624>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 624>;
renesas,fcp = <&fcpvb1>;
};
@@ -1480,6 +1549,7 @@
reg = <0 0xfe92f000 0 0x200>;
clocks = <&cpg CPG_MOD 606>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 606>;
};
fcpf0: fcp@fe950000 {
@@ -1487,6 +1557,7 @@
reg = <0 0xfe950000 0 0x200>;
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 615>;
};
fcpf1: fcp@fe951000 {
@@ -1494,6 +1565,7 @@
reg = <0 0xfe951000 0 0x200>;
clocks = <&cpg CPG_MOD 614>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 614>;
};
fcpf2: fcp@fe952000 {
@@ -1501,6 +1573,7 @@
reg = <0 0xfe952000 0 0x200>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 613>;
};
vspbd: vsp@fe960000 {
@@ -1509,6 +1582,7 @@
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 626>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 626>;
renesas,fcp = <&fcpvb0>;
};
@@ -1518,6 +1592,7 @@
reg = <0 0xfe96f000 0 0x200>;
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 607>;
};
vspi0: vsp@fe9a0000 {
@@ -1526,6 +1601,7 @@
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 631>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 631>;
renesas,fcp = <&fcpvi0>;
};
@@ -1535,6 +1611,7 @@
reg = <0 0xfe9af000 0 0x200>;
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 611>;
};
vspi1: vsp@fe9b0000 {
@@ -1543,6 +1620,7 @@
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 630>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 630>;
renesas,fcp = <&fcpvi1>;
};
@@ -1552,6 +1630,7 @@
reg = <0 0xfe9bf000 0 0x200>;
clocks = <&cpg CPG_MOD 610>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 610>;
};
vspi2: vsp@fe9c0000 {
@@ -1560,6 +1639,7 @@
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 629>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 629>;
renesas,fcp = <&fcpvi2>;
};
@@ -1569,6 +1649,7 @@
reg = <0 0xfe9cf000 0 0x200>;
clocks = <&cpg CPG_MOD 609>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 609>;
};
vspd0: vsp@fea20000 {
@@ -1577,6 +1658,7 @@
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 623>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
renesas,fcp = <&fcpvd0>;
};
@@ -1586,6 +1668,7 @@
reg = <0 0xfea27000 0 0x200>;
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
};
vspd1: vsp@fea28000 {
@@ -1594,6 +1677,7 @@
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 622>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
renesas,fcp = <&fcpvd1>;
};
@@ -1603,6 +1687,7 @@
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
};
vspd2: vsp@fea30000 {
@@ -1611,6 +1696,7 @@
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 621>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
renesas,fcp = <&fcpvd2>;
};
@@ -1620,6 +1706,7 @@
reg = <0 0xfea37000 0 0x200>;
clocks = <&cpg CPG_MOD 601>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 601>;
};
vspd3: vsp@fea38000 {
@@ -1628,6 +1715,7 @@
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 620>;
renesas,fcp = <&fcpvd3>;
};
@@ -1637,6 +1725,7 @@
reg = <0 0xfea3f000 0 0x200>;
clocks = <&cpg CPG_MOD 600>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 600>;
};
fdp1@fe940000 {
@@ -1645,6 +1734,7 @@
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 119>;
renesas,fcp = <&fcpf0>;
};
@@ -1654,6 +1744,7 @@
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 118>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 118>;
renesas,fcp = <&fcpf1>;
};
@@ -1663,6 +1754,7 @@
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 117>;
power-domains = <&sysc R8A7795_PD_A3VP>;
+ resets = <&cpg 117>;
renesas,fcp = <&fcpf2>;
};
@@ -1722,6 +1814,7 @@
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
status = "okay";
};
--
2.7.4
next prev parent reply other threads:[~2017-03-16 14:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-16 14:07 [PATCH v2 0/4] arm: renesas: Add reset control properties Geert Uytterhoeven
2017-03-16 14:07 ` Geert Uytterhoeven [this message]
[not found] ` <1489673246-11015-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2017-03-16 14:07 ` [PATCH v2 2/4] arm64: dts: r8a7796: " Geert Uytterhoeven
2017-03-16 14:07 ` [PATCH v2 3/4] ARM: dts: r8a7743: " Geert Uytterhoeven
2017-03-16 14:07 ` [PATCH v2 4/4] ARM: dts: r8a7745: " Geert Uytterhoeven
2017-03-20 8:28 ` [PATCH v2 0/4] arm: renesas: " Simon Horman
2017-03-20 9:31 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUdFUBh=2azMLWJ1Bm34pP3OnesqdvR1ZQ14JgMtuqecw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-03-21 8:20 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489673246-11015-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).