From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Herrenschmidt Subject: Re: [PATCH v6 2/5] irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed Date: Wed, 29 Mar 2017 07:50:16 +1100 Message-ID: <1490734216.3177.140.camel@kernel.crashing.org> References: <20170328051226.21677-1-brendanhiggins@google.com> <20170328051226.21677-3-brendanhiggins@google.com> <49a13bbc-aec3-a349-4323-3c8d2728c62f@arm.com> <1490692375.3177.119.camel@kernel.crashing.org> <91936f1a-0a0d-4091-b981-976503a6f7cd@arm.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <91936f1a-0a0d-4091-b981-976503a6f7cd-5wv7dgnIgG8@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Marc Zyngier , Brendan Higgins , wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org, joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org, vz-ChpfBGZJDbMAvxtiuMwx3w@public.gmane.org, mouse-Pma6HLj0uuo@public.gmane.org, clg-Bxea+6Xhats@public.gmane.org Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, 2017-03-28 at 10:40 +0100, Marc Zyngier wrote: > On 28/03/17 10:12, Benjamin Herrenschmidt wrote: > > On Tue, 2017-03-28 at 09:32 +0100, Marc Zyngier wrote: > > > I'm a bit concerned by this. It means that you can't even mask an > > > interrupt. Is that really what you intend to do? Or all that the HW can > > > do? If you cannot mask an interrupt, you're at the mercy of a screaming > > > device... > > > > This is not really an interrupt controller. It's a "summary" register > > that reflects the state of the 14 i2c controller interrupts. > > > > This approach does have the advantage of providing separate counters in > > /proc/interrupts which is rather nice, but it does have overhead. On > > those shittly little ARMv9 400Mhz cores it can be significant. > > > s/ARMv9/ARM9/, as we're still on variations of the ARMv8 architecture ;-) > It was a typo, I meant ARM9/ARMv5 :-) The 2 SOC families we are talking about (Aspeed 24xx and 25xx) are based on a ARM926EJ at 400Mhz and an ARM1176JZFS at 800Mhz respectively, so cycles do count :-) > A 400MHz ARM9 (which is either ARMv4 or ARMv5) is not too bad (hey, we > still have a couple of Versatile-ABs here...). Caches are pretty small > though. 16K/16K, no L2 :) > > I would personally have some kind of trick to register a single > > interrupt handler that calls directly the handlers of the respective > > i2c busses via a simple indirection for speed, maybe adding my custom > > sysfs or debugfs statistics. But that's just me trying to suck the last > > cycle out of the bloody thing ;-) > > I'd hope the irqdomain itself to be pretty light (the revmap should help > here), but of course you're going to do more work. Counters also come at > a cost. It'd be interesting to see if Brendan has any overhead data > about this. Thankfully, the HW supports buffered sends/receive or even DMA. The current patch doesn't yet support these but they would be a good way to alleviate the cost of the interrupts if it becomes a problem. Cheers, Ben. > Cheers, > > M. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html