From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Subject: [PATCH v2 13/15] ARM: dts: imx6dl-icore: Add touchscreen node Date: Fri, 24 Mar 2017 21:48:48 +0530 Message-ID: <1490372330-5611-14-git-send-email-jagan@openedev.com> References: <1490372330-5611-1-git-send-email-jagan@openedev.com> Return-path: In-Reply-To: <1490372330-5611-1-git-send-email-jagan@openedev.com> Sender: linux-kernel-owner@vger.kernel.org To: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sascha Hauer , Fabio Estevam , Matteo Lisi , Michael Trimarchi , Jagan Teki List-Id: devicetree@vger.kernel.org From: Jagan Teki max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is connected via i2c1, so add max11801: touchscreen@48 on i2c1. Cc: Shawn Guo Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki --- Changes for v2: - none arch/arm/boot/dts/imx6dl-icore.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index ea9ab05..27f37cd 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -58,6 +58,15 @@ status = "okay"; }; +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &i2c3 { sgtl5000: codec@a { compatible = "fsl,sgtl5000"; -- 1.9.1