From: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>,
Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>,
Lorenzo Pieralisi
<lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH] ARM: dts: vexpress: fix few unit address format warnings
Date: Tue, 18 Apr 2017 18:45:07 +0100 [thread overview]
Message-ID: <1492537507-7783-1-git-send-email-sudeep.holla@arm.com> (raw)
This patch fixes the following set of warnings on vexpress platforms:
sysreg@010000 simple-bus unit address format error, expected "10000"
sysctl@020000 simple-bus unit address format error, expected "20000"
i2c@030000 simple-bus unit address format error, expected "30000"
aaci@040000 simple-bus unit address format error, expected "40000"
mmci@050000 simple-bus unit address format error, expected "50000"
kmi@060000 simple-bus unit address format error, expected "60000"
kmi@070000 simple-bus unit address format error, expected "70000"
uart@090000 simple-bus unit address format error, expected "90000"
uart@0a0000 simple-bus unit address format error, expected "a0000"
uart@0b0000 simple-bus unit address format error, expected "b0000"
uart@0c0000 simple-bus unit address format error, expected "c0000"
wdt@0f0000 simple-bus unit address format error, expected "f0000"
Cc: Liviu Dudau <liviu.dudau-5wv7dgnIgG8@public.gmane.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Sudeep Holla <sudeep.holla-5wv7dgnIgG8@public.gmane.org>
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2m.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 18 +++++++++---------
arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 2 +-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
6 files changed, 36 insertions(+), 36 deletions(-)
Hi,
I observed few warning in linux-next due to the enhanced DTC checks
introduced with DTC upgrade in linux-next. The patch fixes few warnings
Regards,
Sudeep
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 3086efacd00e..35714ff6f467 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -71,7 +71,7 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
@@ -94,7 +94,7 @@
};
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -106,7 +106,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@030000 {
+ v2m_i2c_pcie: i2c@30000 {
compatible = "arm,versatile-i2c";
reg = <0x030000 0x1000>;
@@ -119,7 +119,7 @@
};
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -127,7 +127,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -139,7 +139,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -147,7 +147,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -155,7 +155,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -163,7 +163,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -171,7 +171,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -179,7 +179,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -187,7 +187,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index c6393d3f1719..1b6f6393be93 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -70,7 +70,7 @@
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
- v2m_sysreg: sysreg@00000 {
+ v2m_sysreg: sysreg@0 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
@@ -93,7 +93,7 @@
};
};
- v2m_sysctl: sysctl@01000 {
+ v2m_sysctl: sysctl@1000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
@@ -105,7 +105,7 @@
};
/* PCI-E I2C bus */
- v2m_i2c_pcie: i2c@02000 {
+ v2m_i2c_pcie: i2c@2000 {
compatible = "arm,versatile-i2c";
reg = <0x02000 0x1000>;
@@ -118,7 +118,7 @@
};
};
- aaci@04000 {
+ aaci@4000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
@@ -126,7 +126,7 @@
clock-names = "apb_pclk";
};
- mmci@05000 {
+ mmci@5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
@@ -138,7 +138,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@06000 {
+ kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
@@ -146,7 +146,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@07000 {
+ kmi@7000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
@@ -154,7 +154,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@09000 {
+ v2m_serial0: uart@9000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
@@ -162,7 +162,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a000 {
+ v2m_serial1: uart@a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
@@ -170,7 +170,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b000 {
+ v2m_serial2: uart@b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
@@ -178,7 +178,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c000 {
+ v2m_serial3: uart@c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
@@ -186,7 +186,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f000 {
+ wdt@f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index 15f4fd3f4695..0c8de0ca73ee 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -220,7 +220,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index bd107c5a0226..65ecf206388c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -385,7 +385,7 @@
};
};
- etb@0,20010000 {
+ etb@20010000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -399,7 +399,7 @@
};
};
- tpiu@0,20030000 {
+ tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
@@ -449,7 +449,7 @@
};
};
- funnel@0,20040000 {
+ funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
@@ -513,7 +513,7 @@
};
};
- ptm@0,2201c000 {
+ ptm@2201c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201c000 0 0x1000>;
@@ -527,7 +527,7 @@
};
};
- ptm@0,2201d000 {
+ ptm@2201d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2201d000 0 0x1000>;
@@ -541,7 +541,7 @@
};
};
- etm@0,2203c000 {
+ etm@2203c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203c000 0 0x1000>;
@@ -555,7 +555,7 @@
};
};
- etm@0,2203d000 {
+ etm@2203d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203d000 0 0x1000>;
@@ -569,7 +569,7 @@
};
};
- etm@0,2203e000 {
+ etm@2203e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0x2203e000 0 0x1000>;
@@ -583,7 +583,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 1acecaf4b13d..6e69b8e6c1a7 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -190,7 +190,7 @@
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index b608a03ee02f..c9305b58afc2 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -300,7 +300,7 @@
};
};
- smb@04000000 {
+ smb@4000000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-04-18 17:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-18 17:45 Sudeep Holla [this message]
[not found] ` <1492537507-7783-1-git-send-email-sudeep.holla-5wv7dgnIgG8@public.gmane.org>
2017-04-19 10:07 ` [PATCH] ARM: dts: vexpress: fix few unit address format warnings Liviu Dudau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492537507-7783-1-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla-5wv7dgnigg8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=liviu.dudau-5wv7dgnIgG8@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).