From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Mason Subject: [PATCH] arm64: dts: NS2: Add dma-coherent to relevant DT entries Date: Tue, 21 Mar 2017 16:51:19 -0400 Message-ID: <1490129479-19459-1-git-send-email-jon.mason@broadcom.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Florian Fainelli , Rob Herring , Mark Rutland Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org List-Id: devicetree@vger.kernel.org Cache related issues with DMA rings and performance issues related to caching are being caused by not properly setting the "dma-coherent" flag in the device tree entries. Adding it here to correct the issue. Signed-off-by: Jon Mason Fixes: fd5e5dd56 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Fixes: dddc3c9d7 ("arm64: dts: NS2: add AMAC ethernet support") Fixes: e79249143 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver") Fixes: ac9aae00f ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Fixes: efc877676 ("arm64: dts: Add SDHCI DT node for NS2") --- arch/arm64/boot/dts/broadcom/ns2.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index b8503fc..35a309a 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -114,6 +114,7 @@ pcie0: pcie@20020000 { compatible = "brcm,iproc-pcie"; reg = <0 0x20020000 0 0x1000>; + dma-coherent; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -144,6 +145,7 @@ pcie4: pcie@50020000 { compatible = "brcm,iproc-pcie"; reg = <0 0x50020000 0 0x1000>; + dma-coherent; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -174,6 +176,7 @@ pcie8: pcie@60c00000 { compatible = "brcm,iproc-pcie-paxc"; reg = <0 0x60c00000 0 0x1000>; + dma-coherent; linux,pci-domain = <8>; bus-range = <0x0 0x1>; @@ -203,6 +206,7 @@ <0x61030000 0x100>; reg-names = "amac_base", "idm_base", "nicpm_base"; interrupts = ; + dma-coherent; phy-handle = <&gphy0>; phy-mode = "rgmii"; status = "disabled"; @@ -213,6 +217,7 @@ reg = <0x612c0000 0x445>; /* PDC FS0 regs */ interrupts = ; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -228,6 +233,7 @@ reg = <0x612e0000 0x445>; /* PDC FS1 regs */ interrupts = ; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -243,6 +249,7 @@ reg = <0x61300000 0x445>; /* PDC FS2 regs */ interrupts = ; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -258,6 +265,7 @@ reg = <0x61320000 0x445>; /* PDC FS3 regs */ interrupts = ; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -668,6 +676,7 @@ sata: ahci@663f2000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x663f2000 0x1000>; + dma-coherent; reg-names = "ahci"; interrupts = ; #address-cells = <1>; @@ -691,6 +700,7 @@ compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x66420000 0x100>; interrupts = ; + dma-coherent; bus-width = <8>; clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; status = "disabled"; @@ -700,6 +710,7 @@ compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x66430000 0x100>; interrupts = ; + dma-coherent; bus-width = <8>; clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; status = "disabled"; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html