From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Wolfram Sang <wsa@sang-engineering.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH/RFC v2 0/2] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Date: Fri, 24 Mar 2017 14:37:43 +0100 [thread overview]
Message-ID: <1490362665-4422-1-git-send-email-geert+renesas@glider.be> (raw)
Hi all,
This patch series adds preliminary support for Renesas Salvator-X
development boards equipped with revision ES2.0 of the R-Car H3 Soc.
- Patch 1 adds support for the R-Car H3 ES2.0 Soc,
While this patch is safe as-is, as it doesn't affect any existing
setups, it's probably a bit premature to apply it.
- Patch 2 adds support for Salvator-X boards with R-Car H3 ES2.0.
This patch does affect existing development setups, as it changes the
name of the DTB for Salvator-X boards equipped with ES1.x SoCs.
Given most developers have access to ES1.x only, this patch must not be
applied yet.
Note that for now, it is assumed that all H3ULCB boards are equipped with
R-Car H3 ES1.x.
For changes compared to v1 (which was not posted), please refer to the
individual patches.
Dependencies:
- renesas-devel-20170324-v4.11-rc3,
- [PATCH v2 0/4] clk: renesas: Add support for R-Car H3 ES2.0,
- [PATCH v2 0/4] pinctrl: sh-pfc: Add support for R-Car H3 ES2.0,
- [PATCH 0/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0.
To do:
- Reduce duplication by sharing Salvator-X board description.
For testers, this series is available in the topic/r8a7795es2-dt-v2 branch
of my renesas-drivers git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.
An integration branch (incl. all dependencies) for testing is provided as
topic/r8a7795es2-integration. I plan to update this branch when any of the
dependencies are updated.
This has been tested on Salvator-X with R-Car H3 ES1.0 and ES2.0 SoCs.
Thanks for your comments!
Geert Uytterhoeven (2):
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0
arch/arm64/boot/dts/renesas/Makefile | 1 +
...5-salvator-x.dts => r8a7795-es1-salvator-x.dts} | 4 +-
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 83 ++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +-
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 +-
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 70 +-----------------
6 files changed, 90 insertions(+), 74 deletions(-)
copy arch/arm64/boot/dts/renesas/{r8a7795-salvator-x.dts => r8a7795-es1-salvator-x.dts} (99%)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
--
2.7.4
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2017-03-24 13:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-24 13:37 Geert Uytterhoeven [this message]
[not found] ` <1490362665-4422-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2017-03-24 13:37 ` [PATCH/RFC v2 1/2] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 Geert Uytterhoeven
2017-03-27 8:48 ` Laurent Pinchart
2017-03-29 8:13 ` Simon Horman
2017-03-29 8:31 ` Geert Uytterhoeven
2017-03-29 8:45 ` Simon Horman
2017-04-20 9:36 ` Geert Uytterhoeven
2017-04-20 10:42 ` Laurent Pinchart
2017-04-20 10:55 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWmvhZjxKfEdGJ3d_w0d2s2kK+8iW1tsEM584qZc+dVEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-20 11:24 ` Laurent Pinchart
2017-04-20 11:36 ` Geert Uytterhoeven
2017-03-24 13:37 ` [PATCH/RFC v2 2/2] arm64: dts: r8a7795: salvator-x: " Geert Uytterhoeven
2017-03-30 10:48 ` [PATCH/RFC v2 0/2] arm64: dts: r8a7795: " Sjoerd Simons
[not found] ` <1490870898.3471.3.camel-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2017-03-30 11:13 ` Geert Uytterhoeven
2017-03-30 11:50 ` Sjoerd Simons
2017-03-30 12:08 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490362665-4422-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wsa@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).