From: <jiada_wang@mentor.com>
To: broonie@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Jiada Wang <jiada_wang@mentor.com>
Subject: [PATCH RFC 4/5] ARM: dts: imx: change compatiblity for SPI controllers on imx53 later soc
Date: Thu, 13 Apr 2017 05:14:03 -0700 [thread overview]
Message-ID: <1492085644-4195-5-git-send-email-jiada_wang@mentor.com> (raw)
In-Reply-To: <1492085644-4195-1-git-send-email-jiada_wang@mentor.com>
From: Jiada Wang <jiada_wang@mentor.com>
for SPI controllers on imx53 and later SoCs, there is HW issue when
work in slave mode, as new device type 'IMX53_ECSPI' has been added
for these SPI controllers which is compatible with 'fsl,imx53-ecspi'.
This patch updates DTS to make imx53 later SPI controller only be
compatibile with 'fsl,imx53-ecspi'.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sx.dtsi | 8 ++++----
arch/arm/boot/dts/imx6ul.dtsi | 8 ++++----
6 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 2e516f4..9eeafb9 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -243,7 +243,7 @@
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
@@ -662,7 +662,7 @@
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index e9a5d0b..7373671 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -90,7 +90,7 @@
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6Q_CLK_ECSPI5>,
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 6d7bf64..4a4b509 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -265,7 +265,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
@@ -279,7 +279,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
@@ -293,7 +293,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
@@ -307,7 +307,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index cc9572e..1d1200c 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -168,7 +168,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
@@ -180,7 +180,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
@@ -192,7 +192,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
@@ -204,7 +204,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index dd4ec85..c115ed3 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -251,7 +251,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI1>,
@@ -263,7 +263,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI2>,
@@ -275,7 +275,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI3>,
@@ -287,7 +287,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index b9d7d2d..d35ad5b 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -204,7 +204,7 @@
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI1>,
@@ -216,7 +216,7 @@
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI2>,
@@ -228,7 +228,7 @@
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI3>,
@@ -240,7 +240,7 @@
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI4>,
--
2.7.4
next prev parent reply other threads:[~2017-04-13 12:14 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-13 12:13 [PATCH RFC 0/5] *** SPI Slave mode support *** jiada_wang
[not found] ` <1492085644-4195-1-git-send-email-jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-04-13 12:14 ` [PATCH RFC 1/5] spi: core: add support to work in Slave mode jiada_wang-nmGgyN9QBj3QT0dZR+AlfA
2017-04-13 12:59 ` [PATCH RFC 0/5] *** SPI Slave mode support *** Mark Brown
[not found] ` <20170413125929.dygodgj6c35ydh5p-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2017-04-13 19:47 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUm=90ddNWM5KWqT+W0hqZ-QO6vPHj5OisbYquDYq1ZmA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-14 5:39 ` Jiada Wang
[not found] ` <58F06092.9080409-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-04-24 10:55 ` Geert Uytterhoeven
2017-04-24 12:48 ` Jiada Wang
2017-04-24 13:10 ` Geert Uytterhoeven
[not found] ` <CAMuHMdVQS494-BAc-W-XOOLK8Xow85n+Cgih0FG+t4QxCFxhMA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-25 7:56 ` Jiada Wang
2017-04-25 8:07 ` Uwe Kleine-König
2017-04-25 8:09 ` Geert Uytterhoeven
2017-04-25 10:31 ` Mark Brown
2017-04-27 6:43 ` Jiada Wang
[not found] ` <59019306.2050309-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2017-05-24 17:29 ` Mark Brown
2017-05-29 12:01 ` Fabio Estevam
[not found] ` <CAOMZO5A-31iC5NrGePZCcgsNNwpvURq4LpztQai4GaWRrJXbmA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-05-30 2:53 ` Jiada Wang
2017-04-13 12:14 ` [PATCH RFC 2/5] spi: spidev: use different name for SPI controller slave mode device jiada_wang
2017-04-13 12:14 ` [PATCH RFC 3/5] spi: imx: add selection for iMX53 and iMX6 controller jiada_wang
2017-04-13 12:14 ` jiada_wang [this message]
2017-04-13 12:14 ` [PATCH RFC 5/5] spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips jiada_wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492085644-4195-5-git-send-email-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).