From: Jagan Teki <jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
To: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>,
Michael Trimarchi
<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH v3 9/9] ARM: dts: imx6ul-isiot: Add FEC node support
Date: Thu, 6 Apr 2017 23:32:15 +0530 [thread overview]
Message-ID: <1491501735-1649-10-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491501735-1649-1-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add support for fec1 node on Engicam Is.IoT variant boards.
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v3:
- none
Changes for v2:
- Newly added patch
arch/arm/boot/dts/imx6ul-isiot.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index 7e947e5..ccc5477 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -129,6 +129,24 @@
status = "okay";
};
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
&pwm8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm8>;
@@ -159,6 +177,21 @@
};
&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-04-06 18:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-06 18:02 [PATCH v3 0/9] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Jagan Teki
2017-04-06 18:02 ` [PATCH v3 3/9] ARM: dts: imx6qdl-icore: Add Sound card with codec node Jagan Teki
[not found] ` <1491501735-1649-4-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2017-04-07 13:23 ` Shawn Guo
2017-04-06 18:02 ` [PATCH v3 4/9] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 " Jagan Teki
2017-04-06 18:02 ` [PATCH v3 5/9] ARM: dts: imx6qdl-icore-rqs: Replace to use simple-audio-card Jagan Teki
2017-04-06 18:02 ` [PATCH v3 6/9] ARM: dts: imx6dl-icore: Add LVDS support Jagan Teki
[not found] ` <1491501735-1649-1-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2017-04-06 18:02 ` [PATCH v3 1/9] ARM: dts: imx6ul-isiot: Add Sound card with codec node Jagan Teki
[not found] ` <1491501735-1649-2-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2017-04-07 13:16 ` Shawn Guo
2017-06-14 14:47 ` Jagan Teki
[not found] ` <CAMty3ZDj3XgeZwUTXTTX2svoXaNWJ3GJtbNAt9+jj+n8Z4640w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-15 2:20 ` Shawn Guo
2017-06-15 4:51 ` Jagan Teki
2017-06-15 7:15 ` Shawn Guo
2017-06-15 7:31 ` Jagan Teki
[not found] ` <CAMty3ZCwkP=EaFcSdA--yQNN9ebjE9JptfwWjQpceXqDq-xkyA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-06-15 7:51 ` Shawn Guo
2017-06-15 13:15 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 2/9] ARM: dts: imx6ul-geam: " Jagan Teki
[not found] ` <1491501735-1649-3-git-send-email-jagan-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
2017-04-07 13:19 ` Shawn Guo
2017-04-06 18:02 ` [PATCH v3 7/9] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki
2017-04-06 18:02 ` Jagan Teki [this message]
2017-04-06 18:02 ` [PATCH v3 8/9] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491501735-1649-10-git-send-email-jagan@openedev.com \
--to=jagan-orp2zojdm/rwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org \
--cc=michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).