From: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
gregkh@linuxfoundation.org, catalin.marinas@arm.com,
will.deacon@arm.com, arnd@arndb.de
Cc: mathieu.poirier@linaro.org, orson.zhai@spreadtrum.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, zhang.lyra@gmail.com,
chunyan.zhang@spreadtrum.com
Subject: [PATCH V5 0/4] Add Spreadtrum SP9860G support
Date: Mon, 27 Mar 2017 14:06:38 +0800 [thread overview]
Message-ID: <1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com> (raw)
SC9860 is a Spreadtrum SoC with eight Cortex A53, which are divided
into 4 Big cores and 4 little cores.
This patch-set provides a basic configuration for SC9860 in device tree
to make it run to console. After this we will continue to submit other
device drivers step by step, which are using on most of Spreadtrum's SoCs.
Changes from v4:
* Addressed Rob's comments
use serial@0 instead of serial@000000;
* Added Rob's Acked-by on patch 2/4 and 3/4.
Changes from v3:
* Rebased v4.11-rc2;
* Added Reviewed-by of Mathieu;
* Addressed Rob's comments:
- Documented sprd serial competible according to Rob's suggestion
- Revised serial node name to match its offset;
* Added STM device node in dt.
Changes from v2:
* Addressed comments from Mathieu:
- Removed CoreSight devices' lables from DT;
- Added another level of imbrication for ETFs which have more than one port;
* Addressed comments from Rob:
- Switched to use SPDX-License-Identifier tag instead;
- Moved the 26m fixed clock node to top level in DT;
- Splited the patch into two, since they were revising two dt-bindings;
- Removed redundant space from sprd-usrt.txt;
- Removed useless property from the sprd_uart example of DT configuration.
Changes from v1:
* Removed useless idle-state node 'deep_sleep' from DT
* Removed useless property 'sc-id' from DT
* Removed 'clock-frequency' property from the node 'timer'
* Added another compatible string '"arm,cortex-a53-pmu"' and property
'interrupt-affinity' for pmu
* Kept using the existed compatible string of sprd_serial driver, and added
a new one for sc9860 in DT.
Thanks,
Chunyan
Chunyan Zhang (2):
dt-bindings: arm: Add bindings for SP9860G
dt-bindings: serial: add a new compatible string for SC9860
Orson Zhai (1):
arm64: dts: Add basic DT to support Spreadtrum's SP9860G
Wei Qiao (1):
serial: sprd: adjust TIMEOUT to a big value
Documentation/devicetree/bindings/arm/sprd.txt | 13 +-
.../devicetree/bindings/serial/sprd-uart.txt | 14 +-
arch/arm64/boot/dts/sprd/Makefile | 3 +-
arch/arm64/boot/dts/sprd/sc9860.dtsi | 569 +++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 ++
arch/arm64/boot/dts/sprd/whale2.dtsi | 71 +++
drivers/tty/serial/sprd_serial.c | 2 +-
7 files changed, 720 insertions(+), 8 deletions(-)
create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi
--
2.7.4
next reply other threads:[~2017-03-27 6:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-27 6:06 Chunyan Zhang [this message]
2017-03-27 6:06 ` [PATCH V5 1/4] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Chunyan Zhang
2017-03-27 6:06 ` [PATCH V5 2/4] dt-bindings: arm: Add bindings for SP9860G Chunyan Zhang
[not found] ` <1490594802-27073-3-git-send-email-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-04-06 10:00 ` Chunyan Zhang
2017-03-27 6:06 ` [PATCH V5 3/4] dt-bindings: serial: add a new compatible string for SC9860 Chunyan Zhang
2017-03-27 6:06 ` [PATCH V5 4/4] serial: sprd: adjust TIMEOUT to a big value Chunyan Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com \
--to=chunyan.zhang@spreadtrum.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=orson.zhai@spreadtrum.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).