From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH/RFC 0/5] arm64: dts: renesas: Break out common board support
Date: Fri, 21 Apr 2017 14:55:16 +0200 [thread overview]
Message-ID: <1492779321-23939-1-git-send-email-geert+renesas@glider.be> (raw)
Hi all,
The Renesas Salvator-X and ULCB development board can be equipped with
either an R-Car H3 or M3-W SiP, which are pin-compatible. All boards
use separate DTBs, but currently there's no sharing of board-specific
devices in DTS.
This series reduces duplication by extracting common board support into
their own .dtsi files. As the level of support varies across boards and
SoCs, this requires the addition of a few external clocks and
placeholder devices on R-Car M3-W, so the common board support DTS can
refer to them.
- Patches 1 and 2 add the external audio and PCIe bus clocks on R-Car
M3-W, which are present in r8a7795.dtsi, and used in
r8a7795-salvator-x.dts,
- RFC patch 3 adds placeholders for devices that are not yet supported
and/or tested on R-Car M3-W, but used on R-Car H3,
- RFC patch 4 extracts common Salvator-X board support,
- RFC patch 5 extracts common ULCB board support.
For R-Car H3 based boards, there are no functional changes.
For R-Car M3-W based boards, some new devices are now described in DT.
Dependencies:
- renesas-devel-20170420-v4.11-rc7,
- Patches 1 and 2 can be applied as-is,
- Patches 4 and 5 depend on "[PATCH 0/8] arm64: dts: renesas: Break
out R-Car H3 and M3-W SiP"
(http://www.spinics.net/lists/devicetree/msg173820.html).
DTB changes have been inspected using scripts/dtc/dtx_diff.
This has been tested on Salvator-X (both H3 and M3-W).
This has not been tested on H3ULCB and M3ULCB due to lack of hardware.
Thanks for your comments!
Geert Uytterhoeven (5):
arm64: renesas: r8a7796: Add external audio clocks
arm64: renesas: r8a7796: Add external PCIe bus clock
[RFC] arm64: dts: r8a7796: Add placeholders for various devices
[RFC] arm64: dts: renesas: Extract common Salvator-X board support
[RFC] arm64: dts: renesas: Extract common ULCB board support
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 341 +-------------
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 522 +--------------------
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 201 +-------
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 259 +---------
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 112 +++++
.../{r8a7795-salvator-x.dts => salvator-x.dtsi} | 372 +++++++--------
.../dts/renesas/{r8a7795-h3ulcb.dts => ulcb.dtsi} | 243 +++++-----
7 files changed, 421 insertions(+), 1629 deletions(-)
copy arch/arm64/boot/dts/renesas/{r8a7795-salvator-x.dts => salvator-x.dtsi} (95%)
copy arch/arm64/boot/dts/renesas/{r8a7795-h3ulcb.dts => ulcb.dtsi} (96%)
--
2.7.4
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2017-04-21 12:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-21 12:55 Geert Uytterhoeven [this message]
[not found] ` <1492779321-23939-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2017-04-21 12:55 ` [PATCH 1/5] arm64: renesas: r8a7796: Add external audio clocks Geert Uytterhoeven
2017-04-23 23:56 ` Kuninori Morimoto
2017-04-21 12:55 ` [PATCH 2/5] arm64: renesas: r8a7796: Add external PCIe bus clock Geert Uytterhoeven
2017-04-21 12:55 ` [PATCH/RFC 3/5] arm64: dts: r8a7796: Add placeholders for various devices Geert Uytterhoeven
2017-04-21 12:55 ` [PATCH/RFC 4/5] arm64: dts: renesas: Extract common Salvator-X board support Geert Uytterhoeven
2017-04-21 12:55 ` [PATCH/RFC 5/5] arm64: dts: renesas: Extract common ULCB " Geert Uytterhoeven
2017-04-24 7:25 ` [PATCH/RFC 0/5] arm64: dts: renesas: Break out common " Geert Uytterhoeven
2017-04-26 8:06 ` Simon Horman
2017-04-26 8:11 ` Geert Uytterhoeven
2017-04-26 8:56 ` Simon Horman
2017-04-27 13:32 ` Geert Uytterhoeven
[not found] ` <CAMuHMdV1SQoeEACaNLZbByRLbosMj5oxEysNDVevYgxqStDaug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-28 7:04 ` Simon Horman
2017-04-28 7:11 ` Geert Uytterhoeven
2017-04-28 7:32 ` Simon Horman
[not found] ` <20170428073256.GG10196-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2017-04-28 12:28 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492779321-23939-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).