[PATCH 6/8] [RFC] arm64: dts: renesas: Migrate R-Car M3-W Salvator-X to r8j7796-2x2g.dtsi

[Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>]

The Renesas R-Car M3-W Salvator-X development board is equipped with an
r8j7796 SiP with 4 GiB of RAM.

Hence migrate from r8a7796.dtsi to r8j7796-2x2g.dtsi.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Questions:
  - Should this file be renamed to r8j7796-salvator-x.dts?
---
 arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 7f0ac6a9d49b8da6..26f5ff938bd2728d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -9,12 +9,12 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8j7796-2x2g.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Renesas Salvator-X board based on r8a7796";
-	compatible = "renesas,salvator-x", "renesas,r8a7796";
+	model = "Renesas Salvator-X board based on r8j7796";
+	compatible = "renesas,salvator-x", "renesas,r8j7796", "renesas,r8a7796";
 
 	aliases {
 		serial0 = &scif2;
@@ -27,17 +27,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x78000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x0 0x80000000>;
-	};
-
 	reg_1p8v: regulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html