From mboxrd@z Thu Jan 1 00:00:00 1970 From: Moritz Fischer Subject: [PATCH v5] dt-bindings: fpga: Add bindings document for Xilinx LogiCore PR Decoupler Date: Sun, 9 Apr 2017 10:10:31 -0700 Message-ID: <1491757831-10510-1-git-send-email-mdf@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-fpga-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Moritz Fischer , Michal Simek , =?UTF-8?q?S=C3=B6ren=20Brinkmann?= List-Id: devicetree@vger.kernel.org This adds the binding documentation for the Xilinx LogiCORE PR Decoupler soft core. Signed-off-by: Moritz Fischer Signed-off-by: Michal Simek Acked-by: Alan Tull Cc: Sören Brinkmann Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- Changes from v4: - Ssubject line - Replaced 'or' by 'followed by' as suggested by Rob Changes from v3: - Addressed Michal's comments - Addressed Alan's Comments - Added Alan's Acked-by Changes from v2: - Added refence to generic fpga-region bindings - Fixed up reg property in example - Added fallback to "xlnx,pr-decoupler" without version Changes from v1: - Added clock names & clock to example - Merged some of the description from Michal's version --- .../bindings/fpga/xilinx-pr-decoupler.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt new file mode 100644 index 0000000..b2c58fb --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt @@ -0,0 +1,36 @@ +Xilinx LogiCORE Partial Reconfig Decoupler Softcore + +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more +decouplers / fpga bridges. +The controller can decouple/disable the bridges which prevents signal +changes from passing through the bridge. The controller can also +couple / enable the bridges which allows traffic to pass through the +bridge normally. + +The Driver supports only MMIO handling. A PR region can have multiple +PR Decouplers which can be handled independently or chained via decouple/ +decouple_status signals. + +Required properties: +- compatible : Should contain "xlnx,pr-decoupler-1.00" followed by + "xlnx,pr-decoupler" +- regs : base address and size for decoupler module +- clocks : input clock to IP +- clock-names : should contain "aclk" + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings. + +Example: + fpga-bridge@100000450 { + compatible = "xlnx,pr-decoupler-1.00", + "xlnx-pr-decoupler"; + regs = <0x10000045 0x10>; + clocks = <&clkc 15>; + clock-names = "aclk"; + bridge-enable = <0>; + }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html