[PATCH v6 12/12] ACPI / DSD: Document references, ports and endpoints

[Sakari Ailus <sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>]

Document the use of references into the hierarchical data extension
structure, as well as the use of port and endpoint concepts that are very
similar to those in Devicetree.

Signed-off-by: Sakari Ailus <sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Reviewed-by: Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 Documentation/acpi/dsd/graph.txt | 162 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 Documentation/acpi/dsd/graph.txt

diff --git a/Documentation/acpi/dsd/graph.txt b/Documentation/acpi/dsd/graph.txt
new file mode 100644
index 0000000..ac09e31
--- /dev/null
+++ b/Documentation/acpi/dsd/graph.txt
@@ -0,0 +1,162 @@
+Graphs
+
+
+_DSD
+----
+
+_DSD (Device Specific Data) [7] is a predefined ACPI device
+configuration object that can be used to convey information on
+hardware features which are not specifically covered by the ACPI
+specification [1][6]. There are two _DSD extensions that are relevant
+for graphs: property [4] and hierarchical data extensions [5]. The
+property extension provides generic key-value pairs whereas the
+hierarchical data extension supports nodes with references to other
+nodes, forming a tree. The nodes in the tree may contain properties as
+defined by the property extension. The two extensions together provide
+a tree-like structure with zero or more properties (key-value pairs)
+in each node of the tree.
+
+The data structure may be accessed at runtime by using the device_*
+and fwnode_* functions defined in include/linux/fwnode.h .
+
+Fwnode represents a generic firmware node object. It is independent on
+the firmware type. In ACPI, fwnodes are _DSD hierarchical data
+extensions objects. A device's _DSD object is represented by an
+fwnode.
+
+The data structure may be referenced to elsewhere in the ACPI tables
+by using a hard reference to the device itself and an index to the
+hierarchical data extension array on each depth.
+
+
+Ports and endpoints
+-------------------
+
+The port and endpoint concepts are very similar to those in Devicetree
+[3]. A port represents an interface in a device, and an endpoint
+represents a connection to that interface.
+
+All port nodes are located under the device's "_DSD" node in the
+hierarchical data extension tree. The property extension related to
+each port node must contain the key "port" and an integer value which
+is the number of the port. The object it refers to should be called "PRTX",
+where "X" is the number of the port.
+
+Further on, endpoints are located under the individual port nodes. The
+first hierarchical data extension package list entry of the endpoint
+nodes must begin with "endpoint" and must be followed by the number
+of the endpoint. The object it refers to should be called "EPXY", where
+"X" is the number of the port and "Y" is the number of the endpoint.
+
+Each port node contains a property extension key "port", the value of
+which is the number of the port node. The each endpoint is similarly numbered
+with a property extension key "endpoint". Port numbers must be unique within a
+device and endpoint numbers must be unique within a port.
+
+The endpoint reference uses property extension with "remote-endpoint" property
+name followed by a reference in the same package. Such references consist of the
+the remote device reference, number of the port in the device and finally the
+number of the endpoint in that port. Individual references thus appear as:
+
+    Package() { device, port_number, endpoint_number }
+
+The references to endpoints must be always done both ways, to the
+remote endpoint and back from the referred remote endpoint node.
+
+A simple example of this is show below:
+
+    Scope (\_SB.PCI0.I2C2)
+    {
+	Device (CAM0)
+	{
+	    Name (_DSD, Package () {
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () { "compatible", Package () { "nokia,smia" } },
+		},
+		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+		Package () {
+		    Package () { "port0", "PRT0" },
+		}
+	    })
+	    Name (PRT0, Package() {
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () { "port", 0 },
+		},
+		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+		Package () {
+		    Package () { "endpoint0", "EP00" },
+		}
+	    })
+	    Name (EP00, Package() {
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () { "endpoint", 0 },
+		    Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, 4, 0 } },
+		}
+	    })
+	}
+    }
+
+    Scope (\_SB.PCI0)
+    {
+	Device (ISP)
+	{
+	    Name (_DSD, Package () {
+		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+		Package () {
+		    Package () { "port4", "PRT4" },
+		}
+	    })
+
+	    Name (PRT4, Package() {
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () { "port", 4 }, /* CSI-2 port number */
+		},
+		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+		Package () {
+		    Package () { "endpoint0", "EP40" },
+		}
+	    })
+
+	    Name (EP40, Package() {
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package () { "endpoint", 0 },
+		    Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, 0, 0 } },
+		}
+	    })
+	}
+    }
+
+Here, the port 0 of the "CAM0" device is connected to the port 4 of
+the "ISP" device and vice versa.
+
+
+References
+----------
+
+[1] _DSD (Device Specific Data) Implementation Guide.
+    <URL:http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm>,
+    referenced 2016-10-03.
+
+[2] Devicetree. <URL:http://www.devicetree.org>, referenced 2016-10-03.
+
+[3] Documentation/devicetree/bindings/graph.txt
+
+[4] Device Properties UUID For _DSD.
+    <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
+    referenced 2016-10-04.
+
+[5] Hierarchical Data Extension UUID For _DSD.
+    <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf>,
+    referenced 2016-10-04.
+
+[6] Advanced Configuration and Power Interface Specification.
+    <URL:http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf>,
+    referenced 2016-10-04.
+
+[7] _DSD Device Properties Usage Rules.
+    Documentation/acpi/DSD-properties-rules.txt
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html