[PATCH] arm64: dts: freescale: ls2081ardb: Add DTS support for NXP LS2081ARDB

[PATCH] arm64: dts: freescale: ls2081ardb: Add DTS support for NXP LS2081ARDB

[Priyanka Jain]

This patch add support for NXP LS2081ARDB board which has
LS2081A SoC.

LS2081A SoC is 40-pin derivative of LS2088A SoC
So, from functional perspective both are same.
Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts

Signed-off-by: Priyanka Jain <priyanka.jain-3arQi8VN3Tc@public.gmane.org>
---
 arch/arm64/boot/dts/freescale/Makefile            |    1 +
 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts |  139 +++++++++++++++++++++
 2 files changed, 140 insertions(+), 0 deletions(-)
 create mode 100755 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 72c4b52..58b80de 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
new file mode 100444
index 0000000..7ae408e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,139 @@
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright (C) 2017, NXP Semiconductors
+ *
+ * Priyanka Jain <priyanka.jain-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 2081A RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+
+&qspi {
+	status = "okay";
+	flash0: n25q512a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash1: n25q512a@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arm64: dts: freescale: ls2081ardb: Add DTS support for NXP LS2081ARDB

[Yang Li]

We probably should rename the freescale folder to nxp with a separate
patch, but it is better to stop using the name in the patch title
right now.

On Wed, Apr 19, 2017 at 11:37 PM, Priyanka Jain <priyanka.jain-3arQi8VN3Tc@public.gmane.org> wrote:
> This patch add support for NXP LS2081ARDB board which has
> LS2081A SoC.
>
> LS2081A SoC is 40-pin derivative of LS2088A SoC
> So, from functional perspective both are same.
> Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
>
> Signed-off-by: Priyanka Jain <priyanka.jain-3arQi8VN3Tc@public.gmane.org>
> ---
>  arch/arm64/boot/dts/freescale/Makefile            |    1 +
>  arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts |  139 +++++++++++++++++++++
>  2 files changed, 140 insertions(+), 0 deletions(-)
>  create mode 100755 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 72c4b52..58b80de 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> new file mode 100444
> index 0000000..7ae408e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> @@ -0,0 +1,139 @@
> +/*
> + * Device Tree file for NXP LS2081A RDB Board.
> + *
> + * Copyright (C) 2017, NXP Semiconductors

The formal copyright claim formal should be
Copyright 2017 NXP

> + *
> + * Priyanka Jain <priyanka.jain-3arQi8VN3Tc@public.gmane.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "fsl-ls2088a.dtsi"
> +
> +/ {
> +       model = "NXP Layerscape 2081A RDB Board";
> +       compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
> +
> +       aliases {
> +               serial0 = &serial0;
> +               serial1 = &serial1;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial1:115200n8";
> +       };
> +};
> +
> +&esdhc {
> +       status = "okay";
> +};
> +
> +&ifc {
> +       status = "disabled";
> +};
> +
> +&i2c0 {
> +       status = "okay";
> +       pca9547@75 {
> +               compatible = "nxp,pca9547";
> +               reg = <0x75>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               i2c@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x01>;
> +                       rtc@51 {
> +                               compatible = "nxp,pcf2129";
> +                               reg = <0x51>;
> +                       };
> +               };
> +
> +               i2c@3 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x3>;
> +
> +                       adt7481@4c {
> +                               compatible = "adi,adt7461";
> +                               reg = <0x4c>;
> +                       };
> +               };
> +       };
> +};
> +
> +&dspi {
> +       status = "okay";
> +       dflash0: n25q512a {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               compatible = "st,m25p80";
> +               spi-max-frequency = <3000000>;
> +               reg = <0>;
> +       };
> +};
> +
> +
> +&qspi {
> +       status = "okay";
> +       flash0: n25q512a@0 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               compatible = "st,m25p80";
> +               spi-max-frequency = <20000000>;
> +               reg = <0>;
> +       };
> +       flash1: n25q512a@1 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               compatible = "st,m25p80";
> +               spi-max-frequency = <20000000>;
> +               reg = <0>;
> +       };
> +};
> +
> +&usb0 {
> +       status = "okay";
> +};
> +
> +&usb1 {
> +       status = "okay";
> +};
> --
> 1.7.4.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
- Leo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH] arm64: dts: freescale: ls2081ardb: Add DTS support for NXP LS2081ARDB

[Priyanka Jain]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 7895 bytes --]



> -----Original Message-----
> From: Yang Li [mailto:pku.leo@gmail.com]
> Sent: Monday, April 24, 2017 10:51 PM
> To: Priyanka Jain <priyanka.jain@nxp.com>
> Cc: devicetree@vger.kernel.org; Rob Herring <robh@kernel.org>; Mark Rutland
> <mark.rutland@arm.com>; Shawn Guo <shawnguo@kernel.org>; linux-arm-
> kernel@lists.infradead.org; Leo Li <leoyang.li@nxp.com>
> Subject: Re: [PATCH] arm64: dts: freescale: ls2081ardb: Add DTS support for NXP
> LS2081ARDB
> 
> We probably should rename the freescale folder to nxp with a separate patch,
> but it is better to stop using the name in the patch title right now.
> 
OK, I will correct this
> On Wed, Apr 19, 2017 at 11:37 PM, Priyanka Jain <priyanka.jain@nxp.com>
> wrote:
> > This patch add support for NXP LS2081ARDB board which has LS2081A SoC.
> >
> > LS2081A SoC is 40-pin derivative of LS2088A SoC So, from functional
> > perspective both are same.
> > Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
> >
> > Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/Makefile            |    1 +
> >  arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts |  139
> > +++++++++++++++++++++
> >  2 files changed, 140 insertions(+), 0 deletions(-)  create mode
> > 100755 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 72c4b52..58b80de 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
> >  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb diff --git
> > a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> > b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> > new file mode 100444
> > index 0000000..7ae408e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
> > @@ -0,0 +1,139 @@
> > +/*
> > + * Device Tree file for NXP LS2081A RDB Board.
> > + *
> > + * Copyright (C) 2017, NXP Semiconductors
> 
> The formal copyright claim formal should be Copyright 2017 NXP
> 
OK, I will correct this
Priyanka
> > + *
> > + * Priyanka Jain <priyanka.jain@nxp.com>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPLv2 or the X11 license, at your option. Note that this
> > + dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This library is free software; you can redistribute it and/or
> > + *     modify it under the terms of the GNU General Public License as
> > + *     published by the Free Software Foundation; either version 2 of the
> > + *     License, or (at your option) any later version.
> > + *
> > + *     This library is distributed in the hope that it will be useful,
> > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *     GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + *  b) Permission is hereby granted, free of charge, to any person
> > + *     obtaining a copy of this software and associated documentation
> > + *     files (the "Software"), to deal in the Software without
> > + *     restriction, including without limitation the rights to use,
> > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > + *     sell copies of the Software, and to permit persons to whom the
> > + *     Software is furnished to do so, subject to the following
> > + *     conditions:
> > + *
> > + *     The above copyright notice and this permission notice shall be
> > + *     included in all copies or substantial portions of the Software.
> > + *
> > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
> KIND,
> > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
> WARRANTIES
> > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
> COPYRIGHT
> > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
> OR
> > + *     OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "fsl-ls2088a.dtsi"
> > +
> > +/ {
> > +       model = "NXP Layerscape 2081A RDB Board";
> > +       compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
> > +
> > +       aliases {
> > +               serial0 = &serial0;
> > +               serial1 = &serial1;
> > +       };
> > +
> > +       chosen {
> > +               stdout-path = "serial1:115200n8";
> > +       };
> > +};
> > +
> > +&esdhc {
> > +       status = "okay";
> > +};
> > +
> > +&ifc {
> > +       status = "disabled";
> > +};
> > +
> > +&i2c0 {
> > +       status = "okay";
> > +       pca9547@75 {
> > +               compatible = "nxp,pca9547";
> > +               reg = <0x75>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               i2c@1 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <0x01>;
> > +                       rtc@51 {
> > +                               compatible = "nxp,pcf2129";
> > +                               reg = <0x51>;
> > +                       };
> > +               };
> > +
> > +               i2c@3 {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +                       reg = <0x3>;
> > +
> > +                       adt7481@4c {
> > +                               compatible = "adi,adt7461";
> > +                               reg = <0x4c>;
> > +                       };
> > +               };
> > +       };
> > +};
> > +
> > +&dspi {
> > +       status = "okay";
> > +       dflash0: n25q512a {
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               compatible = "st,m25p80";
> > +               spi-max-frequency = <3000000>;
> > +               reg = <0>;
> > +       };
> > +};
> > +
> > +
> > +&qspi {
> > +       status = "okay";
> > +       flash0: n25q512a@0 {
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               compatible = "st,m25p80";
> > +               spi-max-frequency = <20000000>;
> > +               reg = <0>;
> > +       };
> > +       flash1: n25q512a@1 {
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               compatible = "st,m25p80";
> > +               spi-max-frequency = <20000000>;
> > +               reg = <0>;
> > +       };
> > +};
> > +
> > +&usb0 {
> > +       status = "okay";
> > +};
> > +
> > +&usb1 {
> > +       status = "okay";
> > +};
> > --
> > 1.7.4.1
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree"
> > in the body of a message to majordomo@vger.kernel.org More majordomo
> > info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 
> --
> - Leo
N‹§²æìr¸›yúèšØb²X¬¶Ç§vØ^–)Þº{.nÇ+‰·zøœzÚÞz)í…æèw*\x1fjg¬±¨\x1e¶‰šŽŠÝ¢j.ïÛ°\½½MŽúgjÌæa×\x02››–' ™©Þ¢¸\f¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾\a«‘êçzZ+ƒùšŽŠÝ¢j"ú!¶i