[PATCH V5 0/4] Add Spreadtrum SP9860G support

[PATCH V5 0/4] Add Spreadtrum SP9860G support

[Chunyan Zhang]

SC9860 is a Spreadtrum SoC with eight Cortex A53, which are divided
into 4 Big cores and 4 little cores.

This patch-set provides a basic configuration for SC9860 in device tree
to make it run to console.  After this we will continue to submit other
device drivers step by step, which are using on most of Spreadtrum's SoCs.

Changes from v4:
* Addressed Rob's comments
  use serial@0 instead of serial@000000;
* Added Rob's Acked-by on patch 2/4 and 3/4.

Changes from v3:
* Rebased v4.11-rc2;
* Added Reviewed-by of Mathieu;
* Addressed Rob's comments:
  - Documented sprd serial competible according to Rob's suggestion
  - Revised serial node name to match its offset;
* Added STM device node in dt.

Changes from v2:
* Addressed comments from Mathieu:
  - Removed CoreSight devices' lables from DT;
  - Added another level of imbrication for ETFs which have more than one port;
* Addressed comments from Rob:
  - Switched to use SPDX-License-Identifier tag instead;
  - Moved the 26m fixed clock node to top level in DT;
  - Splited the patch into two, since they were revising two dt-bindings;
  - Removed redundant space from sprd-usrt.txt;
  - Removed useless property from the sprd_uart example of DT configuration.

Changes from v1:
* Removed useless idle-state node 'deep_sleep' from DT
* Removed useless property 'sc-id' from DT
* Removed 'clock-frequency' property from the node 'timer'
* Added another compatible string '"arm,cortex-a53-pmu"' and property
  'interrupt-affinity' for pmu
* Kept using the existed compatible string of sprd_serial driver, and added
  a new one for sc9860 in DT.

Thanks,
Chunyan


Chunyan Zhang (2):
  dt-bindings: arm: Add bindings for SP9860G
  dt-bindings: serial: add a new compatible string for SC9860

Orson Zhai (1):
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G

Wei Qiao (1):
  serial: sprd: adjust TIMEOUT to a big value

 Documentation/devicetree/bindings/arm/sprd.txt     |  13 +-
 .../devicetree/bindings/serial/sprd-uart.txt       |  14 +-
 arch/arm64/boot/dts/sprd/Makefile                  |   3 +-
 arch/arm64/boot/dts/sprd/sc9860.dtsi               | 569 +++++++++++++++++++++
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts          |  56 ++
 arch/arm64/boot/dts/sprd/whale2.dtsi               |  71 +++
 drivers/tty/serial/sprd_serial.c                   |   2 +-
 7 files changed, 720 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
 create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi

-- 
2.7.4

[PATCH V5 1/4] arm64: dts: Add basic DT to support Spreadtrum's SP9860G

[Chunyan Zhang]

From: Orson Zhai <orson.zhai@spreadtrum.com>

SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.

According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
and sp9860g dts is for the board level.

Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 arch/arm64/boot/dts/sprd/Makefile         |   3 +-
 arch/arm64/boot/dts/sprd/sc9860.dtsi      | 569 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |  56 +++
 arch/arm64/boot/dts/sprd/whale2.dtsi      |  71 ++++
 4 files changed, 698 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
 create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi

diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index b658c5e..f0535e6 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
+dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
+			sp9860g-1h10.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
new file mode 100644
index 0000000..cf72728
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -0,0 +1,569 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "whale2.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@530000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU1: cpu@530001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU2: cpu@530002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530002>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU3: cpu@530003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530003>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU4: cpu@530100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU5: cpu@530101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU6: cpu@530102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU7: cpu@530103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x530103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+	};
+
+	idle-states{
+		entry-method = "arm,psci";
+
+		CORE_PD: core_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <700>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010002>;
+		};
+
+		CLUSTER_PD: cluster_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x01010003>;
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+					| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+
+	soc {
+		funnel@10001000 { /* SoC Funnel */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					soc_funnel_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					soc_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint =
+						<&main_funnel_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					soc_funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpioint =
+							<&stm_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			port {
+				etb_in: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&soc_funnel_out_port>;
+				};
+			};
+		};
+
+		stm@10006000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x10006000 0 0x1000>,
+			      <0 0x01000000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			port {
+				stm_out_port: endpoint {
+					remote-endpoint =
+						<&soc_funnel_in_port1>;
+				};
+			};
+		};
+
+		funnel@11001000 { /* Cluster0 Funnel */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					cluster0_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					cluster0_funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@3 {
+					reg = <2>;
+					cluster0_funnel_in_port2: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					cluster0_funnel_in_port3: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		funnel@11002000 { /* Cluster1 Funnel */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					cluster1_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					cluster1_funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@3 {
+					reg = <2>;
+					cluster1_funnel_in_port2: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@4 {
+					reg = <3>;
+					cluster1_funnel_in_port3: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@11003000 { /*  ETF on Cluster0 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					cluster0_etf_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+						<&cluster0_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@11004000 { /* ETF on Cluster1 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port1>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					cluster1_etf_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+						<&cluster1_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@11005000 { /* Main Funnel */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0x11005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					main_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					main_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					main_funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@11440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11440000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm0_out: endpoint {
+					remote-endpoint =
+						<&cluster0_funnel_in_port0>;
+				};
+			};
+		};
+
+		etm@11540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11540000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm1_out: endpoint {
+					remote-endpoint =
+						<&cluster0_funnel_in_port1>;
+				};
+			};
+		};
+
+		etm@11640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11640000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm2_out: endpoint {
+					remote-endpoint =
+						<&cluster0_funnel_in_port2>;
+				};
+			};
+		};
+
+		etm@11740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11740000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm3_out: endpoint {
+					remote-endpoint =
+						<&cluster0_funnel_in_port3>;
+				};
+			};
+		};
+
+		etm@11840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11840000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm4_out: endpoint {
+					remote-endpoint =
+						<&cluster1_funnel_in_port0>;
+				};
+			};
+		};
+
+		etm@11940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11940000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm5_out: endpoint {
+					remote-endpoint =
+						<&cluster1_funnel_in_port1>;
+				};
+			};
+		};
+
+		etm@11a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11a40000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm6_out: endpoint {
+					remote-endpoint =
+						<&cluster1_funnel_in_port2>;
+				};
+			};
+		};
+
+		etm@11b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11b40000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			port {
+				etm7_out: endpoint {
+					remote-endpoint =
+						<&cluster1_funnel_in_port3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
new file mode 100644
index 0000000..ae0b28c
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -0,0 +1,56 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+
+/ {
+	model = "Spreadtrum SP9860G 3GFHD Board";
+
+	compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+	aliases {
+		serial0 = &uart0; /* for Bluetooth */
+		serial1 = &uart1; /* UART console */
+		serial2 = &uart2; /* Reserved */
+		serial3 = &uart3; /* for GPS */
+	};
+
+	memory{
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x60000000>,
+		      <0x1 0x80000000 0 0x60000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
new file mode 100644
index 0000000..7c217c5
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext_26m";
+	};
+};
-- 
2.7.4

[PATCH V5 2/4] dt-bindings: arm: Add bindings for SP9860G

[Chunyan Zhang]

Added bindings for Spreadtrum SP9860G board and SC9860 SoC.
This patch also revised bindings of SC9836 to make the format
more clear.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/sprd.txt | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
index 31a629d..3df034b 100644
--- a/Documentation/devicetree/bindings/arm/sprd.txt
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -1,11 +1,14 @@
 Spreadtrum SoC Platforms Device Tree Bindings
 ----------------------------------------------------
 
-Sharkl64 is a Spreadtrum's SoC Platform which is based
-on ARM 64-bit processor.
+SC9836 openphone Board
+Required root node properties:
+	- compatible = "sprd,sc9836-openphone", "sprd,sc9836";
 
-SC9836 openphone board with SC9836 SoC based on the
-Sharkl64 Platform shall have the following properties.
+SC9860 SoC
+Required root node properties:
+	- compatible = "sprd,sc9860"
 
+SP9860G 3GFHD Board
 Required root node properties:
-        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+	- compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
-- 
2.7.4

[PATCH V5 3/4] dt-bindings: serial: add a new compatible string for SC9860

[Chunyan Zhang]

SC9860 use the same serial device which SC9836 uses, so added a new
compatible string to support SC9860 as well, also added an example
of how to describe this serial device in DT.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/serial/sprd-uart.txt | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
index 2aff0f2..cab40f0 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -1,7 +1,19 @@
 * Spreadtrum serial UART
 
 Required properties:
-- compatible: must be "sprd,sc9836-uart"
+- compatible: must be one of:
+  * "sprd,sc9836-uart"
+  * "sprd,sc9860-uart", "sprd,sc9836-uart"
+
 - reg: offset and length of the register set for the device
 - interrupts: exactly one interrupt specifier
 - clocks: phandles to input clocks.
+
+Example:
+	uart0: serial@0 {
+		compatible = "sprd,sc9860-uart",
+			     "sprd,sc9836-uart";
+		reg = <0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&ext_26m>;
+	};
-- 
2.7.4

[PATCH V5 4/4] serial: sprd: adjust TIMEOUT to a big value

[Chunyan Zhang]

From: Wei Qiao <wei.qiao@spreadtrum.com>

SPRD_TIMEOUT was 256, which is too small to wait until the status
switched to workable in a while loop, so that the earlycon could
not work correctly.

Signed-off-by: Wei Qiao <wei.qiao@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 drivers/tty/serial/sprd_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index d98e3dc..90996ad 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -36,7 +36,7 @@
 #define SPRD_FIFO_SIZE		128
 #define SPRD_DEF_RATE		26000000
 #define SPRD_BAUD_IO_LIMIT	3000000
-#define SPRD_TIMEOUT		256
+#define SPRD_TIMEOUT		256000
 
 /* the offset of serial registers and BITs for them */
 /* data registers */
-- 
2.7.4

Re: [PATCH V5 2/4] dt-bindings: arm: Add bindings for SP9860G

[Chunyan Zhang]

Hello Greg,

I guess there will be no further comments on this patchset :), could
you please take the patches 2/3/4 through tty git?

Thanks,
Chunyan

On 27 March 2017 at 14:06, Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
> Added bindings for Spreadtrum SP9860G board and SC9860 SoC.
> This patch also revised bindings of SC9836 to make the format
> more clear.
>
> Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/arm/sprd.txt | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
> index 31a629d..3df034b 100644
> --- a/Documentation/devicetree/bindings/arm/sprd.txt
> +++ b/Documentation/devicetree/bindings/arm/sprd.txt
> @@ -1,11 +1,14 @@
>  Spreadtrum SoC Platforms Device Tree Bindings
>  ----------------------------------------------------
>
> -Sharkl64 is a Spreadtrum's SoC Platform which is based
> -on ARM 64-bit processor.
> +SC9836 openphone Board
> +Required root node properties:
> +       - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
>
> -SC9836 openphone board with SC9836 SoC based on the
> -Sharkl64 Platform shall have the following properties.
> +SC9860 SoC
> +Required root node properties:
> +       - compatible = "sprd,sc9860"
>
> +SP9860G 3GFHD Board
>  Required root node properties:
> -        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
> +       - compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html